Install Right and Left Rear Mounts
1.Attach right rear mount (1) to the tractor clutch housing using two cap screws (12) and hardened flat washers (14) in the top holes and two cap screws (16) hardened flat washers (14) in the lower two holes.
2.Repeat to install left rear mount (2).
1.1026490 Right rear mount
2.1026491 Left rear mount
12.300517 3/4 NC x
14.57798 3/4 Hardened flat washer
16.735 3/4 NC x 2 HHCS GR5
14
12
DP1
14
16
Figure 1. Rear Mount Installation | Figure 2. Left rear Mount Installed |
|
(Rev. 05/18/2010)
MAN0064 (Rev. 7/20/2007)