Woods Equipment 111877 Mount Installation, Install Front Mount, Install Right and Left Side rails

Install Front Mount

1.Insert four (two per side) carriage bolts (13) into upper holes of front mount prior to attaching to tractor. Carriage bolts should be inserted from the inside pointing outward.

2.Attach front support (3) to tractor, using two cap screws (17) and hardened flat washers (15).

3.1001642 Front mount

13.301130 5/8 NC x 1-1/2 Carriage bolt GR5

15.57817 5/8 Hardened flat washer

17.902 5/8 NC x 2 HHCS GR5

13

15

DP2 17

Figure 3. Front Mount Installed

Install Right and Left Side rails

1.Place front holes of right side rail (4) over carriage bolts (13) and front mount and secure with hard- ened flat washers (15) and hex nuts (10).

2.Attach side rail to inside of rear mount, using four carriage bolts (13), hardened flat washers (15) and hex nuts (10).

Carriage bolts must be installed with heads on inside of rear mount as shown in Figure 6.

3.Repeat steps to install left side rail (5).

4.1026492 Right side rail

5.1026493 Left side rail

10.230 5/8 NC Hex nut

13.301130 5/8 NC x 1-1/2 Carriage bolt GR5

15.57817 5/8 Hardened flat washer

Figure 4. Right Side Rail Installation

13

15

10

DP3

13

DP4

15

10

Figure 5. Side Rail to Front Mount

Figure 6. Side Rail to Rear Mount

6 Mount Installation

(Rev. 05/18/2010)

MAN0064 (Rev. 7/20/2007)