Yard Machines OEM-190-032 Mounting Auger Housing, Attaching the Support Tubes, Inset a Inset B

Page 17

Inset A

Inset B

Figure 27

7

Mounting

Auger

Housing

All Models

WARNING

Before installing attachment, place tractor on a firm and level surface. Place

Mounting Auger Assembly

1.Position the auger housing assembly in front of the tractor as seen in Figure 27. Lay the belt and support tubes out as seen above.

IMPORTANT: If you are installing this snow thrower attachment on any mower model with a letter designation (i.e. 60R or 80R, 80T, etc.) then the heat shield on the auger housing must be removed. Do not remove this heat shield on any other model of mower. To determine your model number, see page 2-3 of this manual.

IMPORTANT: It will be necessary to have a second person assist you to complete the following steps.

2.Carefully move the tractor forward (by pushing, NOT driving it) so that the support tubes found on the rear of the auger hous- ing assembly are positioned between the tractor’s front tires. Set the parking brake.

WARNING: Before installing attach- ment, place tractor on a firm and level surface. Place the PTO in the disengaged (OFF) position, set the parking brake, shut engine off and remove key to prevent unintended starting.

3.With the help of an assistant, lift up the auger housing up and move the attachment back aligning the hooks found on the rear of the lift assembly over the shoulder bolts found on both the left and the right sides of the tractor’s front pivot support brackets. See Figure 27 Inset A.

4.Maneuver the auger housing until the mounting holes lineup. Insert a clevis pin from your hardware pack and secure with a click pin, into the tractor’s front pivot support brackets seen in Figure 27 Inset B.

5.Repeat Step 4 on the left side, inserting a clevis pin secured with a click pin.

Attaching the Support

Tubes

1.Secure the right support tube to the front of the undercarriage assembly with the clevis pin and hairpin clip removed earlier. See Figure 28.

2.Repeat the previous step on the left side.

Figure 28

the PTO in the disen- gaged (OFF) position, set the parking brake, shut engine off and remove key to prevent unintended starting.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents OPERATOR’S Manual Customer Support Finding and Recording Model NumberDetermine The Model Your Rider FastAttach Snow Thrower Attachment To The OwnerRider Model Identification Sample Model NumberYour Responsibility Restrict the use TrainingPreparationOperation Maintenance & StorageYour Responsibility Do not modify engineCarton Contents Contents of Carton Idler Pulley and Pin MountingManual PTO Tractors equipped with Or 42-inch deck onlyReversing Idler Assembly Hardware AssemblyMounting the Belt Keeper With a 46-inch deck onlyModel Series 600-649 All 800 series Cub Cadet 11C & 13C Undercarriage Assembly all tractors42, 46, 50, 54 inch Decks With Electric PTO Upper V-belt 754-0371AModel Series 600-649 Cub Cadet 11C 38 & 42-inch Undercarriage AssemblyDeck Size Mounting Undercarriage AssemblyUpper Drive Belt Reference Chart Lift Arm Clevis Pin Bracket Assembly Bracket Undercarriage AssemblyModel Series 700-799 PTO Cable Belt Keeper Pin Flange Lock Nut & Washer SlottedRemove Nut Hairpin Clip Mounting the Undercarriage AssemblyPin Attaching the Chute Directional Control Assembling ControlsAttaching Lift Handle Attaching the ReflectorsInset a Inset B Mounting Auger HousingAttaching the Support Tubes All electric PTO Belt RoutingVarious Models Decks 42, 46, 50Routing the Lower Drive Belt All Tractors Models Routing the Upper Drive Belt Older Style TractorsLeft Side Undercarriage Spindle Pulley Double-Idler Bracket Right SideQuickly Engaging the Augers ImpellerChute Directional Control Tire Chain Kit Number OperationMaking Adjustments AdjustmentsLift Adjustment Lower Chute Crank Support Bracket AdjustmentMaintenance MaintenanceBefore lubricating Repairing, or Lubrication Chute Directional ControlPage Snow Thrower 40 B Snow Thrower Attachment 12 8 Belt Guard Page Page MANUFACTURER’S Limited Warranty for
Top Page Image Contents