Yard Machines OEM-190-032 warranty Routing the Upper Drive Belt Older Style Tractors

Page 19

Routing the Upper Drive Belt (Older Style Tractors )

46 inch Manual Older Style Setup

42 in. Electric and Manual Older Style Setup

Figure 31

1.Attach and route the proper upper drive belt (refer to the table on page 12) around the spindle pulley and idler pulley found on the undercarriage, the lower portion of the engine pulley and the two pulleys found on the PTO double-idler bracket as illustrated in Figure 31. Make sure that the belt is routed to the INSIDE of all belt keepers on the idler pulleys and the keeper pins found around the spindle pulley

IMPORTANT: Make certain that the flat side of the belt is facing outward. This allows the “V” side of the belt to ride snugly in both pulleys.

8

Belt

Routing

Various Models

WARNING

Before installing attachment, place tractor on a firm and level surface. Place the PTO in the disen- gaged (OFF) position, set the parking brake, shut engine off and remove key to prevent unintended starting.

Routing the Lower Drive Belt (All Tractors Models)

Left Side

Undercarriage

Snow Thrower Drive Pulley

Spindle Pulley

Double-Idler Bracket

 

Right Side

Figure 32

1.Attach and route the lower drive belt around the lower pulley on the spindle assembly, both pulleys on the double- idler bracket found beneath the undercarriage, and the drive pulley found on the rear of the snow thrower housing as illustrated in Figure 32.

2.Attach the tension spring (found on the undercarriage double-idler bracket) to the hex screw if it is not already attached.

IMPORTANT:

Make certain that the flat side of the belt is facing outward. This allows the “V” side of the belt to ride snugly

in both pulleys.

19

Image 19
Contents OPERATOR’S Manual Customer Support Finding and Recording Model NumberSample Model Number FastAttach Snow Thrower Attachment To The OwnerDetermine The Model Your Rider Rider Model IdentificationYour Responsibility Restrict the use TrainingPreparationDo not modify engine Maintenance & StorageOperation Your ResponsibilityCarton Contents Contents of Carton Or 42-inch deck only MountingIdler Pulley and Pin Manual PTO Tractors equipped withWith a 46-inch deck only AssemblyReversing Idler Assembly Hardware Mounting the Belt KeeperUpper V-belt 754-0371A Undercarriage Assembly all tractorsModel Series 600-649 All 800 series Cub Cadet 11C & 13C 42, 46, 50, 54 inch Decks With Electric PTOModel Series 600-649 Cub Cadet 11C 38 & 42-inch Undercarriage AssemblyUpper Drive Belt Reference Chart Mounting Undercarriage AssemblyDeck Size Lift Arm Clevis Pin PTO Cable Belt Keeper Pin Flange Lock Nut & Washer Slotted Bracket Undercarriage AssemblyBracket Assembly Model Series 700-799Pin Mounting the Undercarriage AssemblyRemove Nut Hairpin Clip Attaching the Reflectors Assembling ControlsAttaching the Chute Directional Control Attaching Lift HandleAttaching the Support Tubes Mounting Auger HousingInset a Inset B Decks 42, 46, 50 Belt RoutingAll electric PTO Various ModelsSpindle Pulley Double-Idler Bracket Right Side Routing the Upper Drive Belt Older Style TractorsRouting the Lower Drive Belt All Tractors Models Left Side UndercarriageChute Directional Control Engaging the Augers ImpellerQuickly Tire Chain Kit Number OperationLower Chute Crank Support Bracket Adjustment AdjustmentsMaking Adjustments Lift AdjustmentLubrication Chute Directional Control MaintenanceMaintenance Before lubricating Repairing, orPage Snow Thrower 40 B Snow Thrower Attachment 12 8 Belt Guard Page Page MANUFACTURER’S Limited Warranty for