Yard Machines OEM-190-032 warranty Reversing Idler Assembly Hardware, Mounting the Belt Keeper

Page 9

Flange Nut, Washer &

Shoulder Spacer

Double-idler Bracket/Front Pulley

Figure 5

3-in. Hex Bolt

Undercarriage

Spacers

Shoulder Spacer

 

(Facing Up)

 

Flat Washer

Shoulder Spacer

(Facing Down)

Flange Nut

 

 

Figure 6

Bell Washer

Jam Nut

Figure 7

Reversing the

Idler Assembly Hardware

(Manual PTO Garden Tractors

equipped with a 46-inch deck ONLY)

If you’re mounting this snow thrower attachment to a tractor equipped with any deck other than a manually engaged 46-inch, proceed to either:

1.Mounting the Idler Assembly (for tractors equipped with a 42, 46, 50 & 54-inch deck ONLY) in this section

2.Mounting the Idler Pulley and Pin (for Manual PTO tractors equipped with a 38- or 42-inch deck ONLY) previously in this section, or

3.Mounting the Undercarriage Assembly (all tractors not mentioned above) on page 12.

These instructions are for mounting this snow thrower attachment to a GARDEN TRACTOR (Model Series

800)equipped with a Manual PTO and a 46-inch deck.

NOTE: If you own a Manual PTO Lawn Tractor with

a46-inch deck, you can disregard the following steps; they are unnecessary. A LAWN TRACTOR is any 600- 649 Series mower, an 800 Series mower is a GARDEN TRACTOR. Refer to Determine Your Model of Rider on page 3 of this manual to determine what model rider you are attempting to install this attachment to.

1.Remove the flange nut, washer and shoulder spacer which secures the double-idler bracket to the undercarriage. See Figure 5.

2.Remove the 3-inch hex bolt from the bottom of the front pulley, to free it from the undercarriage.

3.Reassemble with the 3-inch hex bolt on top of the undercarriage and the flange nut securing the pulley from the bottom. See Figure 6.

IMPORTANT: Components must be reassembled in the exact order illustrated in Figure 6.

Mounting the Belt Keeper

(Manual PTO Garden Tractors equipped

with a 46-inch deck ONLY)

The belt keeper and hardware (packaged separately, refer to page 6-7) must be installed around the engine pulley of all Manual PTO Garden Tractors with a 46-inch cutting deck. To do so, proceed as follows:

1.Locate the engine pulley by looking beneath the front area of your tractor.

2.Secure the belt keeper to the inside of the tractor’s frame with the hex nut, bell washer and jam nut as shown in Figure 7.

3.Make certain the cupped portion of the bell washer is facing IN before tightening the jam nut.

4

Assembly

Model Series

600-649 &

All 800 series.

WARNING

Before installing attachment, place tractor on a firm and level surface. Place the PTO in

the disengaged

(OFF) position, set the parking brake, shut engine off and remove key to prevent unintended starting.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents OPERATOR’S Manual Customer Support Finding and Recording Model NumberDetermine The Model Your Rider FastAttach Snow Thrower Attachment To The OwnerRider Model Identification Sample Model NumberYour Responsibility Restrict the use TrainingPreparationOperation Maintenance & StorageYour Responsibility Do not modify engineCarton Contents Contents of Carton Idler Pulley and Pin MountingManual PTO Tractors equipped with Or 42-inch deck onlyReversing Idler Assembly Hardware AssemblyMounting the Belt Keeper With a 46-inch deck onlyModel Series 600-649 All 800 series Cub Cadet 11C & 13C Undercarriage Assembly all tractors42, 46, 50, 54 inch Decks With Electric PTO Upper V-belt 754-0371AModel Series 600-649 Cub Cadet 11C 38 & 42-inch Undercarriage AssemblyMounting Undercarriage Assembly Upper Drive Belt Reference ChartDeck Size Lift Arm Clevis Pin Bracket Assembly Bracket Undercarriage AssemblyModel Series 700-799 PTO Cable Belt Keeper Pin Flange Lock Nut & Washer SlottedMounting the Undercarriage Assembly PinRemove Nut Hairpin Clip Attaching the Chute Directional Control Assembling ControlsAttaching Lift Handle Attaching the ReflectorsMounting Auger Housing Attaching the Support TubesInset a Inset B All electric PTO Belt RoutingVarious Models Decks 42, 46, 50Routing the Lower Drive Belt All Tractors Models Routing the Upper Drive Belt Older Style TractorsLeft Side Undercarriage Spindle Pulley Double-Idler Bracket Right SideEngaging the Augers Impeller Chute Directional ControlQuickly Tire Chain Kit Number OperationMaking Adjustments AdjustmentsLift Adjustment Lower Chute Crank Support Bracket AdjustmentMaintenance MaintenanceBefore lubricating Repairing, or Lubrication Chute Directional ControlPage Snow Thrower 40 B Snow Thrower Attachment 12 8 Belt Guard Page Page MANUFACTURER’S Limited Warranty for
Top Page Image Contents