Yazoo/Kees ZMKW48172, ZMKW52212, ZMKH61252, ZMKW48192, ZMKH52252 manual Operating on hills

Page 34

operation

Operating on hills

Read the Safety Instructions “Driving on Slopes” in the “Safety Instructions”.

WARNING!

Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes.

• The slowest speed possible should be used

 

before starting up or down hills.

 

• Avoid stopping or changing speed on hills.

 

• If stopping is absolutely necessary, pull drive

 

levers into the neutral position and push to

 

the outside of the unit and engage the parking

 

brake.

 

• To restart movement, release the parking

 

brake.

 

• Pull the control levers back to the center of the

 

mower and press forward to regain forward

 

motion.

8011-640

• Make all turns slowly.

Stopping conditions

 

English-34

Image 34
Contents Operator Manual Page Contents Page Driving and Transport on Public Roads CongratulationsGeneral TowingGood Service Manufacturing NumberSymbols and decals Important InformationRemove key before Safety General OperationNever take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Never make adjustments with the engine Transport Roll over Protection system Rops Customer responsibilitiesSetup Setup and adjustmentsRops Assembly Components Control Arms Seat InstallTires Engine OilMower Deck Leveling Cutting HeightThrottle Lever Tension Park Brake Adjustment Motion Control Linkage AdjustmentKeep hands, feet and clothing away from rotating tires Controls Motion Control Levers Tracking Bypass LinkagesRefueling Fuel Shut Off ValveHour Meter Ignition SwitchChoke Control Throttle Control Blade SwitchParking Brake Mower Deck Cut Height Lift Lever Always use the high position to transportTraining OperationSteering Before Starting Starting the EngineEnsure that no one is near mower when engaging blade switch To attach jumper cables Weak batteryTo remove cables, reverse order Running Operating on hills Mowing Tips Stopping the Engine Moving Manually Hardware MaintenanceSafety System Air filterMower blades Blade replacementHydraulic system Checking the BladesChecking the Deck belt Cutter HousingsChecking the Parking Brake Checking the pump beltTire pressure LubricationReplacing the Fuel Filter Leveling Adjusting the Mower DeckCutting height adjustments Anti-scalp rollersCleaning and Washing Caster WheelsDriver’s Seat Hydraulic System, Oil LevelHydraulic System-Changing Oil and Filters Shaft Bushings and Linkage Lubricating the CablesThrottle and Choke Cables, Lever Bearings Front Wheel MountDeck belt pulleys Mower Deck Height AdjusterSteering Control Shafts Mower Deck Struts Trouble shooting Problem CauseEnglish-49 Storage Winter StorageUSA requirements CONForMITY CertificatesConformity Certificates CE requirementsZMKW52212 ZMKH52252 Engine TECHNICAL DataTransmission ZMKW52212 ZMKH52252 Overall DimensionsProductivity ZMKH61252 ZMKW48172 Engine 5W30 API SF-SJ SAE 30, SAE 40 API SF-SJZMKH61252 ZMKW48172 ZMKW48192 Engine ZMKW48192 Accessories Torque SpecificationsDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-62 English-63 English-64 At Least Once Each Year English-66 Page 539 131257 R02 03/18/08