LUBRICATION
General
Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it must be filled with engine oil.
When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease.
For daily use, the machine should be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced.
Gasoline or other petroleum products must not be used to clean belts.
Hydraulic System, Oil Level
The hydraulic oil and filter should be replaced every 300 hours, and at least once a year. Contact an authorized service workshop.
Check the oil level in the hydraulic tank daily. The level should be about
Hydraulic System-Changing Oil and Filters
Oil and filter changes should be carried out by an authorized service workshop due to the risk of impurities entering the system.
Driver’s Seat
Tip the seat forward. Lubricate the hinges at the front of the seat using an oil can. Lubricate the seat slide adjustment and lever mechanism with the oil can.
Engine Oil
The engine oil must be changed for the first time after
8 hours of operation. Thereafter, it should be changed every 100 hours. See the engine manufacturer’s manual for specifications on oil type, filling instructions.
Checking the hydraulic oil
WARNING!
If a leak is suspected, use a piece of cardboard or wood, NOT your hands, to check for leaks.
Escaping hydraulic oil under pressure can have sufficient force to penetrate the skin, causing serious injury.
If injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately.