CONTROLS
Ignition Switch
The ignition switch is placed on the driver’s control panel and is used to start and stop the engine.
IMPORTANT INFORMATION
Do not run the starter for more than five seconds each time. If the engine does not start, wait about 10 seconds before retrying.
Ignition switch and hour meter
Hour Meter
The hour meter displays the total operating time.
It will flash CHG OIL (Change Oil) at 50 hour intervals. The flash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. The hour meter cannot be manually reset.
Choke Control
The choke mode is used for cold starts in order to provide the engine with a richer fuel mixture.
For cold starts, the control should be pulled out to its extent.
Hour meter
Choke control