Yazoo/Kees ZMKH61252, ZMKW52212, ZMKW48192 Lubrication, Tire pressure, Replacing the Fuel Filter

Page 41

Maintenance

Lubrication

See service decal under foot plate for service points and maintenance intervals. Clean grease zerks thoroughly before greasing. See engine manual for engine service.

Tire pressure

Check every 25 hours. All four tires require 15 psi / 103 kPa / 1 bar.

Tire pressures

Replacing the Fuel Filter

Replace the line-mounted fuel filter every 100 hours (once per season) or more often if it becomes clogged.

To replace the filter:

1.Move the hose clamps away from the filter. Use flat-nosed pliers.

2.Pull the filter loose from the hose ends.

3.Push the new filter into the hose ends. Position the filter with the “FLOW” arrow pointing up toward the fuel pump. If necessary, a soap solution can be applied to the filter ends to ease mounting.

4.Move the hose clamps back toward the filter.

Fuel filter

8011-564

8011-468

English-41

Image 41
Contents Operator Manual Page Contents Page General CongratulationsDriving and Transport on Public Roads TowingManufacturing Number Good ServiceImportant Information Symbols and decalsRemove key before General Operation SafetyNever take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Never make adjustments with the engine Transport Customer responsibilities Roll over Protection system RopsRops Assembly Components Setup and adjustmentsSetup Tires Seat InstallControl Arms Engine OilThrottle Lever Tension Cutting HeightMower Deck Leveling Keep hands, feet and clothing away from rotating tires Motion Control Linkage AdjustmentPark Brake Adjustment Controls Motion Control Levers Bypass Linkages TrackingFuel Shut Off Valve RefuelingChoke Control Ignition SwitchHour Meter Parking Brake Blade SwitchThrottle Control Always use the high position to transport Mower Deck Cut Height Lift LeverSteering OperationTraining Starting the Engine Before StartingEnsure that no one is near mower when engaging blade switch To remove cables, reverse order Weak batteryTo attach jumper cables Running Operating on hills Mowing Tips Stopping the Engine Moving Manually Safety System MaintenanceHardware Air filterHydraulic system Blade replacementMower blades Checking the BladesChecking the Parking Brake Cutter HousingsChecking the Deck belt Checking the pump beltReplacing the Fuel Filter LubricationTire pressure Cutting height adjustments Adjusting the Mower DeckLeveling Anti-scalp rollersCaster Wheels Cleaning and WashingHydraulic System-Changing Oil and Filters Hydraulic System, Oil LevelDriver’s Seat Throttle and Choke Cables, Lever Bearings Lubricating the CablesShaft Bushings and Linkage Front Wheel MountSteering Control Shafts Mower Deck Height AdjusterDeck belt pulleys Mower Deck Struts Problem Cause Trouble shootingEnglish-49 Winter Storage StorageConformity Certificates CONForMITY CertificatesUSA requirements CE requirementsTransmission TECHNICAL DataZMKW52212 ZMKH52252 Engine Productivity Overall DimensionsZMKW52212 ZMKH52252 5W30 API SF-SJ SAE 30, SAE 40 API SF-SJ ZMKH61252 ZMKW48172 EngineZMKH61252 ZMKW48172 ZMKW48192 Engine ZMKW48192 Torque Specifications AccessoriesAction Date, mtr reading, stamp, sign Delivery ServiceAfter the First 5-8 Hours Hour Service English-62 English-63 English-64 At Least Once Each Year English-66 Page 539 131257 R02 03/18/08