3M 2273ME-iD, 2250ME-iD manual Filtering Power Frequency Interference, Selecting Locating Audio

Page 14

Press the left/right arrows [SK] to move the square cursor to a digit. Press Select [SK] to enter the number in the frequency field.

Press OK [5] to save the programmed frequency, or press Exit [SK] to cancel. The frequency will appear in the locate frequency screen as U ###.

Note: To redefine a previously programmed user frequency, highlight the frequency, press enabl/ disabl, select the back arrow with the cursor, and press select to delete the previous entry.

Filtering Power Frequency Interference

MENU [6] + More>>[SK] + Setup [SK] + + More» [SK] + More>>[SK] + Filter [SK]

In order to filter out unwanted power influences while locating with user-defined frequencies, verify the correct frequency is selected for your location (default 50 Hz).

Selecting Locating Audio

MENU [6] + More>>[SK] + Setup [SK] + + More» [SK] + More>>{SK} + Audio Config [SK]

The user can choose the audio response of the receiver when using the Directional Peak mode for path locating. Highlight the audio selection and press OK to save.

14	78-8130-6151-8-E

Image 14

Contents 3M Dynatel Contents 78-8130-6151-8-E Intended Use Safety InformationAbout This Manual Transmitter Battery Installation Quick StartAA Alkaline Batteries Twist cap to open battery compartment Receiver Battery InstallationCleaning Service and Accessories Transmitter Keypad and Connector DefinitionsRechargeable Battery Maximum Transmitter OutputReceiver Key Pad Definitions Menu Screens Main Menu78-8130-6151-8-E Select Depth Units Configuring The ReceiverSetting the Receiver Clock Selecting a LanguageEnabling/Disabling Frequencies Menu 6 + MoreSK + Setup SK + + More» SK + Locate Freq SKMenu 6 + MoreSK + Setup SK + + More» SK + Tone Freq SK Selecting External Jack Frequencies Tone FrequenciesFiltering Power Frequency Interference Selecting Locating AudioDirect Connect Method Buried Cables And PipesTransmitter Connections Dyna-Coupler Method Induction Method Receiver Modes Mode + Directional Peak DirPk SK ToggleMode + DirNull SK Toggle Directional PeakSpecial Peak Mode + Spl Pk SK ToggleMode + IndPk SK Toggle Inductive Peak IndPkExpanded Mode Depth and Current EstimateActive PowerFrequencies Auxiliary Locating in Directional Peak ModePassive 78-8130-6151-8-E 78-8130-6151-8-E Locating Active Duct Probes Sondes Determining ADP DepthPinpointing the Buried Fault Buried Sheath Faults Earth/Return FaultsTransmitter Setup Green Band Model Initial Configuration 3M Electronic Markers 3M EMS iD MarkersLocating 3M EMS Markers Alert Mode 3M Dynatel Models 2250ME-iD and 2273ME-iD onlyMenu 6 + Setup SK + Marker Type SK Enabling/Disabling Marker TypesSingle Marker Locate Dual Marker LocateMarker Depth Estimate ID Marker DepthDepth of Passive, Non-iD Marker Creating New Templates Menu 6 + Data/Templat SK + User Templat SK78-8130-6151-8-E Editing Templates Menu 6 + Write Mode SK Writing iD MarkersModifying Marker Data to be Programmed Reading iD Markers Serial Number and Software Version GPS OperationActivation Key Inputting the GPS Activation KeyCommunicating with the GPS unit Capturing the GPS Coordinates Capture Mode / ModeMenu SK + Setup SK + More SK + More SK + Com SK Toggle Path Mapping with GPS Create Trace TemplatesMenu6 + Com SK + GIS SK or PDA SK Select Com Port SettingSending Path Information to GPS Device Write History SK Reviewing Marker HistoryRead History Menu 6 + Data/Templat SK + Read History SKOther Applications Aerial Faults ToningConnection Diagrams Cable Identification 3M Dynatel PC Tool Kit Help ModeReceiver Setup Menu 6 + More SK + Help SKProduct Description Product Description And Optional AccessoriesSelf Test Of Receiver Menu 6 + More SK + Self Test SKPackage Contents Optional 3M Dynatel AccessoriesReceiver Specifications SpecificationNear-Surface 60 cm 24 Ball Marker M 40 in Pwr, WtrMax w/external DC source Transmitter SpecificationsExternal DC source 40%Track and Trace Solutions