3M 2273ME-iD, 2250ME-iD manual Editing Templates

Page 35

17.Navigate to the next field by pressing the left/ right arrow [SK].

18.Press Modify [SK] to populate the highlighted field.

Editing Templates

The operator can select an existing template and make changes to it in the same manner describe in Creating Templates. The following save screen will appear.

Over Write: Saves all modifications that have been made to the original template.

Rename: Overwrites the old template with the new name and all modifications. Screen will return to the template name field. Modify the name of the template and press OK [5] to save.

Save New: Creates a new template containing all information. Original template remains unchanged. Screen will return to the template name field. Modify the name of the template and press OK [5] to save.

Cancel: Clears all modifications made to any unsaved template.

Note: User templates can also be created on a PC using 3M™ Dynatel™ PC Tool Kit software and then downloaded to the receiver via the RS232 port [14] on the unit and the provided RS232 cable or RS232-to-USB adapter cable.

78-8130-6151-8-E

35

Image 35

Contents 3M Dynatel Contents 78-8130-6151-8-E Intended Use Safety InformationAbout This Manual Quick Start Transmitter Battery InstallationAA Alkaline Batteries Twist cap to open battery compartment Receiver Battery InstallationCleaning Transmitter Keypad and Connector Definitions Service and AccessoriesMaximum Transmitter Output Rechargeable BatteryReceiver Key Pad Definitions Main Menu Menu Screens78-8130-6151-8-E Selecting a Language Configuring The ReceiverSetting the Receiver Clock Select Depth UnitsSelecting External Jack Frequencies Tone Frequencies Menu 6 + MoreSK + Setup SK + + More» SK + Locate Freq SKMenu 6 + MoreSK + Setup SK + + More» SK + Tone Freq SK Enabling/Disabling FrequenciesSelecting Locating Audio Filtering Power Frequency InterferenceDirect Connect Method Buried Cables And PipesTransmitter Connections Dyna-Coupler Method Induction Method Directional Peak Mode + Directional Peak DirPk SK ToggleMode + DirNull SK Toggle Receiver ModesInductive Peak IndPk Mode + Spl Pk SK ToggleMode + IndPk SK Toggle Special PeakDepth and Current Estimate Expanded ModeActive PowerFrequencies Auxiliary Locating in Directional Peak ModePassive 78-8130-6151-8-E 78-8130-6151-8-E Determining ADP Depth Locating Active Duct Probes SondesPinpointing the Buried Fault Buried Sheath Faults Earth/Return FaultsTransmitter Setup Green Band 3M Electronic Markers 3M EMS iD Markers Model Initial ConfigurationEnabling/Disabling Marker Types Alert Mode 3M Dynatel Models 2250ME-iD and 2273ME-iD onlyMenu 6 + Setup SK + Marker Type SK Locating 3M EMS MarkersDual Marker Locate Single Marker LocateID Marker Depth Marker Depth EstimateDepth of Passive, Non-iD Marker Menu 6 + Data/Templat SK + User Templat SK Creating New Templates78-8130-6151-8-E Editing Templates Writing iD Markers Menu 6 + Write Mode SKModifying Marker Data to be Programmed Reading iD Markers Inputting the GPS Activation Key GPS OperationActivation Key Serial Number and Software VersionCommunicating with the GPS unit Capturing the GPS Coordinates Capture Mode / ModeMenu SK + Setup SK + More SK + More SK + Com SK Toggle Create Trace Templates Path Mapping with GPSMenu6 + Com SK + GIS SK or PDA SK Select Com Port SettingSending Path Information to GPS Device Menu 6 + Data/Templat SK + Read History SK Reviewing Marker HistoryRead History Write History SKOther Applications Aerial Faults ToningConnection Diagrams Cable Identification Menu 6 + More SK + Help SK Help ModeReceiver Setup 3M Dynatel PC Tool KitMenu 6 + More SK + Self Test SK Product Description And Optional AccessoriesSelf Test Of Receiver Product DescriptionOptional 3M Dynatel Accessories Package ContentsSpecification Receiver SpecificationsM 40 in Pwr, Wtr Near-Surface 60 cm 24 Ball Marker40% Transmitter SpecificationsExternal DC source Max w/external DC sourceTrack and Trace Solutions