5.Press Modify [SK]. The percentage displayed in the upper right portion of the screen indicates the remaining memory available on the marker.
6.The operator may select User Edit in order to ‘type’ the modification, or Delete Row to remove the entire row from the template, or select Show All to display a list of common terms.
Note: Using a common term requires less memory in the marker.
7.Select an option from the list by pressing the up/ down arrows [SK]. Press OK [5].
8.If User Edit is selected, the following screen will appear.
9.Move the boxed cursor to the ‘back arrow’ and press Select [SK] to delete the entry to be modified.
10.Move the boxed cursor by pressing the left/right arrows [SK] or the Up/ Down Arrow [SK] to move the cursor to the next row.
11.Press Select [SK] to enter the alphanumeric character.
−−Entry will appear at the top of the screen.
12.Press OK [5] when entry is complete.
13.If Show All is selected, the following screen will appear.
14.Select a common term from the list by pressing the up/down arrows [SK].
15.Press OK [5]. The modification will automatically populate the marker template.
Reading iD Markers
The operator can retrieve the data from the iD marker by pressing Read [SK] (on the locate screen or the depth screen).
The receiver tip should be lowered to the ground to reach maximum read depth.
If more than one 3M™ EMS iD Marker of the same utility is detected, the receiver will read the first marker and display the data from the marker.
38 |
|