Northern Industrial Tools M1107C owner manual Towing, Read, Attach safety chains

Page 11

Moving and Towing to Job Site

Towing:

1.

Read

Review towing safety instructions in your vehicle manual.

 

instructions

 

2.

Check tires

Make sure tires are fully inflated and in good repair.

 

 

WARNING:

Do not over-inflate tires. Serious injury can occur if tire explodes.

When seating a bead after repair, do not exceed 30 PSI. Pressures higher than 30 PSI can cause the tire and wheel to rupture and explode.

3. Attach to hitch

Attach log splitter to vehicle hitch

(2” ball)

1)

Attach log splitter’s coupler to a class 2 or higher hitch with 2” ball (only).

 

2)

Adjust coupler to ball by raising locking lever and turning lock nut with fingers.

 

3)

Proper adjustment is obtained when coupler is as tight as possible on ball and

 

 

locking lever can still be opened and closed.

 

4)

Lock lever closed to secure the attachment. An optional locking pin or

 

 

padlock may be inserted in the locking lever hole for extra security.

4.Attach safety chains

Attach safety chains.

1.Two safety chains must be used while towing.

2.Cross safety chains under the coupler allowing only enough slack for vehicle turns.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents M1107C Hazard Signal Word Definitions Table of Contents About Your Log Splitter About Your Log SplitterThis equipment to others Safety Label Locations Safety Label Locations Ref Description Machine Component IdentificationDescription Initial Unpacking & Set-Up Rail Beam Replace fill capFuel valve off Moving and Towing to Job SiteMoving the log splitter PlaceAttach to hitch Attach log splitter to vehicle hitch Ball Attach safety chainsTowing ReadMoving and Towing to Job Site Hydraulic system Check the hydraulic system carefully Before Each Use-Inspection / MaintenanceStep One Inspect and maintain log splitter before each use Fuel tank / lines Check fuel tank and fuel lines for leaksTires Step Two Fueling Before Each Use FuelingCombustibles or Before Each Use Work Site Selection & Set-UpStep Three Work site selection and log splitter set-up Select locationLock both legs Splitting Operation General safety informationHorizontal lock VerticalStart engine Start the engine Vertical SplittingCorrect Log Orientation Stop wedge Extend wedgeInstructions below to remove the log Stuck LOGReturn to horizontal position Storage Periodic Maintenance Cause Solution TroubleshootingAny Questions, Comments, Problems or Parts Orders ProblemSpecifications Parts Breakdown-Exploded View 1107 REV C PART# Description QTY Summary of Important Safety Information for Operation Personal protective equipment Safety During TowingSafety Before Use Read/instruct Safety During Inspection/MaintenanceSafety in Work Site Selection Safety During FuelingSafety in Loading, Operating, and Unloading Safety During Use General Safety During Use Loading/Unloading Safety After useSummary of Important Safety Information for Operation

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.
Top Page Image Contents