Northern Industrial Tools M1107C owner manual Initial Unpacking & Set-Up

Page 8

Initial Unpacking & Set-Up

IMPORTANT!

Engine is shipped without oil. DO NOT start the engine before adding oil.

Step One:

Add oil to the engine. Using a funnel. Add SAE 30 oil up to the FULL mark on

Add oil

the dipstick. (See engine Owner’s Manual for oil capacity and location of fill

 

cap.)

Step Two:

Secure Split Control Lever to Control Valve. Use following procedures :

Secure Split Control

1.

Split Control Lever is shipped taped to the hydraulic cylinder. Untape to

Lever

 

release.

 

2.

Raise lever to align lever hole with holes in valve bracket and insert clevis

 

 

pin through the holes to put lever in the up position.

 

3.

Secure by inserting cotter pin in end of clevis pin and spreading ends apart.

Cotter Pin

Clevis pin

Step Three: Inspect

Closely inspect all log splitter components.

Log Splitter

(See Machine Components section of this manual for diagram of components.)

Components.

If you have missing components, contact Customer Service at 1-800-270-0810.

 

If you have damaged components, contact the Freight Company that delivered the

 

 

unit and file a claim.

 

 

Step Four:

NOTE: Hydraulic reservoir is shipped with oil.

Verify Hydraulic

1.

Check hydraulic oil level:

 

a) Make sure engine is off and the cylinder is fully retracted.

Oil Level.

 

 

b) Relieve all hydraulic system pressure by moving Split Control Lever back and

 

 

 

 

forth several times.

 

 

c) Remove Hydraulic oil fill cap. Verify that oil level is 1” from top of hydraulic

 

 

reservoir (not including fill neck).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents M1107C Hazard Signal Word Definitions Table of Contents About Your Log Splitter About Your Log SplitterThis equipment to others Safety Label Locations Safety Label Locations Ref Description Machine Component IdentificationDescription Initial Unpacking & Set-Up Replace fill cap Rail BeamMoving and Towing to Job Site Moving the log splitterPlace Fuel valve offAttach safety chains TowingRead Attach to hitch Attach log splitter to vehicle hitch BallMoving and Towing to Job Site Before Each Use-Inspection / Maintenance Step One Inspect and maintain log splitter before each useFuel tank / lines Check fuel tank and fuel lines for leaks Hydraulic system Check the hydraulic system carefullyTires Before Each Use Fueling Step Two FuelingBefore Each Use Work Site Selection & Set-Up Step Three Work site selection and log splitter set-upSelect location Combustibles orLock both legs General safety information Splitting OperationVertical Horizontal lockVertical Splitting Start engine Start the engineCorrect Log Orientation Extend wedge Stop wedgeStuck LOG Instructions below to remove the logReturn to horizontal position Storage Periodic Maintenance Troubleshooting Any Questions, Comments, Problems or Parts OrdersProblem Cause SolutionSpecifications Parts Breakdown-Exploded View 1107 REV C PART# Description QTY Summary of Important Safety Information for Operation Safety During Towing Safety Before Use Read/instructSafety During Inspection/Maintenance Personal protective equipmentSafety During Fueling Safety in Work Site SelectionSafety During Use General Safety During Use Safety in Loading, Operating, and UnloadingSafety After use  Loading/UnloadingSummary of Important Safety Information for Operation

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.
Top Page Image Contents