Northern Industrial Tools M1107C owner manual Stuck LOG, Instructions below to remove the log

Page 23

Splitting Operation

8. Important

If a log does not split completely and becomes stuck on the wedge, follow the

STUCK LOG

instructions below to remove the log.

procedure

A log can become stuck to the wedge if the wedge becomes embedded in the log and the

 

log doesn’t split and separate. This can happen if the log is too stringy or tough to split

 

completely.

 

A stuck log will move back with the wedge on the initial attempt to retract the wedge. If

 

this happens, STOP retracting the wedge immediately and follow the directions below.

WARNING: NEVER attempt to remove a stuck log by:

•Using the hydraulic force of the splitter.

•Modifying the splitter.

•Adding attachments to the splitter.

Personal injury could result from log or metal pieces flying out at high speed toward the operator or bystanders, or the splitter could become damaged.

1.If there is already 1” or more of clearance between the log and endplate, go to step 2. Otherwise, retract wedge just enough to remove pressure between the log and endplate – about 1” clearance. (Move split control to return, allow wedge to move about 1”, then stop the wedge by moving the split control to neutral “N”.)

2.Turn engine OFF.

3.Remove stuck log from the wedge manually with a pry bar or a sledgehammer.

Important: Be extremely careful as log pieces may fly off as they separate from the wedge. Make sure bystanders are clear and wear safety goggles.

4.Do not attempt to resplit a stuck log once it has been removed from the wedge. Manually split with an axe or cut with a chainsaw.

9. Return wedge Move Split Control Lever away from end plate to return wedge.

Once the control valve is actuated in the return direction, the wedge is designed to keep returning by itself completely and then stop automatically.

SPLIT CONTROL LEVER OPERATION

 

N

 

Split Log

Neutral

Return

WARNING:

Stay clear while the wedge is returning. It is still powerful enough on the return stroke to cause serious injury.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents M1107C Hazard Signal Word Definitions Table of Contents About Your Log Splitter About Your Log SplitterThis equipment to others Safety Label Locations Safety Label Locations Ref Description Machine Component IdentificationDescription Initial Unpacking & Set-Up Rail Beam Replace fill capFuel valve off Moving and Towing to Job SiteMoving the log splitter PlaceAttach to hitch Attach log splitter to vehicle hitch Ball Attach safety chainsTowing ReadMoving and Towing to Job Site Hydraulic system Check the hydraulic system carefully Before Each Use-Inspection / MaintenanceStep One Inspect and maintain log splitter before each use Fuel tank / lines Check fuel tank and fuel lines for leaksTires Step Two Fueling Before Each Use FuelingCombustibles or Before Each Use Work Site Selection & Set-UpStep Three Work site selection and log splitter set-up Select locationLock both legs Splitting Operation General safety informationHorizontal lock VerticalStart engine Start the engine Vertical SplittingCorrect Log Orientation Stop wedge Extend wedgeInstructions below to remove the log Stuck LOGReturn to horizontal position Storage Periodic Maintenance Cause Solution TroubleshootingAny Questions, Comments, Problems or Parts Orders ProblemSpecifications Parts Breakdown-Exploded View 1107 REV C PART# Description QTY Summary of Important Safety Information for Operation Personal protective equipment Safety During TowingSafety Before Use Read/instruct Safety During Inspection/MaintenanceSafety in Work Site Selection Safety During FuelingSafety in Loading, Operating, and Unloading Safety During Use General Safety During Use Loading/Unloading Safety After useSummary of Important Safety Information for Operation

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.
Top Page Image Contents