Northern Industrial Tools M1107C Summary of Important Safety Information for Operation

Page 31

Summary of Important Safety Information for Operation

WARNING

Carefully read and make sure you understand the following safety information before using the log splitter.

Improper use or maintenance of the log splitter can result in serious injury to the operator or bystanders from moving parts that can crush or cut, flying objects, burns, fire or explosion, escaping high pressure hydraulic fluid, or carbon monoxide poisoning.

Introduction

●Read Manual. Read this operator’s manual and the engine Owner’s Manual completely before attempting to use the log splitter. Serious injury or death can result if safety instructions are not followed.

●Instruct operators. The log splitter owner should instruct all operators in safe log splitter operation.

●Intended use. Log splitters should only be used for splitting wood logs, lengthwise with the grain. Do not use for other purposes, as unforeseen hazards may result.

Prohibition Against Modifications

Never modify or alter the log splitter in any way. Modifications can create serious safety hazards and will void the warranty.

●Attachments. Never add attachments to the splitter, except for authorized accessories supplied by the manufacturer with instructions for safe installation and use.

●Engine Speed. The maximum engine speed is preset at a safe limit. Never attempt to modify the engine speed setting to run at a higher speed.

●Fuel/Exhaust system. NEVER modify or add to the exhaust system, fuel tanks, or fuel lines. Fire can result.

●Remote Control. NEVER attach a rope, cable, or other remote device to the splitting control.

●Splitting Wedge. NEVER attempt to change the height or speed of the splitting wedge.

●Pressure Setting. NEVER increase the pressure setting of the pump or control valve.

Operator Restrictions

●Untrained Operators. Do not allow anyone to operate the log splitter who has not read the owner’s manual or been instructed on the safe use of the splitter.

●Minimum Operator Age. Never allow anyone under age 16 to operate the log splitter. Children 16 years of age and older must be trained and supervised by a trained adult.

Safety in Moving and Towing the Log Splitter

WARNING

The log splitter is very heavy. It can cause serious injury if it rolls out of control or tips over.

Follow the safety instructions below for safely moving the log splitter.

General safety while Moving

●Horizontal position. Make sure the log splitter is secured in the horizontal position before moving the log splitter. DO NOT move the log splitter when it is in the vertical position because it will be unstable and could tip.

●Hills. Do not move the log splitter up or down hills by hand – use a towing vehicle.

●Engine off. Never move the log splitter with its engine running.

●No riding. Never allow anyone to sit or ride on the log splitter.

●No cargo. Never transport cargo or wood on the log splitter.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents M1107C Hazard Signal Word Definitions Table of Contents This equipment to others About Your Log SplitterAbout Your Log Splitter Safety Label Locations Safety Label Locations Description Machine Component IdentificationRef Description Initial Unpacking & Set-Up Rail Beam Replace fill capFuel valve off Moving and Towing to Job SiteMoving the log splitter PlaceAttach to hitch Attach log splitter to vehicle hitch Ball Attach safety chainsTowing ReadMoving and Towing to Job Site Hydraulic system Check the hydraulic system carefully Before Each Use-Inspection / MaintenanceStep One Inspect and maintain log splitter before each use Fuel tank / lines Check fuel tank and fuel lines for leaksTires Step Two Fueling Before Each Use FuelingCombustibles or Before Each Use Work Site Selection & Set-UpStep Three Work site selection and log splitter set-up Select locationLock both legs Splitting Operation General safety informationHorizontal lock VerticalStart engine Start the engine Vertical SplittingCorrect Log Orientation Stop wedge Extend wedgeInstructions below to remove the log Stuck LOGReturn to horizontal position Storage Periodic Maintenance Cause Solution TroubleshootingAny Questions, Comments, Problems or Parts Orders ProblemSpecifications Parts Breakdown-Exploded View 1107 REV C PART# Description QTY Summary of Important Safety Information for Operation Personal protective equipment Safety During TowingSafety Before Use Read/instruct Safety During Inspection/MaintenanceSafety in Work Site Selection Safety During FuelingSafety in Loading, Operating, and Unloading Safety During Use General Safety During Use Loading/Unloading Safety After useSummary of Important Safety Information for Operation

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.
Top Page Image Contents