BRAKE PEDAL 
| FORWARD/ |
| REVERSE |
| PEDAL |
| Forward |
PARKING | Heel/Toe |
BRAKE | Operation |
LEVER |
|
| Reverse |
Figure 15
WARNING: The forward/reverse pedal will not operate when the parking brake is engaged. Do not attempt to force the pedal when the parking brake is engaged; this could cause premature wear or damage to the drive linkage.
USING THE HI/LO RANGE SHIFT LEVER
WARNING: The tractor must be stopped before engaging or disengag- ing the transmission Hi/Lo range shift lever. Shifting while the tractor is in motion will cause damage to the transmission.
WARNING: Always maintain a tractor speed that allows for complete control and stability of the machine. Be aware of dangerous areas or conditions.
HI range — Forward speed 0 to 11.0 mph. Reverse speed 0 to 5.5 mph.
Shift the lever fully forward in the slot. See Figure 16.
Hi range is normally used for transport and can be used with some tractor attachments.
HI | N LOW |
| HI/LO RANGE | ||
|
|
|
| SHIFT LEVER | |
|
|
|
|
| |
|
|
|
|
|
|
Figure 16
LOW range — Forward speed 0 to 6.4 mph. Reverse speed 0 to 3.2 mph.
Shift the lever fully rearward in the slot.
Low range is recommended for use with most PTO driven tractor attachments. Low range must be used when climbing or descending slopes.
NEUTRAL — Disengages the transmission drive. Shift the lever to the center of the slot.
Use ONLY for towing or moving the tractor when not under power.
USING THE DIFFERENTIAL LOCK PEDAL
Depressing the differential lock pedal engages a mechanism in the transmission that locks the differential. This prevents the rear wheels from rotating independently of each other and provides constant power to both rear wheels when additional traction is needed.
IMPORTANT: Do not engage the differential lock when one of the rear wheels is rotating. Stop the wheel rotation and then engage the differential lock.
WARNING: When operating with the dif- ferential lock engaged, the tractor will be difficult to steer. Do not drive the tractor on roadways or at high speeds with the differential lock engaged.
•Fully depress and hold the differential lock pedal to engage the transmission differential lock. Release the pedal to disengage the differential lock. See Figure 17.
DIFFERENTIAL LOCK PEDAL (Depress and Hold to Engage)
Figure 17
NOTE: Because of the drive load on the internal engagement mechanism, releasing the differential lock pedal may not always disengage the differential lock. It may be necessary to slow the tractor, or reverse the direction of travel, to disengage the differential lock.
19