Adjusting Front Wheel TOE-IN

•The length of the upper hitch link is normally determined by the design of each implement. To adjust the upper hitch link, loosen the lock- ing lever and turn the adjustment tube as shown in Figure 28. After the appropriate length is attained, tighten the locking lever. If correctly adjusted, the upper hitch link will be parallel or nearly parallel to the lower hitch links.

•Distance ‘A’ should be 0"-.20" less than distance ‘B’ if the toe-in is correct. If it is not, readjust the toe-in.

ADJUSTMENT TUBE

Lengthen

Shorten

LOCKING

LEVER

Figure 28

•The length of the hitch chains, attached to each lower hitch link, limit the side-to-side move- ment of the lower links. Loosen the jam nut and turn the chain’s hex shaft as shown in Figure 29 to adjust the length of the hitch chain. Tighten the jam nut after adjusting.

Turn Hex Shaft
to Lengthen
Loosen
Jam Nut	Turn Hex Shaft
	to Shorten

HEX SHAFT

HEX JAM NUT

Figure 29

ADJUSTING FRONT WHEEL TOE-IN

The front wheel toe-in is set at the factory and should maintain the proper setting. However, the toe-in should be checked periodically and readjusted if necessary.

CHECK THE TOE-IN AS FOLLOWS:

•Place the tractor on a level surface with the wheels in the straight ahead position.

•Place an easily visible mark on the center lines of both front tires at the horizontal center line of the wheel.

•Measure and record the distance ‘A’ between the two marks. See Figure 30.

•Roll the tractor forward or rearward until the marks are at the horizontal center line at the rear of the wheels. Measure and record the distance ‘B’ between the marks. See Figure 30.

Figure 30

READJUST THE TOE-IN AS FOLLOWS:

NOTE: The right ball joint and jam nut are left hand threaded.

•Loosen the jam nuts at both the LH and RH ball joints. See Figure 31.

•Using a pair of pliers (or similar tool) to grasp the tie rod, turn the rod as follows:

Forward to shorten the tie rod and decrease the toe-in. See Figure 31.

Rearward to lengthen the tie rod and increase the toe-in. See Figure 31.

Front of

Shorten Rod —

Tractor

Decrease Toe-in

Lengthen Rod —

Increase Toe-in

TIE ROD

JAM NUT

RH BALL JOINT

Figure 31

•Readjust the tie rod as necessary to obtain the correct toe-in, then tighten the jam nuts against the ball joints.

7304 specifications

The MTD 7304 is a powerful and efficient lawn mower that is designed for both residential and commercial use. Known for its reliability and performance, the MTD 7304 has become a popular choice among homeowners and landscape professionals alike. This mower is equipped with a range of features and technologies that enhance its functionality, making yard maintenance an easier task.

One of the standout features of the MTD 7304 is its robust engine. Powered by a durable, high-performance engine, this mower ensures consistent power delivery, making it suitable for tackling a variety of grass types and terrains. The engine is engineered for fuel efficiency, which not only helps in reducing operating costs but also minimizes environmental impact.

The cutting deck of the MTD 7304 is another highlight, typically measuring around 30 inches. This size strikes a perfect balance between maneuverability and cutting capacity, allowing users to navigate through narrow spaces while still covering significant areas in a single pass. The mower also incorporates adjustable cutting heights, providing flexibility for different grass lengths and conditions.

Equipped with advanced technology, the MTD 7304 includes an easy-to-use electric start feature. This eliminates the hassle of pull-starting, making the mower accessible to users of all ages. The mower is also designed with a user-friendly control panel, featuring intuitive controls that allow for effortless operation and adjustments while mowing.

Durability is a key characteristic of the MTD 7304, with high-quality construction materials that can withstand the rigors of regular use. The sturdy frame and components contribute to the mower's long lifespan, ensuring that it remains a reliable choice for years to come. Additionally, the mower often features a robust warranty that reflects the manufacturer's confidence in its durability.

Another notable aspect of the MTD 7304 is its ergonomic design. Comfortable handles and adjustable height options provide ease of use, reducing fatigue during extended mowing sessions. The compact design also aids in storage, allowing users to store the mower in smaller spaces without any hassle.

In summary, the MTD 7304 is a versatile mower that combines power, efficiency, and durability. With its advanced features, user-friendly technologies, and ergonomic design, it stands out as a top choice for those seeking effective lawn care solutions. Whether for a residential lawn or commercial landscaping, the MTD 7304 delivers exceptional performance, making it a valuable addition to any outdoor maintenance toolkit.