Multiquip BS46H90 Operation, Starting the Engine, Place the choke lever in the Open position

operation

NEVER lift the trowel to unnecessary heights. DO NOT stand underneath the trowel while it is being lifted. Serious damage to the machine or personal injury could be caused by dropping a trowel.

Starting the Engine

1.Place the engine fuel valve lever (Figure 20) in the "ON" position.

Figure 20. Engine Fuel Valve Lever (ON)

2.Pull the throttle lever (Figure 21) backwards and place in the "idle" position.

IDLE

THROTTLE

LEVER

3.Place the centrifugal safety "STOP" switch (Figure 22) in the "ON" position.

OFF

ON

CENTRIFUGAL

SAFETY “STOP”

SWITCH

Figure 22. Centrifugal Safety"Stop"

Switch (ON)

CAUTION

NEVER disable or disconnect the centrifugal safety "STOP" switch. It is provided for the operator's safety and injury may result if it is disabled, disconnected or improperly maintained.

4.Place the choke lever (Figure 23) in the "OPEN " position.

Figure 21. Throttle (Idle Position) Figure 23. Choke Lever Open

page 22 — BS46H SERIES WALK-BEHIND TROWEL • operation and parts manUAL — rev. #2 (10/15/13)