Multiquip gb43sc manual Globug 4-SPOT General Information

Page 14

GLOBUG 4-SPOT — GENERAL INFORMATION

The Multiquip GLOBUG 4-SPOT is a general purpose floodlight tower intended for emergency and remote lighting conditions. The GloBug can be powered by a variety of Multiquip's series generators. Power requirements for running the GloBug are 120 VAC, 60 Hz @ 18 amps.

Please read carefully the specified generator manual that will accompany your GLOBUG 4-SPOT. This manual will explain how to operate and maintain the generator.

All information related to the generator will be referenced in a

NOTEseparate (supplied) "Operation and Parts Manual". Operation andmaintenanceofthegenerator will not be referenced in this manual.

DANGER - GloBug Overhead Obstructions

ALWAYS make sure the area above GloBug is open and clear of overhead power lines

and other obstructions. The tower extends in excess of 14 ft. (4.3 meters). Contact with overhead powerlines or other obstructions could result in equipment

damage, Serious Injury or Death!

The lighting system of Multiquip's GLOBUG 4-SPOT is comprised of four "Metal Halide" 400 watt lamp with an output of 136,000 lumens.

The GloBug 4-Spot has the following features:

Stainless steel mast which prevents rust.

Mast stopper prevents sudden drop of mast.

Steering wheel for easy cart movement.

Large-sized pneumatic tires for easy travel even in rough and uneven roads.

Secure lock-type foot brake.

Tire bumper for protection.

Easy to disassemble and service parts.

Safety winch prevents reverse winding.

PAGE 14 — GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08)

Image 14

Contents Model GB43SC Lighting System Proposition 65WARNING Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Table of Contents Effective January 1st Globug 4-SPOT Safety Message Alert Symbols Foryour Safety and the Safety of OthersGlobug 4-SPOT Safety Message Alert Symbols General Safety Globug 4-SPOT Rules for Safe OperationGlobug 4-SPOT Rules for Safe Operation Lamp Safety and Care Machine Specifications Globug 4-SPOT Dimensions Globug 4-SPOT General Information Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Components Major ComponentsGlobug 4-SPOT Components Catcher Holds the outrigger in place in the stow positionLamp Assembly Globug 4-SPOT SetupGloBug Setup Raising the Lamp Stand Raising Lamp StandTurning All Lights In One Direction Adjusting Angle of the LightsAdjusting Height of the Lights Turning Lights IndividuallyShutdown Applying PowerGlobug 4-SPOT Operation Globug 4-SPOT Storage Preparation of Lighting Unit For StorageGlobug 4-SPOT Storage StorageGlobug 4-SPOT Maintenance Wiring Diagram BallastGlobug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Maintenance C10Globug 4-SPOT Maintenance Periodic Check and MaintenanceGlobug 4-SPOT -TROUBLESHOOTING Lamps Lamp TroubleshootingGlobug 4-SPOT -TROUBLESHOOTING Mast Sample Parts List Explanation of Code in Remarks ColumnGlobug 4-SPOT Spare Parts Qty DescriptionGlobug 4-SPOT Nameplate and Decals Nameplate and DecalsGlobug 4-SPOT Nameplate and Decals Part Name QTY RemarksGlobug 4-SPOT Base Plate Assy Bolt and Washer M10 X Globug 4-SPOT Electrical Assy Lamp Globug 4-SPOT Ballast Assy Screw and Washer M5 X Globug 4-SPOT Main Mast Assy Globug 4-SPOT Main Mast Assy GrommetGlobug 4-SPOT -T-HANDLE Assy Handle Grip Globug 4-SPOT Steering Assy Globug 4-SPOT Steering Assy SELF-LOCK NUT M8Globug 4-SPOT Outrigger Assy Bracket OUT,R R Globug 4-SPOT Mast Adapter Assy Part Name Globug 4-SPOT Mast Section Assy Second Mast 52 Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Heres HOW to GET Help