Multiquip gb43sc manual Globug 4-SPOT -TROUBLESHOOTING Lamps, Lamp Troubleshooting

Page 28

GLOBUG 4-SPOT —TROUBLESHOOTING (LAMPS)

Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Lamp Troubleshooting (Table 4) information shown below.

If the problem cannot be remedied, please leave the unit just as it is and consult or company's service department.

TABLE 4. LAMP TROUBLESHOOTING

	SYMPTOM	POSSIBLE PROBLEM	SOLUTION

		Are couplers not securely connected?	Connect coupler correctly.

		Is generator lamp switch turned off?	Turn on switch.

		Is lamp loose?	Screw lamp securely into socket.

		Are connectors not properly connected?	Connect disconnected contactor.

		Are any other electric appliances (other
	Lamp does not light.	than light tower) plugged into power	Unplug all other appliances.
	Lamp does not light.	source?
		source?

		Is generator voltage not normal (non-load	Repair or replace generator.
		voltage - 120 VAC)?	Repair or replace generator.
		voltage - 120 VAC)?

		Is model of lamp not compatible?	Use genuine MQ lamp.

		Is lamp not cool enough to light again?
		(Interval of 20 to 30 minutes is required	Wait for lamp to cool down.
		before turning on lamp again)

		Is generator voltage not normal (non-load	Repair or replace generator.
	Lamp only lights for a	voltage - 120 V)?	Repair or replace generator.
	Lamp only lights for a	voltage - 120 V)?
	short time.	Is ambient temperature too high (more than	Move lamp where there is proper
		Is ambient temperature too high (more than	Move lamp where there is proper
		104 °F (40 °C)?	ventilation.

PAGE 28 — GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08)

Image 28

Contents Model GB43SC Lighting System Proposition 65WARNING Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Table of Contents Effective January 1st Globug 4-SPOT Safety Message Alert Symbols Foryour Safety and the Safety of OthersGlobug 4-SPOT Safety Message Alert Symbols General Safety Globug 4-SPOT Rules for Safe OperationGlobug 4-SPOT Rules for Safe Operation Lamp Safety and Care Machine Specifications Globug 4-SPOT Dimensions Globug 4-SPOT General Information Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Components Major ComponentsGlobug 4-SPOT Components Catcher Holds the outrigger in place in the stow positionGloBug Setup Globug 4-SPOT SetupLamp Assembly Raising the Lamp Stand Raising Lamp StandAdjusting Angle of the Lights Adjusting Height of the LightsTurning All Lights In One Direction Turning Lights IndividuallyGlobug 4-SPOT Operation Applying PowerShutdown Globug 4-SPOT Storage Preparation of Lighting Unit For StorageGlobug 4-SPOT Storage StorageGlobug 4-SPOT Maintenance Wiring Diagram BallastGlobug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Maintenance C10Globug 4-SPOT Maintenance Periodic Check and MaintenanceGlobug 4-SPOT -TROUBLESHOOTING Lamps Lamp TroubleshootingGlobug 4-SPOT -TROUBLESHOOTING Mast Sample Parts List Explanation of Code in Remarks ColumnGlobug 4-SPOT Spare Parts Qty DescriptionGlobug 4-SPOT Nameplate and Decals Nameplate and DecalsGlobug 4-SPOT Nameplate and Decals Part Name QTY RemarksGlobug 4-SPOT Base Plate Assy Bolt and Washer M10 X Globug 4-SPOT Electrical Assy Lamp Globug 4-SPOT Ballast Assy Screw and Washer M5 X Globug 4-SPOT Main Mast Assy Globug 4-SPOT Main Mast Assy GrommetGlobug 4-SPOT -T-HANDLE Assy Handle Grip Globug 4-SPOT Steering Assy Globug 4-SPOT Steering Assy SELF-LOCK NUT M8Globug 4-SPOT Outrigger Assy Bracket OUT,R R Globug 4-SPOT Mast Adapter Assy Part Name Globug 4-SPOT Mast Section Assy Second Mast 52 Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Heres HOW to GET Help