Multiquip gb43sc manual Globug 4-SPOT Storage

7.To unlock outriggers, push downward on the counter- weight lever indicated by arrow (Figure 25). Grab hold of outrigger, pull upward, push down and place in stow position (Figure 26.

GLOBUG 4-SPOT — STORAGE

Storage

1.Wipe dirt or foreign matter that may have accumulated on the GloBug 4-Spot during operation. Use a mild detergent to clean the unit. DO NOT spray the engine with water.

2.Avoid storing the GloBug 4-Spot in areas that can be exposed to rain, harsh elements, and high humidity.

3.Place the GloBug 4-Spot in a clean dry location away from dirt and debris.

Figure 25. Outriggers (Released)

Figure 26. Outriggers (Stow Position)

8.Press down on the top of the brake pedal (Figure 22) and hold, then release. This action will dis-engage the brake mechanism and allow the GloBug to be moved.

Figure 22. Parking Brake (Release Position)

CAUTION - READ SAFETY GUIDELINES

Before performing any maintenance procedures, be sure to READ the lamp, balloon, and general safety guidelines in this manual. Failure to read and understand these safety guidelines could cause severe equipment damage and bodily harm.

GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08) — PAGE 23