Turning All Lights In One Direction
1.Loosen the adjust lever. Turn the lighting units in the desired direction (Figure 15).
ADJUST LEVER
Figure 15. Adjusting Direction of Lighting Units
Turning Lights Individually
1.Hold the arm of the lamp and turn it to the desired direction (Figure 16.
ARM
Figure 16. Adjusting Direction of Individual Lamp
Adjusting Angle of the Lights
1.Hold the socket of the lamp and tilt it to the desired direction (Figure 17).
SOCKET
Figure 17. Adjusting Angle of Light
GLOBUG 4-SPOT — SETUP
CAUTION - MAST PINCH POINT
When raising or lowering the mast, keep hands and fingers clear of the various mast sections, this will prevent hands and fingers from getting pinched.
Adjusting Height of the Lights
1.Turn the handle of the mast winch clockwise to raise the lighting unit and turn the handle of the mast winch counterclockwise to lower the lighting unit (Figure 18).
UP
DOWN
WINCH
HANDLE
Figure 18. Adjusting Height of Light
DANGER - HIGH VOLTAGE POWER LINES
When raising mast, ALWAYS be on the lookout for overhead obstructions such as high voltage power lines.The possibility exists of electrocution, even death! if the GloBug comes in contact with high voltage power lines.
PAGE 20 — GLOBUG