Multiquip gb43sc manual Globug 4-SPOT Rules for Safe Operation, General Safety

Page 8

GLOBUG 4-SPOT — RULES FOR SAFE OPERATION

WARNING - READTHIS MANUAL

Failure to follow instructions in this manual may lead to Serious Injury or even Death. This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the GLOBUG 4-SPOT.

The following safety guidelines should always be used when operating the GLOBUG 4-SPOT:

GENERAL SAFETY

DO NOT operate or service this equipment before reading this entire manual.

This equipment should not be operated by persons under 18 years of age.

NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.

NEVER operate this equipment under the influence of drugs or alcohol.

NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing engine or mixer.

High Temperatures – Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot! components can cause serious burns.

The engine of this lighting system/generator requires an adequate free flow of cooling air. NEVER operate the generator in any enclosed or narrow area where free flow of the air is restricted. If

the air flow is restricted

it will cause serious damage to the generator engine and may cause injury to people. Remember the engine of the lighting system/generator gives off DEADLY carbon monoxide gas.

ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool. DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

Manufacturer does not assume responsibility for any accident due to equipment modifications.

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

NEVER operate the GloBug in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

Topping-off to filler port is dangerous, as it tends to spill fuel. Wipe up any spilled fuel immediately.

PAGE 8 — GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08)

Image 8
Contents Model GB43SC Lighting System Proposition 65WARNING Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Table of Contents Effective January 1st Globug 4-SPOT Safety Message Alert Symbols Foryour Safety and the Safety of OthersGlobug 4-SPOT Safety Message Alert Symbols General Safety Globug 4-SPOT Rules for Safe OperationGlobug 4-SPOT Rules for Safe Operation Lamp Safety and Care Machine Specifications Globug 4-SPOT Dimensions Globug 4-SPOT General Information Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Components Major ComponentsGlobug 4-SPOT Components Catcher Holds the outrigger in place in the stow positionLamp Assembly Globug 4-SPOT SetupGloBug Setup Raising the Lamp Stand Raising Lamp StandAdjusting Angle of the Lights Adjusting Height of the LightsTurning All Lights In One Direction Turning Lights IndividuallyShutdown Applying PowerGlobug 4-SPOT Operation Globug 4-SPOT Storage Preparation of Lighting Unit For StorageGlobug 4-SPOT Storage StorageGlobug 4-SPOT Maintenance Wiring Diagram BallastGlobug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Maintenance C10Globug 4-SPOT Maintenance Periodic Check and MaintenanceGlobug 4-SPOT -TROUBLESHOOTING Lamps Lamp TroubleshootingGlobug 4-SPOT -TROUBLESHOOTING Mast Sample Parts List Explanation of Code in Remarks ColumnGlobug 4-SPOT Spare Parts Qty DescriptionGlobug 4-SPOT Nameplate and Decals Nameplate and DecalsGlobug 4-SPOT Nameplate and Decals Part Name QTY RemarksGlobug 4-SPOT Base Plate Assy Bolt and Washer M10 X Globug 4-SPOT Electrical Assy Lamp Globug 4-SPOT Ballast Assy Screw and Washer M5 X Globug 4-SPOT Main Mast Assy Globug 4-SPOT Main Mast Assy GrommetGlobug 4-SPOT -T-HANDLE Assy Handle Grip Globug 4-SPOT Steering Assy Globug 4-SPOT Steering Assy SELF-LOCK NUT M8Globug 4-SPOT Outrigger Assy Bracket OUT,R R Globug 4-SPOT Mast Adapter Assy Part Name Globug 4-SPOT Mast Section Assy Second Mast 52 Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Globug 4-SPOT Operation and Parts Manual REV. #3 12/15/08 Heres HOW to GET Help