Lubrication Oil, Fuel, Air Cleaner, Battery

Lubrication Oil

Fill the engine crankcase with lubricating oil through the filler hole, but do not overfill. Make sure the welder/generator is level.With the dipstick inserted all the way, but without being screw into the filler hole, verify that the oil level is maintained between the two notches (Figure 7) on the dipstick. See Table 4 for proper selection of engine oil.

Figure 7. Engine Oil Dipstick

Table 8. Recommended Motor Oil

Temperature Range

Type Oil

104° F ~ 23° F

SGW-250SS — PRE-SETUP

Fuel

Fill the fuel tank with clean and fresh unleaded gasoline. DO NOT fill the tank beyond capacity.

Pay attention to the fuel tank capacity when replenishing fuel. Refer to the fuel tank capacity listed on page 11, Specification Table 1.

The fuel tank cap must be closed tightly after filling. Handle fuel in a safety container. If the container does not have a spout, use a funnel.

CAUTION :

Never fill the fuel tank while the engine is running or in the dark. Gasoline spillage on a hot engine can cause a fire or explosion. If gasoline spillage occurs, wipe up the spilled gasoline completely to prevent fire hazards.

Air Cleaner

Periodic cleaning/replacement is necessary. Inspect it in accordance with the engine manual.

Battery

This unit is of negative ground. DO NOT connect in reverse. Always maintain battery fluid level between the specified marks. Battery life will be shortened, if the fluid level is not properly maintained. Add only distilled water when replenishment is necessary.

The battery is sufficiently charged if the specific gravity of the battery fluid is 1.28 (at 68° F). If the specific gravity should fall to 1.245 or lower, it indicates that the battery is dead and needs to be recharged or replaced.

Check to see whether the battery cables are loose. Poor

(40° C ~ -5°C)

SAE 30

contact may result in poor starting or malfunctions, always keep the terminals firmly tightened. Coating the terminals

23° F ~ 5° F

SAE 20 or SAE 10W-30

(-5° C ~ -15°C)

Below 5° C (-15°)

SAE 10W or SAE 10W-30

with a thin film of grease will help to inhibit corrosion.

The battery gradually deteriorates over time. The actual life span will vary according to operating conditions, but generally a battery two years or older should be replaced.

PAGE 24 — SGW-250SS DC WELDER/AC GENERATOR— PARTS & OPERATION MANUAL — REV. #2 (08/08/01)

SGW-250SS specifications

The Multiquip SGW-250SS is an innovative and robust generator designed for a wide range of applications, from construction sites to outdoor events. This generator stands out due to its combination of reliability, efficiency, and portability, making it a top choice for professionals and enthusiasts alike.

One of the main features of the SGW-250SS is its powerful 25 kW output. This high output capacity ensures that it can handle multiple tools and equipment simultaneously, making it ideal for construction or industrial applications. The generator is equipped with a durable engine that delivers impressive performance even under heavy loads, ensuring that users can rely on it to meet their power needs without interruption.

In addition to its powerful output, the SGW-250SS boasts a range of advanced technologies aimed at maximizing performance and minimizing operating costs. The generator features an advanced digital control panel that simplifies operation and monitoring. This panel provides essential information such as voltage output, frequency, and operating hours, allowing users to keep track of performance effortlessly.

Another notable characteristic of the SGW-250SS is its robust construction. Designed to withstand harsh environments, this generator features a corrosion-resistant frame and heavy-duty components that enhance its longevity. The generator also offers excellent noise reduction capabilities, making it a suitable option for use in noise-sensitive areas.

Portability is another key aspect of the Multiquip SGW-250SS, as it is designed with mobility in mind. The generator comes equipped with rugged wheels and a foldable handle, allowing for easy transport across various terrains. This feature is particularly beneficial for contractors who need to move the generator frequently between job sites.

Safety features are also integral to the design of the SGW-250SS. It includes low oil shutdown and circuit breaker protection, which help to prevent damage and ensure safe operation. These safety measures are essential in maintaining the generator's reliability and protecting both the equipment and the users.

In summary, the Multiquip SGW-250SS combines power, portability, and safety in a reliable generator package. Its advanced technologies, robust construction, and user-friendly features make it an excellent choice for various professional and recreational applications. Whether for construction, outdoor events, or emergency backup, the SGW-250SS is engineered to deliver performance and peace of mind.