SGW-250SS Maintenance | Multiquip specification

SGW-250SS — MAINTENANCE

General Inspection

At least daily or prior to each use, the welder/AC generator should be cleaned and inspected for deficiencies. Check for loose, missing or damaged nuts, bolts or other fasteners. Also check for fuel or oil leaks.

Engine Side:

For a more detail engine maintenance schedule refer to the HONDA Engine Operator's Manual.

Air Cleaner:

Every 50 hours: Remove air cleaner element by removing the wing bolts and screws. Inspect and clean heavy duty paper element by tapping it several times or blow with compressed air (not to exceed 30 psi). If element is too dirty or damaged, replace. Clean foam element with liquid detergent and hot water or with kerosene. Wrap foam element in a cloth and squeeze dry. Wipe any dirt from the inside of the air cleaner body and cover using a moist rag. Be careful to prevent dirt from entering the air chamber that leads to the carburetor.

Place the foam air filter element to the air cleaner body. Be sure the gaskets are in place, then reinstall the paper air filter element and cover. Tighten the air filter wing bolt securely.

Cleaning the Fuel Strainer

Clean the fuel strainer if it contains dust or water. Remove dust or water in the strainer cap and wash it in gasoline. Securely fasten the fuel strainer cap so that fuel will not leak. Check the fuel strainer every 200 hours of operation or once a month.

Removing Water from the Fuel ank

After prolonged use, water and other impurities accumu- late in the bottom of the fuel tank. Occasionally remove the drain cock and drain the contents. During cold weather, the more empty are inside the tank, the easier it is for water to accumulate inside the tank. This can be reduced by always keeping the fuel tank as full as pos- sible.

Fuel Addition

Always add clean, fresh unleaded fuel. Always pour through mesh lining.

Rectifier Fins

Periodically inspect the rectifier fins for contamination. ALWAYS keep fins free of dirt.

Air Removal

If air enters the fuel system of a gasoline engine, starting becomes impossible. After running out of gasoline, or after disassembling the fuel system, bleed the system by following this procedure:

Turn the operation switch to the ‘ON’ position for 15-30 seconds. Try again, if needed.

PAGE 32 — SGW-250SS DC WELDER/AC GENERATOR— PARTS & OPERATION MANUAL — REV. #2 (08/08/01)

SGW-250SS specifications

The Multiquip SGW-250SS is an innovative and robust generator designed for a wide range of applications, from construction sites to outdoor events. This generator stands out due to its combination of reliability, efficiency, and portability, making it a top choice for professionals and enthusiasts alike.

One of the main features of the SGW-250SS is its powerful 25 kW output. This high output capacity ensures that it can handle multiple tools and equipment simultaneously, making it ideal for construction or industrial applications. The generator is equipped with a durable engine that delivers impressive performance even under heavy loads, ensuring that users can rely on it to meet their power needs without interruption.

In addition to its powerful output, the SGW-250SS boasts a range of advanced technologies aimed at maximizing performance and minimizing operating costs. The generator features an advanced digital control panel that simplifies operation and monitoring. This panel provides essential information such as voltage output, frequency, and operating hours, allowing users to keep track of performance effortlessly.

Another notable characteristic of the SGW-250SS is its robust construction. Designed to withstand harsh environments, this generator features a corrosion-resistant frame and heavy-duty components that enhance its longevity. The generator also offers excellent noise reduction capabilities, making it a suitable option for use in noise-sensitive areas.

Portability is another key aspect of the Multiquip SGW-250SS, as it is designed with mobility in mind. The generator comes equipped with rugged wheels and a foldable handle, allowing for easy transport across various terrains. This feature is particularly beneficial for contractors who need to move the generator frequently between job sites.

Safety features are also integral to the design of the SGW-250SS. It includes low oil shutdown and circuit breaker protection, which help to prevent damage and ensure safe operation. These safety measures are essential in maintaining the generator's reliability and protecting both the equipment and the users.

In summary, the Multiquip SGW-250SS combines power, portability, and safety in a reliable generator package. Its advanced technologies, robust construction, and user-friendly features make it an excellent choice for various professional and recreational applications. Whether for construction, outdoor events, or emergency backup, the SGW-250SS is engineered to deliver performance and peace of mind.