Land Pride 4400ex manual Operator Responsibilities, General Operation, Pre-Start Check List

Page 16

Table of Contents

Section 4: Operating Instructions

Operator Responsibilities

 

! WARNING

! DANGER

It is the operator’s responsibility to have read this manual thoroughly and to know how to operate this vehicle safely in all situations. See "Section 2: Important Safety Information" starting on page 3.

Pre-Start Check List

Lubricate the vehicle as indicated in the Lubrication portion of "Section 7: Lubrication and Fluids" on page 31.

Check tire pressure as indicated in the "Tire Inflation Chart" on page 23.

Make sure wheel lug bolts/nuts are tightened to 65ft. lbs.

All nuts, bolts, screws and fasteners should be checked. Refer to the Torque Value Chart in "Section 12: Appendix" starting on page 45.

Turn on headlights to make sure battery has a charge and electrical lighting circuit is working.

Step on the foot brake and hold down to make sure it can be applied with plenty of pedal movement remaining and that the brakes hold without loosing pressure. Add brake fluid as indicated in "Brake Fluid" on page 34. Bleed brakes if required.

Check park brake to make sure it will engage, hold and release.

Check steering by executing a full lock to lock turn in each direction.

Check neutral start feature by depressing the clutch and starting the vehicle. (The vehicle should not start unless the clutch is depressed.)

Check engine oil level at the dipstick. Add oil as indicated in "Engine Oil" on page 31 if oil is at or below the add mark on the dipstick. Do not overfill or plug fouling will occur.

Check differential oil level at the differential oil plug. Add gear lub as indicated in "Differential Oil" on page 33 if oil is below oil plug outlet.

Check fuel level to make sure there is at least 1/8 of a tank of gas prior to performing initial starting operations.

Allow engine to warms up for 15 minutes or more to reach operating temperature before checking to make sure engine idle speed is set at 1100 +/- 100 rpm and that maximum engine static speed does not exceed 3800 rpm. Modifying or adjusting the carburetor to increase vehicle speed above factory set specification is a safety violation and could result in voiding the warranty.

General Operation

Starting the Engine

Follow starting procedures displayed at the gearshift lever and as noted below.

Avoid injury or death from entanglement in the rotating components and pinch points. All shields must be in place and secure when operating. Keep all persons away from rotating components and pinch points.

1.Set park brake.

2.Place gearshift in neutral. Depress clutch pedal. Engine will not start with clutch pedal out.

3.Apply choke fully when engine is cold.

4.Turn ignition key fully clockwise and hold until engine starts.

5.Release ignition key to run position and choke to normal operating position immediately after engine starts.

6.Turn ignition key counterclockwise to stop engine.

Operating a Gondo is like operating a car with a standard transmission that has four or five speeds forward and one reverse. The keyed 12 volt electronic ignition with a neutral start and clutch depressed feature makes for safe and easy starting.

Braking is accomplished by simply depressing the automotive style brake pedal located on the floorboard. This activates both front and rear automotive type hydraulic drum brakes. Depress clutch and brake pedals when coming to a complete stop. A lever action parking brake is mounted on the floor board between operator and passenger seats. Push the lever forward to the horizontal position to engage the park brake and pull back to the vertical position to release.

Raise cargo box by pulling back and holding on the dump lever. Push forward on the lever and hold to lower the cargo box. Stop cargo box movement by releasing the lever.

!DANGER

Make sure area behind cargo box is clear of personnel before operating the dump lever. Bodily harm can result from being pinched between the cargo box and another object or from a load dumping and/or rolling onto a bystander.

Dashboard Switches and Instruments

Refer to Figure 4-1Aand Figure 4-1Bon page 15

#1 Light Switch: Turns on two sealed beam head lights when the switch key is on. Press top of light switch to turn on lights and bottom of switch to turn off lights.

#2 Auxiliary Switch Slot: A 12 volt on/off accessory switch may be installed at this location to operate an auxiliary accessory such as a power winch.

14

4400EX Heavy Duty Off Road Utility Vehicle 720-051M

6/30/05

Image 16
Contents Gondo Table of Contents Using This Manual Safety FirstApplication Land Pride Service Department East North Street Owner AssistanceSerial Number Plate Product SupportSafety Symbol Be Aware of Signal WordsFor Your Protection Before OperatingPractice Safe Maintenance Tire SafetyPrepare for Emergencies Wear Protective EquipmentSafe Operating Procedures Table of Contents Safety Decals 818-543C838-492C 838-629C 838-486C 838-490C 838-628C 838-444C Dealer Service and Inspection List Pre-Delivery CertificateVehicle Information Dealer Test Ride ListDealer Delivery To Customer List Customer Acceptance ListDashboard Switches and Instruments Operator ResponsibilitiesGeneral Operation Pre-Start Check ListFoot Operated Controls Fuel Indicator Hand Operated ControlsDriving Conditions Towing the Gondo Descending Steep HillsTraverse Traveling on Steep Hills Towing Without a TrailerTraveling Tips From the Trail Masters Table of Contents Gondo Accessories Gondo OptionsRear Cargo Box TiresPrepare Vehicle for Maintenance General MaintenanceTorque Values Tire Maintenance Jacking the VehicleShock Absorbers Electrical SystemJump Starting the Battery BatteryPrepare Vehicle to Jump-Start Disconnecting Jumper Cables Connecting Jumper CablesFuel System Engine Maintenance Fuel Filter and Fuel Line MaintenanceFilling the Fuel Tank Emptying the Fuel TankPower Steering Belt High Altitude Carburetor KitAir Filter Maintenance Schedule Precleaner Foam ElementPrecleaner Element 61 mm deep -083-02-S Engine Air FilterSpark Arrester Maintenance Schedule Spark Arrester Maintenance ProcedureReplacement Parts Spark ArresterMaintenance Schedule Engine Oil Maintenance Schedule Engine OilEngine Oil Type and Capacity Engine Oil Level CheckEngine Oil and Filter Change 6mo/100hrsDifferential Maintenance Schedule Differential Oil Type and CapacityDifferential Oil Level Check Differential Oil ChangeTransmission Fluid Brake FluidSteering & Cargo Lift Cylinder Fluid Grease Type LubricationPillow Block Bearing Rotating Bearing SurfacesEngine Preparation for Storage Vehicle Storage PreparationVehicle Removal From Storage Preparation Short term storage 90 days or lessIntroduction Light ScuffScratch Required Tools and MaterialsDeep Gouge Specifications and Capacities 4400EX SeriesSymptoms Probable Causes Suggested Remedies Battery is dead Battery will not charge upBrakes are sticking won’t release Brakes don’t functionEngine overheats Engine runs unevenlyEngine stops running Gear Shift is malfunctioningPark brake doesn’t work Starter cranks slowlySteering does not track correctly Steering play is excessiveVehicle speed does not reach 17 MPH Vehicle looses ground speed withoutTorque Values Chart In-tpi Ft-lbTable of Contents Land Pride Limited Warranty Utility VehicleCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

4400ex specifications

The Land Pride 4400EX is a versatile and robust implement that is designed for agricultural operations and landscaping tasks. This exceptional piece of equipment stands out for its functionality and durability, making it an ideal choice for both professional landscapers and property owners seeking high-performance tools for ground preparation and maintenance.

One of the most notable features of the Land Pride 4400EX is its heavy-duty construction. Built with a solid frame, it ensures stability and reliability even in the challenging conditions of rugged terrains. The implement is designed to handle various tasks such as grading, leveling, and creating smooth surfaces, establishing it as a go-to choice for diverse applications.

The 4400EX is equipped with advanced technologies that enhance its operational efficiency. The implement utilizes a precision-engineered quick-attach system, allowing users to swap out attachments quickly and without complications. This feature saves valuable time on the job site and increases overall productivity.

Another highlight is its adjustable blade depth, which provides users with the versatility to achieve the desired finish for different projects. Whether users are working in soft soil or hard packed areas, the Land Pride 4400EX can adapt to the task at hand, ensuring a professional-grade result every time.

The implement is also designed with user comfort in mind. It features ergonomic controls that are easy to access, allowing operators to navigate smoothly through tasks without experiencing fatigue. Additionally, the Land Pride 4400EX is compatible with a variety of tractors, making it a flexible addition to any farming or landscaping arsenal.

Maintenance of the 4400EX is straightforward due to its design, which minimizes wear and tear on components. Regular upkeep helps ensure longevity, allowing users to leverage this equipment for years to come.

In conclusion, the Land Pride 4400EX stands out for its exceptional construction, advanced features, and user-friendly design. Its versatility and robust performance make it an invaluable tool for anyone looking to enhance their productivity in agricultural and landscaping tasks. With a focus on reliability and efficiency, the 4400EX continues to be a favored choice among professionals and enthusiasts alike.