Land Pride 4400ex manual Engine Oil Maintenance Schedule, Engine Oil Type and Capacity

Page 33

Table of Contents

Section 7: Lubrication and Fluids

Multi-purpose

spray lube

Multi-purpose

Multi-purpose

grease lube

oil lube

50

Intervals at which

lubrication is required

Engine Oil

Engine lubrication is essential and must be maintained to ensure long engine life. It is extremely important to use proper type and weight of oil in the crankcase. It is also extremely important to check oil daily and change it regularly as outlined in the maintenance schedule.

See Engine Operator’s Manual for a detailed description of engine oil maintenance. Also the Engine Operator’s Manual provides additional information necessary to keep the engine in top operating condition. Follow all maintenance procedures provided in the Engine Operator’s Manual.

NOTE: Running engine low on oil can cause engine damage and void engine warranty.

NOTE: Overfilling of oil level can cause loss of power, engine damage and void engine warranty.

Engine Oil Maintenance Schedule

•Check oil level daily before starting engine.

•Make first oil change after the first month of operation or at 20 hours of operation (whichever comes first).

•Make all subsequent oil changes every 6 months or every 100 hours of operation (whichever comes first)

Engine Oil Type and Capacity

See also "Section 10: Specifications and Capacities" on page 40

•Type of Lubrication based on temperature range

expected before next oil change:

0oF and up - SAE 10W-30

32oF and down - Synthetic SAE 5W-20 or 5W-30

•Service Class: SG, SH, SJ or higher

•Engine Oil Capacity:

2 US qts. / 1.9 liters with filter replacement or Fill to upper limit mark on dipstick.

Engine Oil Level Check

Refer to figure 7-1and figure 7-2

Daily

Check engine oil with the dipstick daily as follows:

2.Allow enough time for engine oil to settle before checking oil level with dipstick.

3.Clean around the dipstick before removing it to keep dirt and debris out of the engine.

4.Remove dipstick and wipe clean.

5.Fully insert dipstick and remove. Oil level on the dipstick should be up to the “F” mark but not over.

6.If oil level on dipstick is low, remove filler cap located on the top left valve cover and fill with recommended oil. Repeat steps 2, 3, 4 and 5 until oil level on dipstick indicates full. Do not overfill or plug fouling and power loss will occur.

7.Replace filler cap and dipstick

Dip Stick

Filler Cap

21354

figure 7-1

21372

figure 7-2

1.Prepare vehicle for maintenance as outlined in steps 1-6 on page 22.

6/30/05

4400EX Heavy Duty Off Road Utility Vehicle 720-051M 31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Gondo Table of Contents Safety First Using This ManualApplication Owner Assistance Land Pride Service Department East North StreetSerial Number Plate Product SupportBe Aware of Signal Words Safety SymbolFor Your Protection Before OperatingTire Safety Practice Safe MaintenancePrepare for Emergencies Wear Protective EquipmentSafe Operating Procedures Table of Contents 818-543C Safety Decals838-492C 838-629C 838-486C 838-490C 838-628C 838-444C Pre-Delivery Certificate Dealer Service and Inspection ListVehicle Information Dealer Test Ride ListCustomer Acceptance List Dealer Delivery To Customer ListOperator Responsibilities Dashboard Switches and InstrumentsGeneral Operation Pre-Start Check ListFoot Operated Controls Hand Operated Controls Fuel IndicatorDriving Conditions Descending Steep Hills Towing the GondoTraverse Traveling on Steep Hills Towing Without a TrailerTraveling Tips From the Trail Masters Table of Contents Gondo Options Gondo AccessoriesRear Cargo Box TiresGeneral Maintenance Prepare Vehicle for MaintenanceTorque Values Jacking the Vehicle Tire MaintenanceShock Absorbers Electrical SystemBattery Jump Starting the BatteryPrepare Vehicle to Jump-Start Connecting Jumper Cables Disconnecting Jumper CablesFuel System Fuel Filter and Fuel Line Maintenance Engine MaintenanceFilling the Fuel Tank Emptying the Fuel TankHigh Altitude Carburetor Kit Power Steering BeltPrecleaner Foam Element Air Filter Maintenance SchedulePrecleaner Element 61 mm deep -083-02-S Engine Air FilterSpark Arrester Maintenance Procedure Spark Arrester Maintenance ScheduleReplacement Parts Spark ArresterMaintenance Schedule Engine Oil Engine Oil Maintenance ScheduleEngine Oil Type and Capacity Engine Oil Level Check6mo/100hrs Engine Oil and Filter ChangeDifferential Oil Type and Capacity Differential Maintenance ScheduleDifferential Oil Level Check Differential Oil ChangeBrake Fluid Transmission FluidGrease Type Lubrication Steering & Cargo Lift Cylinder FluidRotating Bearing Surfaces Pillow Block BearingVehicle Storage Preparation Engine Preparation for StorageVehicle Removal From Storage Preparation Short term storage 90 days or lessLight Scuff IntroductionScratch Required Tools and MaterialsDeep Gouge 4400EX Series Specifications and CapacitiesBattery will not charge up Symptoms Probable Causes Suggested Remedies Battery is deadBrakes are sticking won’t release Brakes don’t functionEngine runs unevenly Engine overheatsGear Shift is malfunctioning Engine stops runningPark brake doesn’t work Starter cranks slowlySteering play is excessive Steering does not track correctlyVehicle speed does not reach 17 MPH Vehicle looses ground speed withoutIn-tpi Ft-lb Torque Values ChartTable of Contents Utility Vehicle Land Pride Limited WarrantyCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

4400ex specifications

The Land Pride 4400EX is a versatile and robust implement that is designed for agricultural operations and landscaping tasks. This exceptional piece of equipment stands out for its functionality and durability, making it an ideal choice for both professional landscapers and property owners seeking high-performance tools for ground preparation and maintenance.

One of the most notable features of the Land Pride 4400EX is its heavy-duty construction. Built with a solid frame, it ensures stability and reliability even in the challenging conditions of rugged terrains. The implement is designed to handle various tasks such as grading, leveling, and creating smooth surfaces, establishing it as a go-to choice for diverse applications.

The 4400EX is equipped with advanced technologies that enhance its operational efficiency. The implement utilizes a precision-engineered quick-attach system, allowing users to swap out attachments quickly and without complications. This feature saves valuable time on the job site and increases overall productivity.

Another highlight is its adjustable blade depth, which provides users with the versatility to achieve the desired finish for different projects. Whether users are working in soft soil or hard packed areas, the Land Pride 4400EX can adapt to the task at hand, ensuring a professional-grade result every time.

The implement is also designed with user comfort in mind. It features ergonomic controls that are easy to access, allowing operators to navigate smoothly through tasks without experiencing fatigue. Additionally, the Land Pride 4400EX is compatible with a variety of tractors, making it a flexible addition to any farming or landscaping arsenal.

Maintenance of the 4400EX is straightforward due to its design, which minimizes wear and tear on components. Regular upkeep helps ensure longevity, allowing users to leverage this equipment for years to come.

In conclusion, the Land Pride 4400EX stands out for its exceptional construction, advanced features, and user-friendly design. Its versatility and robust performance make it an invaluable tool for anyone looking to enhance their productivity in agricultural and landscaping tasks. With a focus on reliability and efficiency, the 4400EX continues to be a favored choice among professionals and enthusiasts alike.
Top Page Image Contents