Land Pride 4400ex Spark Arrester Maintenance Schedule, Spark Arrester Maintenance Procedure

Page 31

Table of Contents

Section 6: Maintenance

carefully to prevent damaging it. Inspect and replace the element if it is dirty, bent or damaged with a genuine Land Pride element. Do not use an element if its sealing surfaces are bent or damaged.

7.Check air cleaner base. Make sure it is not bent or damaged and is secured.

8.Check element cover. Make sure it is not bent or damage and that it fits properly. Replace all damaged air cleaner components.

9.Inspect the air cleaner base for loose dirt or debris that may have fallen on it when the element was removed. Be careful that none of the dirt drops into the intake throat, remove base and wipe it clean.

10.Check the condition of the rubber seal on the air cleaner stud, replace it if its condition is questionable in any way. A new rubber seal is provided with the replacement paper element in a sealed packaged.

11.Reinstall paper element, precleaner, element cover, element cover nut, and air cleaner cover. Secure cover with cover retaining knob.

Order genuine Land Pride parts when replacing the paper element.

Spark Arrester Maintenance Schedule

•Inspect every 100 hours for carbon build-up and screen damage.

•Clean whenever carbon build-up is visible or whenever lost of engine power is detected.

•Replace when damaged.

Spark Arrester Maintenance Procedure

Refer to Figure 6-10

1.Remove spark arrester mounting screws, exhaust deflector and spark arrester from the muffler.

2.Remove carbon deposits from spark arrester screen with a wire bristle brush. Be careful not to damage the spark arrester screen.

3.Inspect the spark arrester for holes or breaks in the screen and replace if damaged.

4.Reattach spark arrester and exhaust deflector to muffler with mounting screws.

Description

Part No.

Paper Element (65 mm deep) . . . . . . . . 47-083-03-S

Spark Arrester

!DANGER

The spark arrester does not stop all fire emitting sparks from escaping the muffler. Use extreme caution when driving through dry grass, brush and other fire hazard materials. Never stop or park the vehicle over combustible materials.

!WARNING

The muffler is very hot and will burn upon contact. Allow time to cool before servicing the spark arrester.

!CAUTION

To maintain efficiency, the spark arrester must be serviced every

100hours.

!CAUTION

Be careful not to damage the spark arrester screen when cleaning.

Refer to Figure 6-10

The spark arrester is mounted inside the muffler behind the muffler exhaust deflector. It is designed to suppress sparks from escaping the muffler while they are still glowing.

Muffler

Spark

Arrester

Exhaust

Deflector

Mounting

Screws

21349

Figure 6-10

Replacement Parts

Description

Part No.

Spark Arrester . . . . . . . . . . . . . . . . . . . . . . 840-174C

6/30/05

4400EX Heavy Duty Off Road Utility Vehicle 720-051M 29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Gondo Table of Contents Using This Manual Safety FirstApplication Product Support Land Pride Service Department East North StreetOwner Assistance Serial Number PlateBefore Operating Safety SymbolBe Aware of Signal Words For Your ProtectionWear Protective Equipment Practice Safe MaintenanceTire Safety Prepare for EmergenciesSafe Operating Procedures Table of Contents 818-543C Safety Decals838-492C 838-629C 838-486C 838-490C 838-628C 838-444C Dealer Test Ride List Dealer Service and Inspection ListPre-Delivery Certificate Vehicle InformationCustomer Acceptance List Dealer Delivery To Customer ListPre-Start Check List Dashboard Switches and InstrumentsOperator Responsibilities General OperationFoot Operated Controls Hand Operated Controls Fuel IndicatorDriving Conditions Towing Without a Trailer Towing the GondoDescending Steep Hills Traverse Traveling on Steep HillsTraveling Tips From the Trail Masters Table of Contents Tires Gondo AccessoriesGondo Options Rear Cargo BoxPrepare Vehicle for Maintenance General MaintenanceTorque Values Electrical System Tire MaintenanceJacking the Vehicle Shock AbsorbersJump Starting the Battery BatteryPrepare Vehicle to Jump-Start Disconnecting Jumper Cables Connecting Jumper CablesFuel System Emptying the Fuel Tank Engine MaintenanceFuel Filter and Fuel Line Maintenance Filling the Fuel TankHigh Altitude Carburetor Kit Power Steering BeltEngine Air Filter Air Filter Maintenance SchedulePrecleaner Foam Element Precleaner Element 61 mm deep -083-02-SSpark Arrester Spark Arrester Maintenance ScheduleSpark Arrester Maintenance Procedure Replacement PartsMaintenance Schedule Engine Oil Level Check Engine Oil Maintenance ScheduleEngine Oil Engine Oil Type and Capacity6mo/100hrs Engine Oil and Filter ChangeDifferential Oil Change Differential Maintenance ScheduleDifferential Oil Type and Capacity Differential Oil Level CheckBrake Fluid Transmission FluidGrease Type Lubrication Steering & Cargo Lift Cylinder FluidRotating Bearing Surfaces Pillow Block BearingShort term storage 90 days or less Engine Preparation for StorageVehicle Storage Preparation Vehicle Removal From Storage PreparationRequired Tools and Materials IntroductionLight Scuff ScratchDeep Gouge 4400EX Series Specifications and CapacitiesBrakes don’t function Symptoms Probable Causes Suggested Remedies Battery is deadBattery will not charge up Brakes are sticking won’t releaseEngine runs unevenly Engine overheatsStarter cranks slowly Engine stops runningGear Shift is malfunctioning Park brake doesn’t workVehicle looses ground speed without Steering does not track correctlySteering play is excessive Vehicle speed does not reach 17 MPHIn-tpi Ft-lb Torque Values ChartTable of Contents Utility Vehicle Land Pride Limited WarrantyCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

4400ex specifications

The Land Pride 4400EX is a versatile and robust implement that is designed for agricultural operations and landscaping tasks. This exceptional piece of equipment stands out for its functionality and durability, making it an ideal choice for both professional landscapers and property owners seeking high-performance tools for ground preparation and maintenance.

One of the most notable features of the Land Pride 4400EX is its heavy-duty construction. Built with a solid frame, it ensures stability and reliability even in the challenging conditions of rugged terrains. The implement is designed to handle various tasks such as grading, leveling, and creating smooth surfaces, establishing it as a go-to choice for diverse applications.

The 4400EX is equipped with advanced technologies that enhance its operational efficiency. The implement utilizes a precision-engineered quick-attach system, allowing users to swap out attachments quickly and without complications. This feature saves valuable time on the job site and increases overall productivity.

Another highlight is its adjustable blade depth, which provides users with the versatility to achieve the desired finish for different projects. Whether users are working in soft soil or hard packed areas, the Land Pride 4400EX can adapt to the task at hand, ensuring a professional-grade result every time.

The implement is also designed with user comfort in mind. It features ergonomic controls that are easy to access, allowing operators to navigate smoothly through tasks without experiencing fatigue. Additionally, the Land Pride 4400EX is compatible with a variety of tractors, making it a flexible addition to any farming or landscaping arsenal.

Maintenance of the 4400EX is straightforward due to its design, which minimizes wear and tear on components. Regular upkeep helps ensure longevity, allowing users to leverage this equipment for years to come.

In conclusion, the Land Pride 4400EX stands out for its exceptional construction, advanced features, and user-friendly design. Its versatility and robust performance make it an invaluable tool for anyone looking to enhance their productivity in agricultural and landscaping tasks. With a focus on reliability and efficiency, the 4400EX continues to be a favored choice among professionals and enthusiasts alike.
Top Page Image Contents