Land Pride 4400ex manual Differential Maintenance Schedule, Differential Oil Type and Capacity

Page 35

Table of Contents

Section 7: Lubrication and Fluids

Differential Oil

Warm oil drains quickly and completely. Drain used oil

Refer to Figure 7-6and Figure 7-7

while it is still warm as follows:

 

Differential lubrication is essential and must be maintained to ensure long life of the differentials. It is extremely important to use proper type and weight of oil. Also, it is important to check and change oil as outlined in the maintenance schedule below.

NOTE: Running vehicle low on differential oil can damage differential and void its warranty.

Differential Maintenance Schedule

•Check case housing for damage and possible oil leakage after each use.

•Check gear lube level every 6 months or every 100 hours (whichever comes first).

•Change gear lube every 5 years or every 500 hours (whichever comes first).

1.Park vehicle on a level surface, set park brake, turn off ignition switch and remove switch key.

2.Place a suitable container below housing to catch used oil. Remove fill plug, level plug and drain plug.

3.Allow used oil to drain completely and then reinstall drain plug and tighten securely with 5 to 15 in. lbs. of torque.

4.Dispose of used oil in a manner that is compatible with the environment. Do not throw used oil in the trash, pour it on the ground, or down a drain.

5.Fill front and rear differential cases with 2 quarts or to bottom of oil level hole with recommended gear lube. See "Section 10: Specifications and Capacities" on page 40.

6.Replace fill plug and oil level plug. Tighten securely with 5 to 15 in. lbs. of torque.

Differential Oil Type and Capacity

See also "Section 10: Specifications and Capacities" on page 40.

•Type of lubrication: S.A.E 80-90 wt. GL-5 Gear Lube

•Lubrication capacity: 2 quarts or fill to bottom of check plug opening.

Differential Oil Level Check

6 mo/100hrs

Check differential gear lube level at oil level check plugs (See Figure 7-6and Figure 7-7). Gear lube level should be filled to edge of oil level check hole.

1.Prepare vehicle for maintenance as outlined in steps 1-6 on page 22.

2.Remove oil level plug and verify oil is level with bottom of plug hole.

3.If low on oil, remove fill plug and add new differential oil until oil is level with bottom of fill hole.

4.Replace both plugs and tighten securely with 5 to 15 in. lbs of torque.

Differential Oil Change

5 yrs/500hrs

Oil Fill Plug

21364

Figure 7-6

Oil Level Plug

21365

Oil Drain Plug

 

Figure 7-7

6/30/05

4400EX Heavy Duty Off Road Utility Vehicle 720-051M 33

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Gondo Table of Contents Application Safety FirstUsing This Manual Product Support Land Pride Service Department East North StreetOwner Assistance Serial Number PlateBefore Operating Safety SymbolBe Aware of Signal Words For Your ProtectionWear Protective Equipment Practice Safe MaintenanceTire Safety Prepare for EmergenciesSafe Operating Procedures Table of Contents 818-543C Safety Decals838-492C 838-629C 838-486C 838-490C 838-628C 838-444C Dealer Test Ride List Dealer Service and Inspection ListPre-Delivery Certificate Vehicle InformationCustomer Acceptance List Dealer Delivery To Customer ListPre-Start Check List Dashboard Switches and InstrumentsOperator Responsibilities General OperationFoot Operated Controls Hand Operated Controls Fuel IndicatorDriving Conditions Towing Without a Trailer Towing the GondoDescending Steep Hills Traverse Traveling on Steep HillsTraveling Tips From the Trail Masters Table of Contents Tires Gondo AccessoriesGondo Options Rear Cargo BoxTorque Values General MaintenancePrepare Vehicle for Maintenance Electrical System Tire MaintenanceJacking the Vehicle Shock AbsorbersPrepare Vehicle to Jump-Start BatteryJump Starting the Battery Fuel System Connecting Jumper CablesDisconnecting Jumper Cables Emptying the Fuel Tank Engine MaintenanceFuel Filter and Fuel Line Maintenance Filling the Fuel TankHigh Altitude Carburetor Kit Power Steering BeltEngine Air Filter Air Filter Maintenance SchedulePrecleaner Foam Element Precleaner Element 61 mm deep -083-02-SSpark Arrester Spark Arrester Maintenance ScheduleSpark Arrester Maintenance Procedure Replacement PartsMaintenance Schedule Engine Oil Level Check Engine Oil Maintenance ScheduleEngine Oil Engine Oil Type and Capacity6mo/100hrs Engine Oil and Filter ChangeDifferential Oil Change Differential Maintenance ScheduleDifferential Oil Type and Capacity Differential Oil Level CheckBrake Fluid Transmission FluidGrease Type Lubrication Steering & Cargo Lift Cylinder FluidRotating Bearing Surfaces Pillow Block BearingShort term storage 90 days or less Engine Preparation for StorageVehicle Storage Preparation Vehicle Removal From Storage PreparationRequired Tools and Materials IntroductionLight Scuff ScratchDeep Gouge 4400EX Series Specifications and CapacitiesBrakes don’t function Symptoms Probable Causes Suggested Remedies Battery is deadBattery will not charge up Brakes are sticking won’t releaseEngine runs unevenly Engine overheatsStarter cranks slowly Engine stops runningGear Shift is malfunctioning Park brake doesn’t workVehicle looses ground speed without Steering does not track correctlySteering play is excessive Vehicle speed does not reach 17 MPHIn-tpi Ft-lb Torque Values ChartTable of Contents Utility Vehicle Land Pride Limited WarrantyCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

4400ex specifications

The Land Pride 4400EX is a versatile and robust implement that is designed for agricultural operations and landscaping tasks. This exceptional piece of equipment stands out for its functionality and durability, making it an ideal choice for both professional landscapers and property owners seeking high-performance tools for ground preparation and maintenance.

One of the most notable features of the Land Pride 4400EX is its heavy-duty construction. Built with a solid frame, it ensures stability and reliability even in the challenging conditions of rugged terrains. The implement is designed to handle various tasks such as grading, leveling, and creating smooth surfaces, establishing it as a go-to choice for diverse applications.

The 4400EX is equipped with advanced technologies that enhance its operational efficiency. The implement utilizes a precision-engineered quick-attach system, allowing users to swap out attachments quickly and without complications. This feature saves valuable time on the job site and increases overall productivity.

Another highlight is its adjustable blade depth, which provides users with the versatility to achieve the desired finish for different projects. Whether users are working in soft soil or hard packed areas, the Land Pride 4400EX can adapt to the task at hand, ensuring a professional-grade result every time.

The implement is also designed with user comfort in mind. It features ergonomic controls that are easy to access, allowing operators to navigate smoothly through tasks without experiencing fatigue. Additionally, the Land Pride 4400EX is compatible with a variety of tractors, making it a flexible addition to any farming or landscaping arsenal.

Maintenance of the 4400EX is straightforward due to its design, which minimizes wear and tear on components. Regular upkeep helps ensure longevity, allowing users to leverage this equipment for years to come.

In conclusion, the Land Pride 4400EX stands out for its exceptional construction, advanced features, and user-friendly design. Its versatility and robust performance make it an invaluable tool for anyone looking to enhance their productivity in agricultural and landscaping tasks. With a focus on reliability and efficiency, the 4400EX continues to be a favored choice among professionals and enthusiasts alike.
Top Page Image Contents