Land Pride 4400ex manual Safe Operating Procedures

Page 7

Table of Contents

Section 2: Important Safety Information

Safe Operating Procedures

The safe operation of any machinery is a big concern to all consumers. Your Gondo has been designed with many built-in safety features. However, no one should operate this vehicle before carefully reading this Operator’s Manual. Also read all instructions noted on the safety decals.

▲Do not wear clothing or other articles that hangs loosely. Hanging clothing, long hair, jewelry etc. can catch in the tires and other rotating objects.

▲Keep hands, feet, long hair, clothing and jewelry away from moving parts and obvious pinch points to avoid getting caught.

▲Some conditions may warrant extra safety gear to be worn such as safety helmets and/or goggles.

!WARNING

Most accidents with off road vehicles occur when traveling up, down, or across the face of a slope. Refer to operation instructions and safety video for proper operation procedures.

▲Be familiar with all functions of this vehicle.

▲Keep all bystanders away from this vehicle during operation.

▲Do not allow anyone to operate this vehicle who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of this vehicle.

▲Do not operate a vehicle with damaged or defective parts. Repair all damages and defective parts before putting vehicle back in to service.

▲Do not allow anyone under 16 years of age to operate this vehicle.

▲Operator must always use both hands on the steering wheel.

▲A rider may, without knowing it, place his foot on the accelerator pedal while bracing himself against a rough ride. This makes it impossible to slow down the vehicle until the passenger removes his foot from the pedal. Inform the passenger to keep his foot off the accelerator and always slow down before the ride gets rough.

▲Operator and passenger are responsible for deciding if their situation warrants using seat belts if so equipped.

▲Do not use cargo bed as an additional passenger carrier.

▲Do not use cargo bed as a working platform.

▲The cargo power lift is designed to dump cargo only. Do not use it to lift other objects.

▲No riders allowed except in factory designed and supplied seating and no more than one person in a seat. Do not use cargo bed for carrying people. Maximum vehicle occupancy including driver is 2.

▲Operate vehicle from driver’s seat only.

▲Do not leave vehicle unattended with engine running.

▲Do not dismount a moving vehicle as serious injury or death could occur.

▲Always operate vehicle with all guards installed. Do not leave pulleys, belts and other rotating components exposed.

▲Wear snug-fitting clothing to avoid entanglement with moving parts.

▲Keep hands, arms, feet and all bodily appendages safely inside the confines of the vehicle. Always be aware of and avoid tree limbs and brush that have a potential of hitting and/or poking individuals riding the vehicle. Serious body harm could result.

▲Make sure area behind cargo box is clear of personnel before operating the dump lever. Bodily harm can result from being pinched between the cargo box and another object or from a load dumping and/or rolling onto a bystander.

▲Do not touch engine, engine exhaust pipe and/or muffler while they are hot.

▲Use extreme caution when driving through dry grass, brush and other fire hazard materials. Never stop or park over combustible materials. Keep grass and brush from collecting on and around engine and muffler parts.

▲Battery fumes are explosive. A spark will ignite battery fumes. Wear a face shield when charging or jumping a battery. Follow all battery safety rules outlined in this manual.

▲Always disconnect the negative battery terminal before making adjustments to the vehicle electrical system or welding on this vehicle.

▲Avoid battery acid spills. Do not get battery acid on eyes, face, or other body parts. Flush eyes and other body parts immediately with water for at least 15 minutes if battery acid has gotten on them.

▲Avoid pinch point hazards. Cargo bed, seat platform and vehicle center pivot steering hinge creating pinch points.

▲Do not stand, reach or allow any body part to enter between the cab and cargo bed (articulating area) while vehicle is running. This is an extremely high dangerous pinch point area caused from turning the steering wheel.

▲Always make certain the articulating area between the cab and cargo bed is clear of personnel before turning the steering wheel. The steering wheel will turn the vehicle at its articulation point whether the vehicle is running or not.

▲Do not operate this vehicle on highways, public roads, or where it may be a hazard to faster moving traffic.

▲Never attempt wheelies, jumps, or other stunts. Never drive recklessly. Always operate your vehicle at a safe speed that will allow you to maintain control.

▲Never modify any parts on the vehicle without authorization. Unauthorized modifications will void warranty to all parts directly and indirectly affected by the modification.

6/30/05

4400EX Heavy Duty Off Road Utility Vehicle 720-051M 5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Gondo Table of Contents Using This Manual Safety FirstApplication Product Support Land Pride Service Department East North StreetOwner Assistance Serial Number PlateBefore Operating Safety SymbolBe Aware of Signal Words For Your ProtectionWear Protective Equipment Practice Safe MaintenanceTire Safety Prepare for EmergenciesSafe Operating Procedures Table of Contents 818-543C Safety Decals838-492C 838-629C 838-486C 838-490C 838-628C 838-444C Dealer Test Ride List Dealer Service and Inspection ListPre-Delivery Certificate Vehicle InformationCustomer Acceptance List Dealer Delivery To Customer ListPre-Start Check List Dashboard Switches and InstrumentsOperator Responsibilities General OperationFoot Operated Controls Hand Operated Controls Fuel IndicatorDriving Conditions Towing Without a Trailer Towing the GondoDescending Steep Hills Traverse Traveling on Steep HillsTraveling Tips From the Trail Masters Table of Contents Tires Gondo AccessoriesGondo Options Rear Cargo BoxPrepare Vehicle for Maintenance General MaintenanceTorque Values Electrical System Tire MaintenanceJacking the Vehicle Shock AbsorbersJump Starting the Battery BatteryPrepare Vehicle to Jump-Start Disconnecting Jumper Cables Connecting Jumper CablesFuel System Emptying the Fuel Tank Engine MaintenanceFuel Filter and Fuel Line Maintenance Filling the Fuel TankHigh Altitude Carburetor Kit Power Steering BeltEngine Air Filter Air Filter Maintenance SchedulePrecleaner Foam Element Precleaner Element 61 mm deep -083-02-SSpark Arrester Spark Arrester Maintenance ScheduleSpark Arrester Maintenance Procedure Replacement PartsMaintenance Schedule Engine Oil Level Check Engine Oil Maintenance ScheduleEngine Oil Engine Oil Type and Capacity6mo/100hrs Engine Oil and Filter ChangeDifferential Oil Change Differential Maintenance ScheduleDifferential Oil Type and Capacity Differential Oil Level CheckBrake Fluid Transmission FluidGrease Type Lubrication Steering & Cargo Lift Cylinder FluidRotating Bearing Surfaces Pillow Block BearingShort term storage 90 days or less Engine Preparation for StorageVehicle Storage Preparation Vehicle Removal From Storage PreparationRequired Tools and Materials IntroductionLight Scuff ScratchDeep Gouge 4400EX Series Specifications and CapacitiesBrakes don’t function Symptoms Probable Causes Suggested Remedies Battery is deadBattery will not charge up Brakes are sticking won’t releaseEngine runs unevenly Engine overheatsStarter cranks slowly Engine stops runningGear Shift is malfunctioning Park brake doesn’t workVehicle looses ground speed without Steering does not track correctlySteering play is excessive Vehicle speed does not reach 17 MPHIn-tpi Ft-lb Torque Values ChartTable of Contents Utility Vehicle Land Pride Limited WarrantyCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

4400ex specifications

The Land Pride 4400EX is a versatile and robust implement that is designed for agricultural operations and landscaping tasks. This exceptional piece of equipment stands out for its functionality and durability, making it an ideal choice for both professional landscapers and property owners seeking high-performance tools for ground preparation and maintenance.

One of the most notable features of the Land Pride 4400EX is its heavy-duty construction. Built with a solid frame, it ensures stability and reliability even in the challenging conditions of rugged terrains. The implement is designed to handle various tasks such as grading, leveling, and creating smooth surfaces, establishing it as a go-to choice for diverse applications.

The 4400EX is equipped with advanced technologies that enhance its operational efficiency. The implement utilizes a precision-engineered quick-attach system, allowing users to swap out attachments quickly and without complications. This feature saves valuable time on the job site and increases overall productivity.

Another highlight is its adjustable blade depth, which provides users with the versatility to achieve the desired finish for different projects. Whether users are working in soft soil or hard packed areas, the Land Pride 4400EX can adapt to the task at hand, ensuring a professional-grade result every time.

The implement is also designed with user comfort in mind. It features ergonomic controls that are easy to access, allowing operators to navigate smoothly through tasks without experiencing fatigue. Additionally, the Land Pride 4400EX is compatible with a variety of tractors, making it a flexible addition to any farming or landscaping arsenal.

Maintenance of the 4400EX is straightforward due to its design, which minimizes wear and tear on components. Regular upkeep helps ensure longevity, allowing users to leverage this equipment for years to come.

In conclusion, the Land Pride 4400EX stands out for its exceptional construction, advanced features, and user-friendly design. Its versatility and robust performance make it an invaluable tool for anyone looking to enhance their productivity in agricultural and landscaping tasks. With a focus on reliability and efficiency, the 4400EX continues to be a favored choice among professionals and enthusiasts alike.
Top Page Image Contents