Kunz C60K, H60T, H60B, E60B owner manual For Model H60H

Page 11
Manual background

For Model H60H:

Set the throttle to slow so the mower blades clutch will disengage.

Allow engine to cool down for a short time before moving the throttle control to the stop position.

For Model E60B:

Slow the engine speed down and disengage the clutch handle.

Allow engine to cool down for a short time before moving the throttle control to the stop position.

F.MOWER OPERATION

Clean or replace any safety signs that are not readable or damaged.

Remove all objects from the work area that might be picked up and thrown by the blades.

Do not mow when children and others are around.

Do not fill fuel tank while engine is running or hot.

Keep all safety shields and deflectors in place during operation.

Remove grass build up from under safety shields before each use. Do not remove safety shields while engine is running. Dry grass build up around belts and sheaves can cause fires.

Shut off engine before disconnecting the wing mower from the tow vehicle or attempting to move the wing mower by hand.

Never carry children or passengers.

Do not allow children to operate this machine.

Slow down and watch the ends of the wing mowers when making turns so objects are not struck and/or run over.

Depending on the number of wing mowers being towed, it is usually more efficient to mow the large areas first with the full system. Once the large areas are completed, mowers can be dropped off to mow narrower areas.

10

Image 11
Contents C60K With Assembly Instructions For Models C60K, H60T, H60H & E60B60” FINISH CUT OWNER’S MANUALOptional hitches ASSEMBLY INSTRUCTIONSA. ASSEMBLY OF MOWER WHEELS You should haveFigure 2 Installation of Caster Support Stop Direct Behind Tongue Position Offset Tongue PositionRead all Owners Manuals before using equipment OPERATIONS AND ADJUSTMENTSD. INSTALLATION OF OPTIONAL HITCHES A. HITCH CONFIGURATIONS Refer to Figure B. ATV TONGUE CONFIGURATIONS Refer to Figure C. ADJUSTING CUTTING HEIGHT For Model H60H The engine full speed setting with mower blades running is 3350 RPMD. STARTING ENGINE Start engine and move throttle toward slow position to disengage choke For Model H60H Backing up with one wing mower is easy. Backing becomes a greater challenge as additional wing mowers are towed. Avoid backing up by planning ahead. Make loops instead of backing Model C60K - See Figure G. DRIVE BELT REMOVAL AND TENSIONModels H60T & H60H - See Figure For Model E60B - See Figure Always balance the mower blades each time they are sharpened H. MOWER BLADE REMOVAL, BALANCING & INSTALLATIONSharp blades can cause bodily injury if not handled properly L. STORAGE I. LUBRICATIONJ. TIRE PRESSURE K. TRANSPORTATION OF MOWERENGINE WING MOWER SPECIFICATIONSDIMENSIONS ModelH60H E60BC60K ACREASE WING MOWER PARTS MODEL C60KDescription C60K MODELH60T ACREASE WING MOWER PARTS MODEL H60TH60T E60B ACREASE WING MOWER PARTS MODEL E60BMODEL E60B Quantity ACREASE WING MOWER PARTS MODEL H60HMODEL H60H H60T, E60B & H60H LAWN & GARDEN HITCH PARTSDescription ATV TONGUE PARTSOPTIONAL HITCH PARTS Clean or Replace Any Safety Signs That Are not Readable or Damaged SAFETY SIGNS AND LOCATIONSOPTIONAL FLOATATION KIT OPTIONAL EQUIPMENT