Kunz C60K, H60T, H60B, E60B Wing Mower Specifications, Model, Engine, H60H, Clutch Type

Page 18

WING MOWER SPECIFICATIONS

	Model	Model
ENGINE:	E60B	H60H
ENGINE:
Engine Make	Briggs & Stratton	Honda
Engine Model	Intek	GXV390
Cylinders	1	1
Cycles	4	4
Crankshaft	Vertical	Vertical
Engine HP	13	13
Bore	3.44”	3.46”
Stroke	2.26”	2.52”
Displacement	21.0 cu. in.	23.7 cu. in.
Oil Capacity	1.5 U.S. qts	1.2 U.S. qts
Crankshaft Dia.	1.0"	1.0"
Key Slot	1/4"	1/4"
Crankshaft Length	3.15"	3.12"
Threaded Hole in End of Crankshaft	7/16 - 20	7/16 - 20
Engine Mounting Bolts	5/16-18 x 1-1/2	5/16-18 x 1-1/2” and 5/16-24 x 1”
Starter	Manual	Manual
Choke	With Throttle Control	With Throttle Control
MOWER:
Fuel Tank	3 Quart	3-3/4 Gal.
Effective Cutting Width	58"	58"
Deck Construction	11 ga. Welded steel	11 ga. Welded steel
Cutting Height	1" to 4"	1" to 4"
Height Adjustment	4 screws	4 screws
Anti-Scalp Wheels	4 in front, 2 in rear	4 in front, 2 in rear
(3" O.D. x 1-1/4" wide)
Rear Wheels (Fixed)	2 13/500 x 6	2 13/500 x 6
(2 ply Turf Pnuematic)
Front Wheels (Caster)	2 9/350 x 4	2 9/350 x 4
(Semi Pnuematic)
Blade Dia.	3-20"	3-20"
Engine Speed, Blades Running	3350 RPM	3350 RPM
CLUTCH TYPE
Engagement Speed	Manual	1850 RPM
DIMENSIONS
Length	52"	52"
Width	72-1/4"	72-1/4"
Height	24-1/2"	24-1/2"
Weight	335 lbs	325 lbs
TOUCH-UP PAINT COLOR	Pewter Gray, Krylon #1606	Pewter Gray, Krylon #1606

17

Image 18

Contents OWNER’S MANUAL With Assembly Instructions For Models C60K, H60T, H60H & E60B60” FINISH CUT C60KYou should have ASSEMBLY INSTRUCTIONSA. ASSEMBLY OF MOWER WHEELS Optional hitchesFigure 2 Installation of Caster Support Stop Offset Tongue Position Direct Behind Tongue PositionOPERATIONS AND ADJUSTMENTS D. INSTALLATION OF OPTIONAL HITCHESRead all Owners Manuals before using equipment A. HITCH CONFIGURATIONS Refer to Figure B. ATV TONGUE CONFIGURATIONS Refer to Figure C. ADJUSTING CUTTING HEIGHT The engine full speed setting with mower blades running is 3350 RPM D. STARTING ENGINEFor Model H60H Start engine and move throttle toward slow position to disengage choke For Model H60H Backing up with one wing mower is easy. Backing becomes a greater challenge as additional wing mowers are towed. Avoid backing up by planning ahead. Make loops instead of backing G. DRIVE BELT REMOVAL AND TENSION Models H60T & H60H - See FigureModel C60K - See Figure For Model E60B - See Figure H. MOWER BLADE REMOVAL, BALANCING & INSTALLATION Sharp blades can cause bodily injury if not handled properlyAlways balance the mower blades each time they are sharpened K. TRANSPORTATION OF MOWER I. LUBRICATIONJ. TIRE PRESSURE L. STORAGEModel WING MOWER SPECIFICATIONSDIMENSIONS ENGINEE60B H60HACREASE WING MOWER PARTS MODEL C60K DescriptionC60K MODEL C60KACREASE WING MOWER PARTS MODEL H60T H60TH60T ACREASE WING MOWER PARTS MODEL E60B E60BMODEL E60B ACREASE WING MOWER PARTS MODEL H60H QuantityMODEL H60H LAWN & GARDEN HITCH PARTS H60T, E60B & H60HATV TONGUE PARTS OPTIONAL HITCH PARTSDescription SAFETY SIGNS AND LOCATIONS Clean or Replace Any Safety Signs That Are not Readable or DamagedOPTIONAL EQUIPMENT OPTIONAL FLOATATION KIT