Kunz C60K, H60T, H60B, E60B Wing Mower Specifications, Model, Engine, Clutch Type, Dimensions

Page 17

WING MOWER SPECIFICATIONS

	Model	Model
ENGINE:	H60T	C60K
ENGINE:
Engine Make	Tecumseh Enduro	Kohler Command Pro
Engine Model	OHV130-EXE	CV 15S
Cylinders	1	1
Cycles	4	4
Crankshaft	Vertical	Vertical
Engine HP	13	15
Bore	3.31"	3.55"
Stroke	2.53"	2.64"
Displacement	21.82 cu.in.	26 cu.in.
Oil Capacity	1 U.S. qts.	2 U.S. qts.
Crankshaft Dia.	1"	1"
Key Slot	1/4"	1/4"
Crankshaft Length	3.15"	3.15"
Threaded Hole in End of Crankshaft	7/16-20	7/16-20
Engine Mounting Bolts	5/16-18 x 1-1/2	M8 x 1.25 - 25
Starter	Electric	Electric
Choke	Manual	Manual
MOWER:
Fuel Tank	3.75 gal.	3.75 gal.
Effective Cutting Width	58"	58"
Deck Construction	11 ga. Welded steel	10 ga. Welded steel
Cutting Height	1" to 4"	1" to 4"
Height Adjustment	4 screws	4 screws
Anti-Scalp Wheels	4 in front, 2 in rear	4 in front, 2 in rear
(3" O.D. x 1-1/4" wide)
Rear Wheels (Fixed)	2 13/500 x 6	2 13/500 x 6
(2 ply Turf Pnuematic)
Front Wheels (Caster)	2 9/350 x 4	2 9/350 x 4
(Semi Pnuematic)
Blade Dia.	3-20"	3-20"
Engine Speed, Blades Running	3350 RPM	3350 RPM
CLUTCH TYPE	Centrifugal	Centrifugal
Engagement Speed	1850 RPM	1850 RPM
DIMENSIONS
Length	52"	52"
Width	72-1/4"	72-1/4"
Height	24-1/2"	25"
Weight	325#	380#
TOUCH-UP PAINT COLOR	Pewter Gray, Krylon #1606	Pewter Gray, Krylon #1606

16

Image 17

Contents 60” FINISH CUT With Assembly Instructions For Models C60K, H60T, H60H & E60BOWNER’S MANUAL C60KA. ASSEMBLY OF MOWER WHEELS ASSEMBLY INSTRUCTIONSYou should have Optional hitchesFigure 2 Installation of Caster Support Stop Direct Behind Tongue Position Offset Tongue PositionRead all Owners Manuals before using equipment OPERATIONS AND ADJUSTMENTSD. INSTALLATION OF OPTIONAL HITCHES A. HITCH CONFIGURATIONS Refer to Figure B. ATV TONGUE CONFIGURATIONS Refer to Figure C. ADJUSTING CUTTING HEIGHT For Model H60H The engine full speed setting with mower blades running is 3350 RPMD. STARTING ENGINE Start engine and move throttle toward slow position to disengage choke For Model H60H Backing up with one wing mower is easy. Backing becomes a greater challenge as additional wing mowers are towed. Avoid backing up by planning ahead. Make loops instead of backing Model C60K - See Figure G. DRIVE BELT REMOVAL AND TENSIONModels H60T & H60H - See Figure For Model E60B - See Figure Always balance the mower blades each time they are sharpened H. MOWER BLADE REMOVAL, BALANCING & INSTALLATIONSharp blades can cause bodily injury if not handled properly J. TIRE PRESSURE I. LUBRICATIONK. TRANSPORTATION OF MOWER L. STORAGEDIMENSIONS WING MOWER SPECIFICATIONSModel ENGINEH60H E60BC60K ACREASE WING MOWER PARTS MODEL C60KDescription C60K MODELH60T ACREASE WING MOWER PARTS MODEL H60TH60T E60B ACREASE WING MOWER PARTS MODEL E60BMODEL E60B Quantity ACREASE WING MOWER PARTS MODEL H60HMODEL H60H H60T, E60B & H60H LAWN & GARDEN HITCH PARTSDescription ATV TONGUE PARTSOPTIONAL HITCH PARTS Clean or Replace Any Safety Signs That Are not Readable or Damaged SAFETY SIGNS AND LOCATIONSOPTIONAL FLOATATION KIT OPTIONAL EQUIPMENT