ESIN UIE
RAIN LOATION
We recommend the K67179 rain for this installation The K67179 rain has been specially designed for the ustom odySpa and uses a large capacity strainer and drain tube to reduce drainage time The drain tube section of the K67179 rain is provided by the installer and must be 161/26inch I rigid PV tubing
The K67179 rain overflow assembly is designed for a finished wall thickness between 3/4 and 163/46inches and for a maximum finished basin thickness of 161/26inches at the drain
The drain should not be located more than 486inches from the drain tee
Refer to the roughing6in information included with the K67179 rain for specific details
NOTE: The K67179 rain is packed with its own installation instructions Please refer to that document to install the drain
You can use a floor drain other than the K67179 if you wish ny floor drain used for this installation must drain water at a minimum rate
of 10 gallons per minute to minimize drainage time and must use 161/26inch I drain tubing e sure to follow the drain manufacturers instructions
WATERPROOFIN MATERIAL
WARNIN: Risk of proprty damag and
concald lakag To achieve a watertight odySpa installation it is critical that you install a waterproofing membrane or applied compound according to the material manufacturers instructions Kohler o will not be liable for damage caused by waterproofing materials that are improperly installed or sealed
The ustom odySpa produces water flow ratesup to gallons pr minutTo achieve a watertight installation it is critical that you install a waterproofing membrane or applied compound tontirthe floor and
wall surfaces up to the ceiling You must follow the material manufacturers instructions to ensure a watertight installation
116347626AA | 6 | Kohler o Kohler WI |