INSTALL CEMENT BOARD
Install cement board to the walls according to established installation methods. The cement board must cover the entire wall surface from ceiling to subfloor. Provide a cut6out area around the mounting frame.
Mark the cement board for the suction fitting hole by first measuring up at least 6/6inches from the footbath basin material. Add the thickness of the finished floor material you plan to use, and draw a pencil mark at that location. Make sure the wall is perfectly flat and smooth within a 6inch diameter area around the suction hole pencil
mark. Use a hole saw to drill a 36/46inch hole in the cement board at the pencil mark.
Carefully cut holes for the water supplies, suction, drain and drain overflow, as well as any lighting fixtures or other required accessories.
Cut a hole around the keypad outlet box, if |
| |
you are not using the outlet box, cut or drill |
| |
6/6inch diameter hole for the cable. | INSTALLATION | |
CONSTRUCT FOOTBATH BASIN | ||
| ||
Construct the footbath basin according to your |
| |
specific BodySpa room design. Employ established |
| |
shower basin fabrication materials and techniques. |
| |
Provide a /4 to /6inch per foot pitch to the |
| |
footbath basin floor for the correct floor drainage. |
| |
Locate and cut the drain and drain overflow holes |
| |
according to the instructions packed with the drain. |
| |
The K677 Drain has been specially designed for the |
| |
Custom BodySpa, and is recommended for use with |
| |
this installation. The installation instructions |
| |
included with the K677 Drain provide detailed |
| |
instructions for this installation. Install the drain |
| |
flange according to the drain instructions. |
| |
INSTALL WATER0RESISTANT WALL |
| |
MATERIAL |
| |
Install water6resistant wall material to the entire |
| |
ceiling surface according to established methods. |
|
Check Point #7
-Waterproofing membrane or compound installed.
-Suction bushing installed.
-Cement board installed to subfloor and walls.
-Required holes marked and cut in cement board.
-Confirm footbath basin floor pitch of 1/4 to 1/20inch per foot.
34766AA (A) | Kohler Co., Kohler, WI |