Jonsered SM 2055 E manual Rails, Log Bolsters a, Folding Stops C, Height Adjustment B, Log Locks D

Page 13

DESCRIPTION

Rails

The rails consist of two sections (standard delivery). Each section is 3 m. The sections are aligned and bolted together into a track for the carriage. The rail sections are bolted together and fastened using M12 bolts with nuts, which assures stability and ensures that the carriage runs straight.

The rails also have a number of transverse log bol- sters, designed to provide a stable support for the log to be cut or the planks to be trimmed.

The rails’ transverse log bolsters are equipped with:

•Folding stop for the log

•Log lock

•Height adjustment of one end of the log

The rails are also fitted with stops at both ends for the saw carriage, as well as adjustable jointing plates on the section joints.

FIG. 12

FIG. 13

Log Bolsters (A)

The rails have a number of transverse log bolsters that provide a stable support for the log to be cut or the planks to be trimmed.

Folding Stops (C)

There are a number of folding stops for the log on the left-hand side of the rails. To increase usability, the stops come in two different lengths.

Height Adjustment (B)

The height adjustment is designed to raise the small end of the log, so that the core becomes horizontal.

Log Locks (D)

The log locks consist of a cam with handle, housed in a moveable unit. The locks are used to secure the log against the folding stops.

English – 13

Image 13

Contents SM 2186 SM 2055 E Table of Contents Introduction IntroductionSymbols KEY to SymbolsSafety Regulations Safety RegulationsPersonal Protective Equipment Fuel Safety One-man Sawmill Safety EquipmentSafety During Use Risk ZoneOne-man sawmill chain saw engine DescriptionOne-man Sawmill Electric Motor One-man sawmill with electric motor and feed Saw carriage FIG Height Setting FIGFrame and FIG Handlebars FIGVibration damping plate for the chain saw FIG Chain oil tank FIGBar and chain FIG Feed unit for chain sawmill with electric motor FIGChain saw engine FIG MotorsElectric Motor FIG Electric motor feed unit FIGRails Height Adjustment BLog Bolsters a Folding Stops CRail Stop Adjustable Support FeetRail Guard Safety Devices Installation InstallationInstallation Site UnpackingSaw Carriage Adjustment FIG Setting up the Saw Carriage FIGInstall the bar FIG Install chain saw and bar FIGOne-man sawmill with chain saw engine One-man sawmill with electric motorInstall the handlebar FIG Install scale pointer and scale FIGInstall throttle and cable FIG Checking the bar Adjusting the barFuel chain saw engine Fuel HandlingPetrol Mixing Two-stroke oilFuelling Starting a cold chain saw engine FIG Starting and StoppingStopping the chain saw engine FIG Starting the electric sawmill with feed FIG Starting the electric sawmill FIGSecuring the Log USESawing Calculating the YieldStarting the Electric Motor Starting the Petrol EngineEdging FIG Clutch drum MaintenanceSaw chain Drive belt Saw unit’s height adjustmentDaily maintenance MaintenanceWeekly maintenance Monthly maintenanceTechnical data Technical DataVibration Levels Noise LevelsEU Declaration of Conformity only applies to Europe Page 2003W50 108 89