USE
Calculating the Yield
Measure the log’s top end and determine how the log should be utilised for the timber in question. Include the thickness of the saw cut in the calculation.
The saw cut thickness = 7 mm.
Sawing
FIG. 45
!WARNING!
Use the following protective equipment when sawing:
•Boots or shoes fitted with steel toecaps.
•Hearing protection.
•Eye protection.
•Always have a first aid kit nearby.
Before starting the engine, check that:
•All guards are fitted and undamaged.
•No unauthorised personnel are within the risk zone.
1.Place the log on the rails facing the folding log supports (FIG. 44).
2.Set the height of the bandsaw blade using the crank (11).
3.Clean any sand from the log, if necessary. This results in less wear.
4.Check and if necessary top up the chain oil tank with chain oil on each sawmill.
5.Check the fuel tank and fill with fuel if necessary, see page 22.
6.Check that the chain runs in the right direction, see page 18.
FIG. 46 |
11 |
26 – English