Marantz SR5001 Volume control knob, ATT Attenuate button, Mute button, Mode button, Band button

!2 VOLUME control knob

Adjusts the overall sound level. Turning the control clockwise increases the sound level.

!3 ATT (Attenuate) button

If the selected analog audio input signal is greater than the capable level of internal processing, the PEAK indicator will illuminate. If this happens, you should press the ATT button. “ATT” is displayed when this function is activated.

The signal-input level is reduced by about half. Attenuation will not work with the output signal of “REC OUT” (TAPE, CD-R/MD, VCR1 and VCR2 output). This function is memorized for each input function.

!4 MUTE button

Press this button to mute the output to the speakers. Press it again to return to the previous volume level.

!5 T-MODE button

Press this button to select the auto stereo mode or mono mode when the FM band is selected.

The “AUTO” indicator lights in the auto stereo mode. (See page 38)

!6 BAND button

Press this button to switch between FM and AM in the TUNER mode.

!7 EXIT button

This button is used to exit from the SETUP MAIN MENU.

!8 Cursor (1, 2, 3, 4) / ENTER button

Use these buttons when operating the SETUP MAIN MENU and TUNER function.

!9 MENU button

This button is used to enter the SETUP MAIN MANU.

@0 HT-EQ button

Used to turn on or off HT(Home Theater)-EQ mode. This mode compensates for the audio portion of a movie sounding “bright”. When this button is pressed, “EQ” indicator lights up.

@1 AUTO (Auto surround) button

Press this button to select the AUTO mode from the surround modes. When this mode is selected, the receiver determines the surround mode corresponding to a digital input signal automatically.

@2 HEADPHONE jack for stereo headphones

This jack may be used to listen to the SR4001/ SR5001’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4” stereo phono plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.

Notes:

•When using headphones, the surround mode will change to STEREO and Dolby Headphone by MENU and Cursor button.

•The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack.

@3 AUX1 INPUT jacks

These auxiliary video/audio input jacks accept the connections of a camcorder, portable DVD, game etc.

ENGLISH

5