Honda Power Equipment Tractor Preparation, FL6555 Front Loader and BH6575 Backhoe, Tire Types

Page 13

TRACTOR PREPARATION

Rear Counterweight

DO NOT EXCEED THE RATING FOR MAXIMUM GROSS VEHICLE WEIGHT.

REFER TO OWNER’S MANUAL PROVIDED WITH TRACTOR.

The use of adequate counterweight for maximum loader capacity is required for properstability.

PROPER. COUNTERWEIGHT AND BALLAST FOR H6522 (A4):

FL6555 FRONT LOADER ONLY

Ag tires:

99 pounds (45 Kg) ballast in each rear tire.

75 pound (31.8 Kg) wheel weight on each rear wheel.

Three point hitch mounted with rear weight box containing 583 pounds (265 Kg) of sand.

Turf or High float:

236 pounds (107 Kg) ballast in each rear tire. Three point hitch mounted with rear weight box containing 583 pounds (265 Kg) of sand.

FL6555 FRONT LOADER AND BH6575

BACKHOE

Ag tires

99 pounds (45 Kg) ballast in each rear tire.

75 pound (31.8 Kg) wheel weight on each rear tire.

Turf or High Float:

170 Pounds (77 Kg) ballast in each’ rear tire.

Additional counteweight requirements ‘will vary with loader attachments and equipment applications.

tI0

m.Certain specific conditions may not permit safe use of loader at loader rating or may require more careful restricted operation at the rated load.

TRACTOR PREPARATION

TIRE TYPES

Agricultural (Recommended)

Turf

High Flotation

.

TIRE INFLATION:

TURF TIRES

HIGH FLOAT

 

AG TIRES

Front

30 psi

22 psi

16 psi

Rear

20 psi

20 psi

28 psi

Rear tires must be maintained at equal pressure within the recommended tire inflation range. Unequal rear tire inflation can prevent loader attachment from contacting the ground across its full width.

Roll-Over Protection Structure (ROPS) System

The tractor ROPS system must be in place and used properly to ensure adequate operator protection.

Tractor Hydraulic System

Tractor operation in a loader application significantly increases demands on the tractor hydraulic system. Check the tractor hydraulic system fluid level daily. Refer to your tractor owner’s manual for instructions

regarding tractor hydraulic system maintenance.

Follow recommendations in your Tractor Owners Manual concerning Hydraulic fluid and Filter change intervals.

Refer to tractor owners manual for hydraulic fluid specifications.

.tA

mThe tractor/loader must only be operated with all safety equipment properly installed.

Front Counterweight

Use of front counterweight is not recommended when tractor is being used in a loader application.

Front counterweight adds unnecessary front axle load in loader applications.

11

Image 13
Contents \# D OPERATOR’S ManualPage Page Loader Removal and Installation SafetyLubrication and Maintenance Service Introduction Replacement PartsSerial Number and Location Front Loader Safety SafetySafe Operating Rules Operation Before StartingSafety Maintenance Safety Information Safety Label LocationsShipping Inventory Bucket Level Indicator Tube Assy Hydraulic Hose Assembly LABEL, Hydraulic FunctionsBolt Sack Tractor Preparation Do not Exceed the Rating for Maximum Gross Vehicle WeightFL6555 Front Loader and BH6575 Backhoe Tire TypesLoader Specifications General SET-UP InstructionsBolt Head Markings Proper Torque for FastenersWITH-OUT Mower Installation SUB Frame Installation RemovalWith Mower Installation Cl0 SUB Frame Installation and Removal SUB Frame Installation and Removal ‘DRAULIC Valve Package Tubes will be easier if you Connected to the loader hydraulic valve aJT portTubes to the loader arm Loader Assembly Installation Manual Start-Up ProcedureSET-UP Instructions SET-UP Instructions Cold Weather Operation OperationBackfillinglBackgrading ScrapingLoading Transporting Material SafetyUnloading Yy-lf# Page Loader Removal Installation Start the tractor and shift the loader control Beginning of SeaSOn End of SeasonLoader Installation Movement Lubrication MaintenanceAccidental Tractor/loader shouldLift and Bucket Cylinder Rod Service IntervalCylinder Disassembly Lift and Bucket Cylinder ServiceGeneral Inspection Cylinder AssemblyLift and Bucket Cylinder Leakage Test Test ProcedureBucket Cylinder Test Disconnect from Body Piston Seal Assembly Leakage TestHydraulic Valve Relief Valve Load Check Valve ServiceValve Spools Lift Cylinder Spool FloatInstallation AssemblyRelief Valve Test/Adjustment Hydraulic Valve InstallationPressure Problem Possible Cause Trouble ShootingCorrection Problem Possible Cause Problem Problem Problem Quick Disconnect Coupler Hydraulic System SchematicSingle Lever Control Parts ListDescription REQ’D HandleSpool Steelball Orifice REF. Description REQ’D Detent SpringHydraulic Hose Valve HydraulicsREF. . . . . . . . Description Bucket Cylinder REF Description . . . . . REQ’D Boom Cylinder REF Description . . . . . REQ’D Indicator AlTACHMENT bucket level Bucket Level IndicatorParking LEG Clamp NUT Soaderboom Assembly IEFCarriage Bolt Locwasher NUT PIN Clip Description Description REQ’D Warranty Service Page

FL6555 specifications

The Honda Power Equipment FL6555 is a versatile and powerful addition to Honda's line of outdoor tools, designed to meet the needs of both professional landscapers and homeowners alike. This model excels in performance, reliability, and efficiency, making it a top choice for those looking for high-quality lawn care equipment.

One standout feature of the FL6555 is its robust engine. Powered by Honda's commercial-grade engine, the FL6555 offers impressive torque and power, ensuring efficient operation even under demanding conditions. This engine is engineered for durability and longevity, making it a dependable choice for heavy-duty tasks.

The FL6555 is equipped with a 21-inch cutting deck, which provides a wide cutting path, allowing users to complete their mowing tasks more quickly and efficiently. The cutting height can be easily adjusted, offering several options to accommodate different grass types and mowing conditions. This flexibility ensures users can achieve the perfect lawn while minimizing the time spent on maintenance.

Another notable characteristic of the Honda FL6555 is its advanced transmission system. The hydrostatic transmission offers smooth and precise control, allowing users to easily maneuver the mower over various terrains. This feature not only enhances comfort during operation but also enables a more accurate cut, further improving the overall quality of the lawn.

The FL6555 also incorporates Honda's innovative technologies aimed at enhancing ease of use. The mower features an ergonomic design with cushioned handles, making it comfortable to operate for extended periods. Additionally, the mower's lightweight construction ensures ease of transport, enabling users to move it effortlessly from one location to another.

Safety is a top priority for Honda, and the FL6555 is equipped with several safety features, including an operator presence control, which stops the engine when the user releases the handle. This design minimizes the risk of accidents, allowing for safer operation in a variety of environments.

In summary, the Honda Power Equipment FL6555 combines power, efficiency, and user-friendly features. Its robust engine, versatile cutting deck, advanced transmission, and safety mechanisms make it an ideal choice for anyone looking to maintain a beautiful lawn with ease and reliability. Whether for professional landscaping or residential upkeep, the FL6555 stands out as a reliable and effective tool in the Honda lineup.