Honda Power Equipment FL6555 manual SET-UP Instructions

Page 25

Initial Lubrication

1-

mDo not perform any

service/maintenance Operations with loader raised off ground.

Lower the loader to the ground and relieve pressure in loader hydraulic lines prior to

performing any service/maintenance operations on the tractor or loader by operating hydraulic control lever through all positions with engine off. Escaping fluid under pressure can have sufficient force to penetrate the skin, causing serious injury. Oil must be surgically removed within a few hours by a doctor familiar with this type of injury or gangrene may result. Before applying pressure to the system, be sure all connections are tight and that lines, fittings and hoses are not damaged. Fluid escaping from avery small hole can be almost invisible. Use a piece of cardboard or wood rather than your hands to search for suspected leaks.

L -

mA sudden line burst could cause the main frame to drop suddenly, causing damage to the tractor or loader or injury to personnel. Do not operate the loader if the fittings are leaking or if the hoses are damaged.

A -

mOperate the loader from the tractor seat only.

A -

wAccidental movement of control lever or leak in hydraulic system could cause main frame to drop, causing severe injury. Do not stand or walk under a raised attachment.

SET-UP INSTRUCTIONS

Check the tractor hydraulic system as outlined in the tractor owner’s manual.

When checking hydraulic system oil level, the loader should be on the ground and bucket fully retracted. (All cylinders in retracted position).

Grease all loader pivot points as indicated in lubn’cation chart.

Inspect hydraulic hoses, connections, control valve and cylinders for leakage.

If oil seepage past cylinder rod is evident, tighten cylinder rod packings by turning cylinder end cap l/4 turn clockwise. Do not over-tighten end caps as this will reduce service life of cylinder packings.

Tractor tire inflation should be checked as listed in the Tractor Preparation section to ensure tire inflation is to specifications.

Unequal rear tire inflation can result in bucket not being level to the ground.

Front tires should be maintained at maximum recommended inflation to maintain normal

tire profile with added weight of loader/material.

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents \# D OPERATOR’S ManualPage Page Loader Removal and Installation SafetyLubrication and Maintenance Service Introduction Replacement PartsSerial Number and Location Front Loader Safety SafetySafe Operating Rules Operation Before StartingSafety Maintenance Safety Information Safety Label LocationsShipping Inventory Bucket Level Indicator Tube Assy Hydraulic Hose Assembly LABEL, Hydraulic FunctionsBolt Sack Tractor Preparation Do not Exceed the Rating for Maximum Gross Vehicle WeightFL6555 Front Loader and BH6575 Backhoe Tire TypesLoader Specifications General SET-UP InstructionsBolt Head Markings Proper Torque for FastenersWITH-OUT Mower Installation SUB Frame Installation RemovalWith Mower Installation Cl0 SUB Frame Installation and Removal SUB Frame Installation and Removal ‘DRAULIC Valve Package Tubes will be easier if you Connected to the loader hydraulic valve aJT portTubes to the loader arm Loader Assembly Installation Manual Start-Up ProcedureSET-UP Instructions SET-UP Instructions Cold Weather Operation OperationBackfillinglBackgrading ScrapingLoading Transporting Material SafetyUnloading Yy-lf# Page Loader Removal Installation Start the tractor and shift the loader control Beginning of SeaSOn End of SeasonLoader Installation Movement Lubrication MaintenanceAccidental Tractor/loader shouldLift and Bucket Cylinder Rod Service IntervalCylinder Disassembly Lift and Bucket Cylinder ServiceGeneral Inspection Cylinder AssemblyLift and Bucket Cylinder Leakage Test Test ProcedureBucket Cylinder Test Disconnect from Body Piston Seal Assembly Leakage TestHydraulic Valve Relief Valve Load Check Valve ServiceValve Spools Lift Cylinder Spool FloatInstallation AssemblyRelief Valve Test/Adjustment Hydraulic Valve InstallationPressure Problem Possible Cause Trouble ShootingCorrection Problem Possible Cause Problem Problem Problem Quick Disconnect Coupler Hydraulic System SchematicSingle Lever Control Parts ListDescription REQ’D HandleSpool Steelball Orifice REF. Description REQ’D Detent SpringHydraulic Hose Valve HydraulicsREF. . . . . . . . Description Bucket Cylinder REF Description . . . . . REQ’D Boom Cylinder REF Description . . . . . REQ’D Indicator AlTACHMENT bucket level Bucket Level IndicatorParking LEG Clamp NUT Soaderboom Assembly IEFCarriage Bolt Locwasher NUT PIN Clip Description Description REQ’D Warranty Service Page

FL6555 specifications

The Honda Power Equipment FL6555 is a versatile and powerful addition to Honda's line of outdoor tools, designed to meet the needs of both professional landscapers and homeowners alike. This model excels in performance, reliability, and efficiency, making it a top choice for those looking for high-quality lawn care equipment.

One standout feature of the FL6555 is its robust engine. Powered by Honda's commercial-grade engine, the FL6555 offers impressive torque and power, ensuring efficient operation even under demanding conditions. This engine is engineered for durability and longevity, making it a dependable choice for heavy-duty tasks.

The FL6555 is equipped with a 21-inch cutting deck, which provides a wide cutting path, allowing users to complete their mowing tasks more quickly and efficiently. The cutting height can be easily adjusted, offering several options to accommodate different grass types and mowing conditions. This flexibility ensures users can achieve the perfect lawn while minimizing the time spent on maintenance.

Another notable characteristic of the Honda FL6555 is its advanced transmission system. The hydrostatic transmission offers smooth and precise control, allowing users to easily maneuver the mower over various terrains. This feature not only enhances comfort during operation but also enables a more accurate cut, further improving the overall quality of the lawn.

The FL6555 also incorporates Honda's innovative technologies aimed at enhancing ease of use. The mower features an ergonomic design with cushioned handles, making it comfortable to operate for extended periods. Additionally, the mower's lightweight construction ensures ease of transport, enabling users to move it effortlessly from one location to another.

Safety is a top priority for Honda, and the FL6555 is equipped with several safety features, including an operator presence control, which stops the engine when the user releases the handle. This design minimizes the risk of accidents, allowing for safer operation in a variety of environments.

In summary, the Honda Power Equipment FL6555 combines power, efficiency, and user-friendly features. Its robust engine, versatile cutting deck, advanced transmission, and safety mechanisms make it an ideal choice for anyone looking to maintain a beautiful lawn with ease and reliability. Whether for professional landscaping or residential upkeep, the FL6555 stands out as a reliable and effective tool in the Honda lineup.
Top Page Image Contents