Honda Power Equipment FL6555 manual Before Starting, Operation

Page 7

\

1

SAFETY

BEFORE STARTING

•The use of heavy equipment and/or pulling or lifting excessive loads may adversely affect vehicle stability and control. To avoid loss of control that can result in severe personal injury:

-Only use recommended tractor hitch attachment points.

-Limit loads to those within tractor and front loader limitations as stated in this manual and in the tractor owner’s manual.

-Be extra careful when turning or backing up, and when on uneven terrain.

-Use counterweights as indicted in this manual and the tractor owner’s manual.

•Before installing or using the front loader, carefully read all instructions and precautions.

OPERATION

. Be sure to fasten the seat belt whenever driving the tractor with the Rollover Protective Structure (ROPS) attached. Use of either device (Seat belt or ROPS) without the other will increase the chance of injury in a rollover.

. Adjust the seat belt so that it is snug.

. Be sure that the main transmission lever is in “Neutral” and the Power Take Off (PTO) levers are in the “OFF” position and brake is engaged before starting the engine.

. Operate the tractor and the loader at slow speeds until you become familiar with, all of the operating characteristics and controls.

. Do not operate the tractor or the loader until you are sure the area in front and behind is clear of people and pets.

•Sudden stops of the tractor and loader during operation could cause the tractor to overturn. Be especially careful during sharp turns and when the front loader bucket has material in it.

•Carry the front loader arms at a low position during transport. This will enhance vehicle stability and front vision.

•Using the front loader for handling large objects such as round hay bales, logs or oil drums is not recommended. These items can easily shift or roll down the loader arms causing equipment damage or severe personal injury.

.Never operate the tractor or front loader when visibility is diminished by darkness or by bad weather, your ability to see obstacles will become impaired.

.Avoid loose fill, rocks and holes. They may cause vehicle instability or cause the vehicle to overturn.

.The front loader is intended for relatively flat terrain.

.Avoid overhead wires and obstacles when the front loader is in the raised position. Contacting electric wires can cause electrocution. .

.Allow for the added length of the front loader attachment when making turns to prevent striking people or objects.

.When operating the front loader on a slope, always drive up and down the face of the grade. Turning or driving across the face of a slope may cause the tractor to ‘overturn.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents \# D OPERATOR’S ManualPage Page Loader Removal and Installation SafetyLubrication and Maintenance Service Introduction Replacement PartsSerial Number and Location Front Loader Safety SafetySafe Operating Rules Operation Before StartingSafety Maintenance Safety Information Safety Label LocationsShipping Inventory Bucket Level Indicator Tube Assy Hydraulic Hose Assembly LABEL, Hydraulic FunctionsBolt Sack Tire Types Do not Exceed the Rating for Maximum Gross Vehicle WeightTractor Preparation FL6555 Front Loader and BH6575 BackhoeLoader Specifications General SET-UP InstructionsBolt Head Markings Proper Torque for FastenersWITH-OUT Mower Installation SUB Frame Installation RemovalWith Mower Installation Cl0 SUB Frame Installation and Removal SUB Frame Installation and Removal ‘DRAULIC Valve Package Tubes will be easier if you Connected to the loader hydraulic valve aJT portTubes to the loader arm Loader Assembly Installation Manual Start-Up ProcedureSET-UP Instructions SET-UP Instructions Cold Weather Operation OperationBackfillinglBackgrading ScrapingLoading Transporting Material SafetyUnloading Yy-lf# Page Loader Removal Installation Start the tractor and shift the loader control Beginning of SeaSOn End of SeasonLoader Installation Tractor/loader should Lubrication MaintenanceMovement AccidentalLift and Bucket Cylinder Rod Service IntervalCylinder Disassembly Lift and Bucket Cylinder ServiceGeneral Inspection Cylinder AssemblyLift and Bucket Cylinder Leakage Test Test ProcedureBucket Cylinder Test Disconnect from Body Piston Seal Assembly Leakage TestHydraulic Valve Lift Cylinder Spool Float Load Check Valve ServiceRelief Valve Valve SpoolsInstallation AssemblyRelief Valve Test/Adjustment Hydraulic Valve InstallationPressure Problem Possible Cause Trouble ShootingCorrection Problem Possible Cause Problem Problem Problem Quick Disconnect Coupler Hydraulic System SchematicHandle Parts ListSingle Lever Control Description REQ’DSpool Steelball Orifice REF. Description REQ’D Detent SpringHydraulic Hose Valve HydraulicsREF. . . . . . . . Description Bucket Cylinder REF Description . . . . . REQ’D Boom Cylinder REF Description . . . . . REQ’D Indicator AlTACHMENT bucket level Bucket Level IndicatorParking LEG Clamp NUT Soaderboom Assembly IEFCarriage Bolt Locwasher NUT PIN Clip Description Description REQ’D Warranty Service Page

FL6555 specifications

The Honda Power Equipment FL6555 is a versatile and powerful addition to Honda's line of outdoor tools, designed to meet the needs of both professional landscapers and homeowners alike. This model excels in performance, reliability, and efficiency, making it a top choice for those looking for high-quality lawn care equipment.

One standout feature of the FL6555 is its robust engine. Powered by Honda's commercial-grade engine, the FL6555 offers impressive torque and power, ensuring efficient operation even under demanding conditions. This engine is engineered for durability and longevity, making it a dependable choice for heavy-duty tasks.

The FL6555 is equipped with a 21-inch cutting deck, which provides a wide cutting path, allowing users to complete their mowing tasks more quickly and efficiently. The cutting height can be easily adjusted, offering several options to accommodate different grass types and mowing conditions. This flexibility ensures users can achieve the perfect lawn while minimizing the time spent on maintenance.

Another notable characteristic of the Honda FL6555 is its advanced transmission system. The hydrostatic transmission offers smooth and precise control, allowing users to easily maneuver the mower over various terrains. This feature not only enhances comfort during operation but also enables a more accurate cut, further improving the overall quality of the lawn.

The FL6555 also incorporates Honda's innovative technologies aimed at enhancing ease of use. The mower features an ergonomic design with cushioned handles, making it comfortable to operate for extended periods. Additionally, the mower's lightweight construction ensures ease of transport, enabling users to move it effortlessly from one location to another.

Safety is a top priority for Honda, and the FL6555 is equipped with several safety features, including an operator presence control, which stops the engine when the user releases the handle. This design minimizes the risk of accidents, allowing for safer operation in a variety of environments.

In summary, the Honda Power Equipment FL6555 combines power, efficiency, and user-friendly features. Its robust engine, versatile cutting deck, advanced transmission, and safety mechanisms make it an ideal choice for anyone looking to maintain a beautiful lawn with ease and reliability. Whether for professional landscaping or residential upkeep, the FL6555 stands out as a reliable and effective tool in the Honda lineup.
Top Page Image Contents