Honda Power Equipment FL6555 Lubrication Maintenance, Movement, Accidental, Tractor/loader should

Page 37

LUBRICATION AND

MAINTENANCE

Do not perform any Service/Maintenance operations with loader raised the off ground. For additional access to tractor components remove loader.

Lower the loader to the ground and relieve pressure in loader hydraulic lines prior to

performing any service/maintenance operations on the tractor or loader.

A-

WEscaping fluid under pressure can have sufficient force to penetrate the skin, causing serious injury. Before disconnecting lines, be sure to relieve all pressure by operating control lever through all -positions with engine off. Before applying pressure to the system, be sure all connections are tight and that lines, pipes and hoses are not damaged. Fluid escaping from a very small hole can be almost invisible. Use a piece of cardboard or wood rather than your hands to search for suspected leaks.

See a doctor at once if injured by escaping fluid. Serious infection or reaction can develop if correct medical treatment is not administered immediately.

Referto “Lubrication and Maintenance Chart” for quick reference to maintenance operations.

! 1

-Asudden line burst could cause the main frame to drop suddenly, causing damage to the tractor or loader or injury to personnel. Do not operate the loader if the fittings are leaking or if the hoses are damaged.

Operate the loader from the tractor seat only.

LUBRICATION AND MAINTENANCE

! .

movement of

-Accidental

control lever or leak in hydraulic system could cause main frame to drop, causing serious injury. Do not stand or walk under a raised attachment.

Check the tractor hydraulic system as outlined in the Tractor Owner’s Manual.

-1 When checking hydraulic system oil level, the loader should be on the ground and bucket fully retracted. (All cylinders in retracted position).

Grease all loader pivot points daily (10 hours).

Inspect hydraulic hoses, connection, control

valve and cylinders for evidence of leakage.

_

(1If oil seepage past cylinder rod-is evident, tighten cylinder rod packings by turning cylinder end cap l/4 clockwise. Do not over-tighten end caps as this will reduce service life of cylinder packings.

Tractor tire inflation should be checked at recommended intervals as listed in the tractor owner’s manual to ensure tire inflation is to specifications.

Unequal rear tire inflation can result in bucket not being level to the ground.

Front tires should be maintained at maximum recommended inflation to ,maintain normal

tire profile with added weight of loader/material.

!

.

-The

tractor/loader should

only be operated with all safety equipment properly installed.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents \# D OPERATOR’S ManualPage Page Loader Removal and Installation SafetyLubrication and Maintenance Service Introduction Replacement PartsSerial Number and Location Front Loader Safety SafetySafe Operating Rules Operation Before StartingSafety Maintenance Safety Information Safety Label LocationsShipping Inventory Bucket Level Indicator Tube Assy Hydraulic Hose Assembly LABEL, Hydraulic FunctionsBolt Sack Tractor Preparation Do not Exceed the Rating for Maximum Gross Vehicle WeightFL6555 Front Loader and BH6575 Backhoe Tire TypesLoader Specifications General SET-UP InstructionsBolt Head Markings Proper Torque for FastenersWITH-OUT Mower Installation SUB Frame Installation RemovalWith Mower Installation Cl0 SUB Frame Installation and Removal SUB Frame Installation and Removal ‘DRAULIC Valve Package Tubes will be easier if you Connected to the loader hydraulic valve aJT portTubes to the loader arm Loader Assembly Installation Manual Start-Up ProcedureSET-UP Instructions SET-UP Instructions Cold Weather Operation OperationBackfillinglBackgrading ScrapingLoading Transporting Material SafetyUnloading Yy-lf# Page Loader Removal Installation Start the tractor and shift the loader control Beginning of SeaSOn End of SeasonLoader Installation Movement Lubrication MaintenanceAccidental Tractor/loader shouldLift and Bucket Cylinder Rod Service IntervalCylinder Disassembly Lift and Bucket Cylinder ServiceGeneral Inspection Cylinder AssemblyLift and Bucket Cylinder Leakage Test Test ProcedureBucket Cylinder Test Disconnect from Body Piston Seal Assembly Leakage TestHydraulic Valve Relief Valve Load Check Valve ServiceValve Spools Lift Cylinder Spool FloatInstallation AssemblyRelief Valve Test/Adjustment Hydraulic Valve InstallationPressure Problem Possible Cause Trouble ShootingCorrection Problem Possible Cause Problem Problem Problem Quick Disconnect Coupler Hydraulic System SchematicSingle Lever Control Parts ListDescription REQ’D HandleSpool Steelball Orifice REF. Description REQ’D Detent SpringHydraulic Hose Valve HydraulicsREF. . . . . . . . Description Bucket Cylinder REF Description . . . . . REQ’D Boom Cylinder REF Description . . . . . REQ’D Indicator AlTACHMENT bucket level Bucket Level IndicatorParking LEG Clamp NUT Soaderboom Assembly IEFCarriage Bolt Locwasher NUT PIN Clip Description Description REQ’D Warranty Service Page

FL6555 specifications

The Honda Power Equipment FL6555 is a versatile and powerful addition to Honda's line of outdoor tools, designed to meet the needs of both professional landscapers and homeowners alike. This model excels in performance, reliability, and efficiency, making it a top choice for those looking for high-quality lawn care equipment.

One standout feature of the FL6555 is its robust engine. Powered by Honda's commercial-grade engine, the FL6555 offers impressive torque and power, ensuring efficient operation even under demanding conditions. This engine is engineered for durability and longevity, making it a dependable choice for heavy-duty tasks.

The FL6555 is equipped with a 21-inch cutting deck, which provides a wide cutting path, allowing users to complete their mowing tasks more quickly and efficiently. The cutting height can be easily adjusted, offering several options to accommodate different grass types and mowing conditions. This flexibility ensures users can achieve the perfect lawn while minimizing the time spent on maintenance.

Another notable characteristic of the Honda FL6555 is its advanced transmission system. The hydrostatic transmission offers smooth and precise control, allowing users to easily maneuver the mower over various terrains. This feature not only enhances comfort during operation but also enables a more accurate cut, further improving the overall quality of the lawn.

The FL6555 also incorporates Honda's innovative technologies aimed at enhancing ease of use. The mower features an ergonomic design with cushioned handles, making it comfortable to operate for extended periods. Additionally, the mower's lightweight construction ensures ease of transport, enabling users to move it effortlessly from one location to another.

Safety is a top priority for Honda, and the FL6555 is equipped with several safety features, including an operator presence control, which stops the engine when the user releases the handle. This design minimizes the risk of accidents, allowing for safer operation in a variety of environments.

In summary, the Honda Power Equipment FL6555 combines power, efficiency, and user-friendly features. Its robust engine, versatile cutting deck, advanced transmission, and safety mechanisms make it an ideal choice for anyone looking to maintain a beautiful lawn with ease and reliability. Whether for professional landscaping or residential upkeep, the FL6555 stands out as a reliable and effective tool in the Honda lineup.
Top Page Image Contents