Honda Power Equipment FL6555 manual Relief Valve, Load Check Valve Service, Valve Spools

Page 44

SERVICE

Hydraulic valve

Control Valve Removal

Priorto removing control valve, ensure loader is on the ground and all hydraulic lines are relieved of oil pressure.

Label and disconnect hydraulic lines from control valve. Cap IN and RETURN lines to prevent contamination of hydraulic system.

Remove control valve mounting capscrews.

Disassembly

Refer to control valve illustration for component identification.

Remove quick disconnect couplings and adaptor fittings.

Plug all ports and thoroughly clean external areas of control valve.

Remove single lever control components to facilitatespool removal.

Relief Valve

Unscrew relief valve cap, followed by adjustment screw. Unscrew relief valve body and remove spring, cup, poppet, seat and sealing washer.

Load Check Valve Service

The spring loaded check valve is located adjacent to the bucket cylinder spool return sprfng. Malfunctioning is most unlikely, but contaminate can prevent free movement or reseating.

Remove the check valve plug to reveal the spring and poppet. Wash free of contaminate and check for free movement of poppet with valve body. Replace the poppet if damaged.

Reassemble in reverse order after valve body is clean and drav, .

Valve Spools

Prior to removal, mark valve spools to ensure they can be identified for installation in the same spool bores from which they were removed.

.Lift Cylinder Spool (Float)

Remove the detent plugs, springs and balls and remove the two detent body mounting screws. Pull valve spool from valve body (pull out from spring end of spool).

Remove the three valve spool ‘0’ rings from the valve body and one from the detent body.

Care must be taken to ensure valve body spool bores are not scratched during 0 Rjng removal.

Thoroughly clean all parts.

Inspection

Remove any nicks or burrs from valve components and inspect for evidence of excessive wear.

Inspect valve spools and valve body bores for excessive wear, scratches or damage.

Imf If internal leakage with the valve spool(s) in the spring centered position has been experienced, valve body and/or valve spool wear/damage is indicated. If this condition exists the control valve assembly must be replaced.

Inspect lift cylinder valve spool for excessive wear in the detent area.

42

Page 43 Page 45
Image 44
Page 43 Page 45
Contents OPERATOR’S Manual \# DPage Page Lubrication and Maintenance Service SafetyLoader Removal and Installation Serial Number and Location Replacement PartsIntroduction Safe Operating Rules SafetyFront Loader Safety Before Starting OperationSafety Maintenance Safety Safety Label Locations InformationShipping Inventory Bolt Sack Hydraulic Hose Assembly LABEL, Hydraulic FunctionsBucket Level Indicator Tube Assy Do not Exceed the Rating for Maximum Gross Vehicle Weight Tractor PreparationFL6555 Front Loader and BH6575 Backhoe Tire TypesLoader Specifications SET-UP Instructions GeneralProper Torque for Fasteners Bolt Head MarkingsWith Mower Installation SUB Frame Installation RemovalWITH-OUT Mower Installation Cl0 SUB Frame Installation and Removal SUB Frame Installation and Removal ‘DRAULIC Valve Package Tubes to the loader arm Connected to the loader hydraulic valve aJT portTubes will be easier if you Loader Assembly Installation Start-Up Procedure ManualSET-UP Instructions SET-UP Instructions Operation Cold Weather OperationScraping BackfillinglBackgradingLoading Unloading SafetyTransporting Material Yy-lf# Page Loader Removal Installation Start the tractor and shift the loader control End of Season Beginning of SeaSOnLoader Installation Lubrication Maintenance MovementAccidental Tractor/loader shouldService Interval Lift and Bucket Cylinder RodGeneral ServiceCylinder Disassembly Lift and Bucket Cylinder Cylinder Assembly InspectionBucket Cylinder Test Disconnect from Test ProcedureLift and Bucket Cylinder Leakage Test Piston Seal Assembly Leakage Test BodyHydraulic Valve Load Check Valve Service Relief ValveValve Spools Lift Cylinder Spool FloatAssembly InstallationPressure Hydraulic Valve InstallationRelief Valve Test/Adjustment Correction Trouble ShootingProblem Possible Cause Problem Possible Cause Problem Problem Problem Hydraulic System Schematic Quick Disconnect CouplerParts List Single Lever ControlDescription REQ’D HandleREF. Description REQ’D Detent Spring Spool Steelball OrificeValve Hydraulics Hydraulic HoseREF. . . . . . . . Description Bucket Cylinder REF Description . . . . . REQ’D Boom Cylinder REF Description . . . . . REQ’D Parking LEG Bucket Level IndicatorIndicator AlTACHMENT bucket level Carriage Bolt Locwasher NUT PIN Clip Soaderboom Assembly IEFClamp NUT Description Description REQ’D Warranty Service Page

FL6555 specifications

The Honda Power Equipment FL6555 is a versatile and powerful addition to Honda's line of outdoor tools, designed to meet the needs of both professional landscapers and homeowners alike. This model excels in performance, reliability, and efficiency, making it a top choice for those looking for high-quality lawn care equipment.

One standout feature of the FL6555 is its robust engine. Powered by Honda's commercial-grade engine, the FL6555 offers impressive torque and power, ensuring efficient operation even under demanding conditions. This engine is engineered for durability and longevity, making it a dependable choice for heavy-duty tasks.

The FL6555 is equipped with a 21-inch cutting deck, which provides a wide cutting path, allowing users to complete their mowing tasks more quickly and efficiently. The cutting height can be easily adjusted, offering several options to accommodate different grass types and mowing conditions. This flexibility ensures users can achieve the perfect lawn while minimizing the time spent on maintenance.

Another notable characteristic of the Honda FL6555 is its advanced transmission system. The hydrostatic transmission offers smooth and precise control, allowing users to easily maneuver the mower over various terrains. This feature not only enhances comfort during operation but also enables a more accurate cut, further improving the overall quality of the lawn.

The FL6555 also incorporates Honda's innovative technologies aimed at enhancing ease of use. The mower features an ergonomic design with cushioned handles, making it comfortable to operate for extended periods. Additionally, the mower's lightweight construction ensures ease of transport, enabling users to move it effortlessly from one location to another.

Safety is a top priority for Honda, and the FL6555 is equipped with several safety features, including an operator presence control, which stops the engine when the user releases the handle. This design minimizes the risk of accidents, allowing for safer operation in a variety of environments.

In summary, the Honda Power Equipment FL6555 combines power, efficiency, and user-friendly features. Its robust engine, versatile cutting deck, advanced transmission, and safety mechanisms make it an ideal choice for anyone looking to maintain a beautiful lawn with ease and reliability. Whether for professional landscaping or residential upkeep, the FL6555 stands out as a reliable and effective tool in the Honda lineup.
Top Page Image Contents