Honda Power Equipment FL6555 manual Assembly, Installation

Page 45

Hydraulic Valve

If spool does not stay in “detent” position or tends to be difficult to get into “detent”, “detent spool” wear and/or weak detent springs are indicated and suspected parts should be replaced.

Inspect valve spool r&urn springs for evidence of distortion/damage.

If valve spool(s) was not centering properly and valve spool slides freely in valve body, a weak or broken return spring is indicated.

Inspect relief valve spring for damage or distortion.

Inspect relief valve poppet and seat for wear or damage.

Assembly

It is recommended that all ‘0’ rings be replaced during valve service.

Referto illustration for reference to assembly.

Thoroughly clean and dry all parts.

Carefully install the ‘0’ rings in the valve body spool and detent body ‘0’ ring grooves.

Coat ‘0’ rings with clean hydraulic oil prior to

.installation.

Extreme care must be taken to ensure ‘0’ rings are not damaged during installation

Valve Spools

Assemble spool return springs on valve spools if they were removed previously. .

Install detent body on float spool.

Coat valve spools with clean hydraulic oil and carefully install in valve body.

Extreme care must be taken during valve spool installations to ensure ‘0’ rings are not damaged.

“Float” valve spool is installed in valve body adjacent to return port.

SERVICE

Install end cap on detent body

Install detent balls, springs and plugs.

Install support, spring, spacer and end cap on valve body/bucket cylinder spool.

Torque hardware to 2-3ftJlbs.

Relief Valve

Install sealing washer, seat, poppet, spring, dup and body.

Screw in relief valve adjustment screw until the spring just begins to compress and install crushwasher, hex nut, second crushwasher and cap.

Relief valve adjustment is made following control valve installation as described under “Relief Valve Adjustment”.

Control lever and hydraulic connections

Install single lever control linkage as illustrated.

Install adaptor fittings and quick disconnect couplers.

Inspect adaptor fitting ‘0’ rings and replace if required.

Installation

Mount control valve on front loader valve stand and reconnect hydraulic hoses to ports from which they were removed.

Refer to hydraulic system schematic diagram to check that hydraulic connections are correct.

Relief valve setting should be adjusted immediately following installation/start-up as described under relief valve adjustment.

43

Page 44 Page 46
Image 45
Page 44 Page 46
Contents \# D OPERATOR’S ManualPage Page Safety Loader Removal and InstallationLubrication and Maintenance Service Replacement Parts IntroductionSerial Number and Location Safety Front Loader SafetySafe Operating Rules Operation Before StartingSafety Maintenance Safety Information Safety Label LocationsShipping Inventory Hydraulic Hose Assembly LABEL, Hydraulic Functions Bucket Level Indicator Tube AssyBolt Sack Tractor Preparation Do not Exceed the Rating for Maximum Gross Vehicle WeightFL6555 Front Loader and BH6575 Backhoe Tire TypesLoader Specifications General SET-UP InstructionsBolt Head Markings Proper Torque for FastenersSUB Frame Installation Removal WITH-OUT Mower InstallationWith Mower Installation Cl0 SUB Frame Installation and Removal SUB Frame Installation and Removal ‘DRAULIC Valve Package Connected to the loader hydraulic valve aJT port Tubes will be easier if youTubes to the loader arm Loader Assembly Installation Manual Start-Up ProcedureSET-UP Instructions SET-UP Instructions Cold Weather Operation OperationBackfillinglBackgrading ScrapingLoading Safety Transporting MaterialUnloading Yy-lf# Page Loader Removal Installation Start the tractor and shift the loader control Beginning of SeaSOn End of SeasonLoader Installation Movement Lubrication MaintenanceAccidental Tractor/loader shouldLift and Bucket Cylinder Rod Service IntervalService Cylinder Disassembly Lift and Bucket CylinderGeneral Inspection Cylinder AssemblyTest Procedure Lift and Bucket Cylinder Leakage TestBucket Cylinder Test Disconnect from Body Piston Seal Assembly Leakage TestHydraulic Valve Relief Valve Load Check Valve ServiceValve Spools Lift Cylinder Spool FloatInstallation AssemblyHydraulic Valve Installation Relief Valve Test/AdjustmentPressure Trouble Shooting Problem Possible CauseCorrection Problem Possible Cause Problem Problem Problem Quick Disconnect Coupler Hydraulic System SchematicSingle Lever Control Parts ListDescription REQ’D HandleSpool Steelball Orifice REF. Description REQ’D Detent SpringHydraulic Hose Valve HydraulicsREF. . . . . . . . Description Bucket Cylinder REF Description . . . . . REQ’D Boom Cylinder REF Description . . . . . REQ’D Bucket Level Indicator Indicator AlTACHMENT bucket levelParking LEG Soaderboom Assembly IEF Clamp NUTCarriage Bolt Locwasher NUT PIN Clip Description Description REQ’D Warranty Service Page

FL6555 specifications

The Honda Power Equipment FL6555 is a versatile and powerful addition to Honda's line of outdoor tools, designed to meet the needs of both professional landscapers and homeowners alike. This model excels in performance, reliability, and efficiency, making it a top choice for those looking for high-quality lawn care equipment.

One standout feature of the FL6555 is its robust engine. Powered by Honda's commercial-grade engine, the FL6555 offers impressive torque and power, ensuring efficient operation even under demanding conditions. This engine is engineered for durability and longevity, making it a dependable choice for heavy-duty tasks.

The FL6555 is equipped with a 21-inch cutting deck, which provides a wide cutting path, allowing users to complete their mowing tasks more quickly and efficiently. The cutting height can be easily adjusted, offering several options to accommodate different grass types and mowing conditions. This flexibility ensures users can achieve the perfect lawn while minimizing the time spent on maintenance.

Another notable characteristic of the Honda FL6555 is its advanced transmission system. The hydrostatic transmission offers smooth and precise control, allowing users to easily maneuver the mower over various terrains. This feature not only enhances comfort during operation but also enables a more accurate cut, further improving the overall quality of the lawn.

The FL6555 also incorporates Honda's innovative technologies aimed at enhancing ease of use. The mower features an ergonomic design with cushioned handles, making it comfortable to operate for extended periods. Additionally, the mower's lightweight construction ensures ease of transport, enabling users to move it effortlessly from one location to another.

Safety is a top priority for Honda, and the FL6555 is equipped with several safety features, including an operator presence control, which stops the engine when the user releases the handle. This design minimizes the risk of accidents, allowing for safer operation in a variety of environments.

In summary, the Honda Power Equipment FL6555 combines power, efficiency, and user-friendly features. Its robust engine, versatile cutting deck, advanced transmission, and safety mechanisms make it an ideal choice for anyone looking to maintain a beautiful lawn with ease and reliability. Whether for professional landscaping or residential upkeep, the FL6555 stands out as a reliable and effective tool in the Honda lineup.
Top Page Image Contents