Marantz SR8002, SR7002 manual Basic Operation, USE Mode, Preset Mode

Page 20

BASIC OPERATION

USE MODE

(Normal operation status)

This remote controller is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD/CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifier).

Learning is not necessary for Marantz products. You can use these products without setting any codes.

1. Press the SOURCE button.

For this example, press DVD.

DVD is shown on the LCD, and the remote controller is set for DVD.

Pressing the SOURCE button once changes the remote control to the settings for the source that was pressed.

To change the amplifier or other source, press the SOURCE button twice (double-click). The code is sent, and then the amplifi er source changes to DVD.

2. Press the buttons to operate the DVD.

The indicator is shown on the LCD while the remote control codes are being transmitted. It is not displayed when buttons without stored code are pressed.

3. The direct buttons can be used to perform up to 20 operations for each of the 12 sources, including DVD, TV, AMP, and other AV equipment.

The buttons consist of the D1 to D5 buttons, and the equipment is operated by pressing the buttons corresponding to the indicators on the LCD.

Four pages are available, and press the > button to select a page. The current page position is displayed on the LCD.

PRESET MODE

(When operating non-Marantz AV equipment products)

This remote controller is preset with remote control codes from AV equipment by other manufacturers. The preset codes are TV, VCR, LD, CABLE, DSS, DVD, TAPE, TUNER, CD/CD-R, MD and AMP. Settings can be made in one of two ways.

When the preset codes are set, the following codes are contained in the SOURCE button of the remote controller.

See the attached manufacturer number list for the preset manufacturers, devices, preset numbers, and other settings.

Remote control

Corresponding

Device name

source name

preset code

 

TV

TV

Television

DVD

DVD

DVD player

VCR

VCR

Video deck

DSS

SATELLITE

Satellite broadcasting

 

 

tuner equipment

TUNER

RECEIVER/TUNER

AM FM TUNER

CD

CD/CD-R PLAYER

CD player

CD-R

CD/CD-R PLAYER

CD recorder

MD

CD/CD-R PLAYER

MD deck

TAPE

TAPE

Cassette deck

AUX1

CABLE

Cable television

AUX2

LASER DISC

Laser disc player

AMP

AMPLIFIER

Amplifier or receiver

 

RECEIVER/TUNER

 

•When using Marantz products, TV and DVD can be set to TV1 (TV/VDP: Projector) and TV2 (PDP: Plasma display), and DVD1 (first DVD player) and DVD2 (second DVD player), respectively, to match the customer’s operating environment. These settings are made in PRESET mode.

In the factory default state, the remote controller is set to TV1 and DVD1. To make the presets, enter the numbers below while referring to the section “Entering and Setting the Manufacturer Number Directly”.

TV1: 0001, TV2: 0002

DVD1: 0001, DVD2: 0002

Entering and Setting the Manufacturer Number Di- rectly

Refer to the manufacturer number list.

This example shows how to set a SAMSUNG DVD player.

2

 

 

 

 

 

3

 

 

 

 

 

4

 

LEARN

 

 

 

 

 

 

LEARN

 

 

 

 

 

 

LEARN

 

NAME

 

 

 

 

 

 

NAME

 

 

 

 

 

 

NAME

 

MACRO

 

 

 

 

 

 

MACRO

 

 

 

 

 

 

MACRO

 

USE

PAGE

1

2

3

4

 

USE

PAGE

1

2

3

4

 

USE

PAGE 1 2 3 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LEARN

 

 

 

 

 

 

LEARN

 

 

 

 

 

 

 

 

NAME

 

 

 

 

 

 

NAME

 

 

 

 

 

 

 

 

MACRO

 

 

 

 

 

 

MACRO

 

 

 

 

 

 

 

 

USE

PAGE

1

2

3

4

 

USE

PAGE

1

2

3

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. View the supplied manufacturer number list, and find the number of the manufacturer for the device that you are using.

2. Hold down the M button for three seconds or more.

The menu is displayed.

3. Press the D1 (PRESET) direct button.

The Preset setting (P-SET) is displayed.

4. Press the DVD source button.

5. Press the numeric buttons to enter the four- digit manufacturer number.

Example: To enter “0600” from the manufacturer number list.

To correct the entered number, use the 1 or 2 cursor button to enter the correct number.

•If no button is pressed for over one minute during the setting process, any settings that were made are cancelled.

6.Press the OK cursor button.

7.Confirm the OK is displayed and then the display returns to the Preset Setting (P-SET).

When the manufacturer number is entered correctly, OK is displayed momentarily on the screen.

•If you enter a number not in the manufacturer number list, WRONG CODE is displayed, and then you return to the preset setting again

Check the manufacturer number list, and either set a different number or use the sequence function to set.

8.To set the manufacturer number for another source device, repeat the procedure in steps 4 to 6.

9.After the settings are completed, press the M button.

10. Press the buttons on the remote controller to check that the DVD can be operated correctly.

Setting Equipment Not Appearing in Manufacturer Number List

Use the sequence function to set equipment not appearing in the manufacturer number list. You may still be unable to set some equipment even when using the sequence function. In this case, the remote controller can be programmed with codes individually. In the sequence function, the power ON/OFF codes are transmitted by pressing the remote controller buttons in order.

If the power for the equipment is left on, hold down the button until the equipment is turned off, and then release. This completes the setting.

This example shows how to set a DVD player.

4

 

5

7

 

LEARN

 

 

LEARN

 

LEARN

 

NAME

 

 

NAME

 

NAME

 

MACRO

 

 

MACRO

 

MACRO

 

USE

PAGE 1 2 3 4

 

USEPAGE 1 2 3 4

 

USEPAGE 1 2 3 4

 

 

 

 

 

 

 

 

1.

Turn on the power of the DVD player.

2.

Hold down the M button for three seconds or

 

more.

 

 

 

 

 

 

The menu is displayed.

 

 

 

3. Press the D1 (PRESET) direct button.

The Preset setting (P-SET) is displayed.

4. Press the DVD source button.

5. Hold down the CH+ or CH– button for one second or more.

6. Press the CH+ button repeatedly in the interval for one second.

The signal is transmitted, and the display cycles through the code number.

Press the CH– button to go back to a number screen.

7. Release the button once the DVD player turns off.

8. Press the OK cursor button.

9. Confirm the OK is displayed and then the display returns to the Preset Setting (P-SET).

10. To set the manufacturer number for another source device, repeat the procedure in steps 4 to 8.

11. After the settings are completed, press the M button.

12. Press the buttons on the remote controller to check that the DVD can be operated correctly.

Check the following points if the equipment which was set does not operate properly.

•If there is more than one number in the manufacturer number list, try setting a different number.

•There may be some buttons which cannot be used. Program the codes to the required buttons.

ENGLISH

17

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model SR7002/SR8002 User Guide Read Before Operating Equipment AC Polarized PlugNEC National Electrical Code Accessories Check Remote Controller RC8001SRIntroduction User GuideTable of Contents FeaturesDescription Copyright ProtectionHdcd THX Select2 Dts Digital SurroundDts Neo6 Dts Digital Surround ESAbout Dolby Pro Logic Before USE Operation of Remote Controller Remote ControlBattery Replacement Interval RC8001SR Loading BatteriesAUDIO/ Video Names and FunctionFront Panel FL Display and Indicater Rear Panel Multi Speaker / Speaker C0AC Outlets OutputRemote Control @1AUDIO IN/OUT TV, DVD, VCR1, DSS/VCR2, TAPE, CD/CDR@3VIDEO IN/OUT TV, DVD, VCR1, DSS/VCR2 @4HDMI Input / OutputLCD Indicators RC8001SR Setting the Time Tuner ModeGeneral Information of RC8001SR to the Unit Checking the TimePause Controlling Marantz ComponentsStop Turns the VCR on and off Call up the menuExits the programming menu RecordDock connector on Dock connector OFFTurns the Tape deck on Turns the Tape deck offUSE Mode Preset ModeEntering and Setting the Manufacturer Number Di- rectly Setting Equipment Not Appearing in Manufacturer Number ListWhen OK Programming the 2 Play and Other Control ButTons and Numeric Buttons Programming the Direct Buttons and Rewriting NamesErasing Programmed Codes Returning to Initial Settings Erasing Buttons and Erasing Direct ButtonsErasing Direct Button Pages Erasing SourcesProgramming Macros Erasing AllProgramming Macros Executing Macro ProgramsWhen clearing macros, the macros programmed to Inserting Steps in Macro ProgramsErasing Steps of Macro Programs Overwriting Steps in Macro ProgramsClone Mode Setup Setting the Lighting TimeSetting the Macro Interval Time Adjusting the Display ContrastOperation RC101 ⁄2 DISC+/T.MODEGeneral Information of RC101 to the Unit Controlling a Marantz TV TVZone a Multi room a control Zone B Multi room B control Zone D Main room controlControlling a Marantz VCR Deck VCR1/ VCR2 Controlling a Marantz Satellite Broadcasting Tuner DSSControlling a Marantz Tuner T1 Controlling a Marantz DVD Player DVDControlling a Marantz Universal Dock AUX1 Enter 3CURSOR 4CURSOR 2CURSOR 1CURSORNormal Mode Setting the Back LightResetting the Code Programming with the 4-DIGIT CodeLearn Mode Learning ProcedureChange the Multi Room Control Commands for Each Zone Creating copies using clone modeCopying entire contents Other OperationsSpeaker Placement Connecting SpeakersConnecting Speaker Wire ConnectionsConnecting Audio Components Connecting a SubwooferConnecting Video Components VIDEO, S-VIDEO, Component JacksVideo jack Component jackHdmi Jack Connecting Hdmi ComponentsConnecting Hdmi Components Connecting AN External Power Amplifier Advanced ConnectingConnecting Multi Channel Audio Source Connecting the Antenna Terminals Connecting the XM CONNECT-AND-PLAY Antenna How to SubscribeSee the Checking the XM Signal Strength and Radio ID XM Radio OverviewConnecting for the Multi Room Connecting for Speaker C USEMultiroom B Multiroom aConnecting Other Equipment DC OUT DC TriggerEmitter OUT SR8002 Only FlasherSetup Onscreen Display Menu SystemInput Setup P Surround Setup PSpeaker Setup P Video Setup P Preference PInput Setup Func Input SetupCH Input Setup Func RenameFunc Input Setup Assignable Digital Input 7.1 CH Input SetupDefault Function RenameBack SpaceSpkr Speaker Setup Auto SetupManual Setup THX Audio SetupAuto Setup MultEQ Setup feature Unit measures sound characteristicsAutomatically optimizes settings To do this, the Auto Setup feature measures aExample Confirmation screen for speaker detection OK/ENTER buttonError Messages Cause How to RemedySpeaker Distance Manual SetupSpeaker Size THX Audio Setup Speaker LevelAdvanced Speaker Array ASA Speaker type and positioningSurround Setup Channel LevelNEO6 Parameter PLIIx PRO Logic IIx Music ParameterCsiiparameter Video Setup Video ConvertPreference Multi Room Setup DC Trigger SetupAcoustic EQ Preset G. EQ ADJ ResetCheck Auto FrequencySelecting the Surround Mode Using the unitUsing the remote controller Dialogue Normalization MessageVideo Convert Adjusting the Tone Bass & Treble ControlUsing the Sleep Timer Convert Surround ModeFor setting instructions, see SBR Auto Source DirectPure Direct EX/ESStereo THX GamesMulti CH. MOVIE, Music THX CinemaSelecting Analog Audio Input or Digital Audio Input Listening Through HeadphonesRecording AN Analog Source Dolby Headphone Mode Attenuation to Analog Input SignalSpeaker A/B CH InputDual Backup Memory AUX2 InputVideo ON/OFF LIP.SYNCAuto Tuning Manual TuningBasic Operation Listening to the TunerPreset Memory FM Tuning Mode Auto Stereo or MonoAuto Preset Memory Manual Preset MemoryRecalling a Preset Station Preset Channel List DisplaySorting Preset Stations Clearing Stored Preset StationsAnalog/Digital Auto Mode For Listening to HD Radio Stations SR8002 onlyThan 2 seconds → B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP →Signal Strong Switching HD-RADIO Information Inthe Front Panel FL DisplayUsing the SR8002 Selecting Multicast Channels PTY Auto SearchMulticast Channels Press the SCAN+ D1 or SCAN- D2 buttonWhen the Text 1 Radio Text is displayed Rbds Operation SR8002 onlyRadio Text Rbds DisplaySwitching XM Information in the Front Panel Display Signal MarginalSignal NON Listening to XM Satellite RadioSearch Mode Preset Search ModeALL Channel Search Mode When the Artist name/Song title is displayedYou can store the desired channel in the Preset MemoryFM/AM stations Tune into the desired channelNeural Surround Mode Multi Room Playback Using the Multi Multi Room SystemRoom OUT Terminals Speaker TerminalsPower ON/OFF RC101 for Multiroom aRC101 for Multiroom B SourceTroubleshooting Symptom Cause RemedySymptom Cause Remedy HdmiXM Satellite Radio HD Radio ReceptionAccessories HOW to Reset the UnitDimensions Front KEY Button Lock of the UnitSetup Codes AmplifierRECEIVER/TUNER RECEIVER/TUNER Cable SatelliteTape Deck CD/CD-R Player Laser DiskIii VCR Source button name TV Source button name VCRVCR DVD Source button name VCR Source button name DVDDirect Button 1141 1002, 10091059 1117DSS Is a registered trademark
Related manuals
Manual 94 pages 51.53 Kb

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.
Top Page Image Contents