Marantz SR8002, SR7002 manual Preset Scan, Neural Surround Mode

PRESET SCAN

			M
			D1
			D2
			D3
			D4
USE	PAGE	2	D5
TV	DVD	VCR	DSS
TUNER	CD	CD-R	MD
TAPE	AUX1	AUX2	AMP
		LIGHT
1			2

RC8001SR

Learning Remote Controller

3.5.

2.

5.

1.

CH		VOL
	OK
	LIP.SYNC
PREV		MUTE
	GUIDE
MENU		EXIT
TEST	CH.SEL	SURR
1	2	3
7.1CH	ATT	SPK-AB
4	5	6
DISP	OSD	SLEEP

CLEARING STORED PRESET STATIONS

You can remove preset stations from the memory using the following procedure.

2.	3.
	TEST	CH.SEL	SURR
	1	2	3
	7.1CH	ATT	SPK-AB
	4	5	6
SURROUND	DISP	OSD	SLEEP	3.
DIGITAL
	7	THX	9
AAC
	CLEAR	0	MEMO	2.

TV DVD VCR DSS

TUNER CD CD-R MD

NEURAL SURROUND MODE

When the XM Satellite Radio broadcast received supports XM HD Surround Sound, Surround playback is possible in Neural Surround mode.

M

D1

D2

D32.

	D4	1.
	D5
USE	PAGE 1

1. Press the > button until PAGE 2 is displayed.

2. Press the NEURAL (D4) button to tune in the Neural surround mode.

ENGLISH

1. Press the TUNER button twice within two seconds on the remote controller.

2. Press the > button until PAGE 2 is displayed.

3. press the P-SCAN (D4) button on the remote controller. “PRESET SCAN” appears on the display and then the preset station with the lowest preset number is recalled first.

4. Preset stations are recalled in sequence (No.1

→ No.2 → etc.) for about 5-10 seconds each. The time changes by the received condition. No stored preset number will be skipped.

5.Pressing the CH+ button during prescanning speeds up scanning.

Also, pressing the CH– button returns to the previous preset station.

When the desired preset station is received, cancel the preset scan operation by press the P-SCAN (D4) button.

1. Recall the preset number to be cleared with the method described in ”PRESET SEARCH MODE”.

2. Press the MEMORY button on the front panel or Press the MEMO button on the remote controller.

3. The stored preset number blinks in the display for 5 seconds.WhiIe blinking, Press the CLEAR button on the front panel or the remote.

4. “xx CLEAR” appears on the dispIay to indicate that the specified preset number has been cleared.

Note:

•To clear all stored preset stations, press and hold the CLEAR and the ENTER buttons for two seconds.

•There are 60 preset channels prepared at the factory default. The 60 channels are all set to “CHANNEL 001”. Each channel can be stored in the preset memory. You can search for only the preset channels.

Note:

For information on Neural Surround, see page 63.

77