Marantz SR7002 and SR8002 Manual - A Comprehensive Guide

ENGLISH

Caution:

• Be sure to use speakers with the speciﬁed impedance as

shown on the rear panel of this unit.

• To prevent damage to circuitry, do not let the bare

CONNECTING AUDIO COMPONENTS

CD recorder

Tape Deck

speaker wires touch each other and do not let them

touch any metal part of this unit.

OUT IN

DIGITAL DIGITAL

L L INPUT OUTPUT

R R

L R R L

OUT IN

L L

R R

L R L R

Analog Audio

L R

•Do not touch the speaker terminals when the power is on. It may cause you to receive an electric shocks.

•Do not connect more than one speaker cable to one speaker terminal. Doing so may damage this unit.

Note:

•Be sure to connect the positive and negative cables for the speaker properly. If they are miss-connected, the signal phase will be reversed and the signal quality will be corrupted.

CONNECTING A SUBWOOFER

Use the PRE OUT SUBWOOFER jack to connect a powered subwoofer (power ampliﬁer built in ).

If your subwoofer is a passive type (power ampliﬁer is not built in), connect a monaural power ampliﬁer to the PRE OUT SUBWOOFER jack and connect the subwoofer to the ampliﬁer.

The output audio signal from the TAPE OUT jack and

Digital Audio (coaxial)

Digital Audio (optical)

R L R L

CONNECTING DIGITAL AUDIO COMPONENTS

Notes:

the CD/CD RECORDER OUT jack is the same signal which is currently selected.

Caution:

•Do not connect this unit and other components to mains power until all connections between components have been completed.

Notes:

•Insert all plugs and connectors securely. Incomplete connections may make noise.

•Be sure to connect the left and right channels properly.

Red connectors are for the R (right) channel, and white connectors are for the L (left) channel.

•Be sure to connect input and output properly.

•Refer to the instructions for each component that is connected to this unit.

•Do not bind audio/video connection cables with power cords and speaker cables this will result in generating a hum or other noise.

•There are 6 digital inputs, 3 coaxial jacks and 3 optical jacks, on the rear panel. You can use these jacks to input PCM, Dolby Digital and DTS bitstream signals from a CD, DVD, or other digital source components.

•There is one digital output coaxial jack and one optical output jack on the rear panel. These jacks can be connected to a CD recorder, or a MD deck inputs, respectively.

•Refer to the instructions for each component. To setup the digital audio format of DVD player, or other digital source’s connected to digital input jacks.

•Use ﬁ ber optical cables (optical) for DIG-1,2,3 input jacks. Use 75 ohms coaxial cables (for digital audio or video) for DIG-4, 5, 6 input jacks.

•You can designate the input for each digital input/ output jacks according to your component. See page 43.

•There is no Dolby Digital RF input jack. Use an external RF demodulator Dolby Digital decoder when connecting the Dolby Digital RF output jack of the videodisc player to the digital input jack.

•The digital signal jacks on this unit conform to the EIA standard. If you use a cable that does not conform to this standard, this unit may not function properly.

•Each type of audio jack works independently. Signals input through the digital and analog jacks are output through the corresponding digital and analog jacks, respectively.

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.