Marantz SR8002, SR7002 manual Manual Setup, Speaker Size, Speaker Distance

Page 52

2-2 MANUAL SETUP

1. Select “2. SPKR SETUP” from the MAIN MENU.

2. Select “MANUAL SETUP” with the 3 or 4 cursor buttons.

3. Press the OK/ENTER button to enter the selection.

<SPEAKER SIZE>

 

SPEAKER

SIZE

THX

SPKR

:

NO

 

SUB

W

: YES

FRONT

: SMALL

CENTER

: SMALL

SURR .

: SMALL

SURR . B

: 2CH

SURR . B SIZE

: SMALL

LPF/HPF

: 80Hz

BASS

MIX

:

 

 

RETURN

NEXT

When setting the speaker size in the SPEAKER SIZE menu, use the guidelines below.

LARGE:

The complete frequency range for the channel you are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting that are lower than approx. 80 Hz will be output from the subwoofer.

If the SUB. W is set to “NONE” and the front speakers are set to “LARGE,” then the sound will be output from both the left and right speakers.

4. Select each speaker with the 3 or 4 cursor buttons.

5. Set the size of each speaker with the 1 or 2 cursor buttons.

6. After you complete this portion of the setup, move the cursor to “NEXT” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button to go to the next page.

THX SPKR

If you are using a full THX speaker systems which are approved by THX Ltd:

•The front, center and surround speaker size should be “SMALL”.

•The subwoofer should be “YES”.

•LPF/HPF (the crossover frequency) should be “80Hz”.

You need to set the number of surround back speakers and the surround back speaker size should be “SMALL”.

SUB W

YES:

Select when a subwoofer is connected.

NO:

Select when a subwoofer is not connected.

FRONT

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

•If “NO” is selected for the subwoofer setting, then this setting is fixed at “LARGE”.

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURR.

NONE:

Select if no surround left and right speakers are connected.

LARGE:

Select if the surround left and right speakers are large.

SMALL:

Select if the surround left and right speakers are small.

SURR. B

NONE:

Select if no surround back left and right speakers are connected.

2CH:

Select if the surround back left and right speakers are connected.

1CH:

Select if one surround back speaker is connected. In this case, the audio signal is emitted from the SURR BACK LEFT output terminal.

Notes:

•If “NONE” is selected for the SURR. setting, then this setting is fixed to “NONE.”

SURR. BACK SIZE

LARGE:

Select if the surround back speakers are large.

SMALL:

Select if the surround back speakers are small.

Note:

•If “NONE” is selected for the SURR. setting, then this setting is not available.

LPF/HPF

When you use a subwoofer, you can select the cutoff frequency for the small speakers used. Select one of the crossover frequency levels according to the size of the small speakers connected.

60Hz → 80Hz → 100Hz → 120Hz → 140Hz → 160Hz → 180Hz

Note:

•If using small front speakers, set a slightly higher frequency. If using large front speakers, set a slightly lower frequency.

BASS MIX

•The bass mix setting is only valid when “LARGE” is set for the front speakers and “YES” is set for the subwoofer during stereo playback.

This setting has effect only during playback of PCM or analog stereo sources.

•When “BOTH” is selected, the low frequencies will be played through the main L&R speakers and the subwoofer.

In this playback mode, the low frequency range expands more uniformly throughout the room, but depending on the size and shape of the room, interference may result in a decrease of the actual volume of the low frequency range.

•By selecting “MIX”, the low frequencies will play through the main L&R only. This selection is preferred by THX.

Note:

•LFE signals during playback of Dolby Digital or DTS will be played through the subwoofer.

7.After you complete this portion of the setup, move the cursor to “NEXT” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button to go to the next page.

<SPEAKER DISTANCE>

SPEAKER DISTANCE

UNIT

 

:

 

ft

 

 

FRONT

L

:

10 . 0

ft

CENTER

 

:

10 . 0

ft

FRONT

R

:

10 . 0

ft

SURR . R

 

:

10 . 0

ft

SURR . B

R

:

10 . 0

ft

SURR . B

L

:

10 . 0

ft

SURR . L

 

:

10 . 0

ft

SUB W

 

:

10 . 0

ft

RETURN

 

BACK

 

 

 

EXIT

Use this menu to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances.

Begin by determining the ideal or most commonly used seating position in the room.

This is important for the timing of the acoustics to create the proper sound space that the unit and today’s sound systems are able to produce.

Note:

•For speakers for which you have selected “NONE”, the speaker configuration sub-menu will not appear here. (There are several useful books and special DVD and LD’s available to guide you through proper home theater configuration. If you are unsure, have your Marantz dealer perform the installation for you. They are trained professionals familiar with even the most sophisticated custom installations. Marantz recommends the www.cedia.org website for further information.)

8.Select either m (meters) or ft (feet) for UNIT with the 1 or 2 cursor buttons.

9.Select each speaker with the 3 or 4 cursor buttons.

10. Set the distance for each speaker , press the 1 or 2 cursor buttons.

FRONT L:

Set the distance from the front left speaker to your normal listening position.

CENTER:

Set the distance from the center speaker to your normal listening position.

FRONT R:

Set the distance from the front right speaker to your normal listening position.

SURR. L:

Set the distance from the surround left speaker to your normal listening position.

SURR. R:

Set the distance from the surround right speaker to your normal listening position.

ENGLISH

49

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Model SR7002/SR8002 User Guide Read Before Operating Equipment AC Polarized PlugNEC National Electrical Code Accessories Check Remote Controller RC8001SRIntroduction User GuideTable of Contents FeaturesHdcd Copyright ProtectionDescription THX Select2 Dts Digital SurroundDts Neo6 Dts Digital Surround ESAbout Dolby Pro Logic Before USE Operation of Remote Controller Remote ControlBattery Replacement Interval RC8001SR Loading BatteriesFront Panel Names and FunctionAUDIO/ Video FL Display and Indicater Rear Panel Multi Speaker / Speaker C0AC Outlets OutputRemote Control @1AUDIO IN/OUT TV, DVD, VCR1, DSS/VCR2, TAPE, CD/CDR@3VIDEO IN/OUT TV, DVD, VCR1, DSS/VCR2 @4HDMI Input / OutputLCD Indicators RC8001SR Setting the Time Tuner ModeGeneral Information of RC8001SR to the Unit Checking the TimeStop Controlling Marantz ComponentsPause Turns the VCR on and off Call up the menuExits the programming menu RecordDock connector on Dock connector OFFTurns the Tape deck on Turns the Tape deck offUSE Mode Preset ModeEntering and Setting the Manufacturer Number Di- rectly Setting Equipment Not Appearing in Manufacturer Number ListWhen OK Programming the 2 Play and Other Control ButTons and Numeric Buttons Programming the Direct Buttons and Rewriting NamesErasing Programmed Codes Returning to Initial Settings Erasing Buttons and Erasing Direct ButtonsErasing Direct Button Pages Erasing SourcesProgramming Macros Erasing AllProgramming Macros Executing Macro ProgramsWhen clearing macros, the macros programmed to Inserting Steps in Macro ProgramsErasing Steps of Macro Programs Overwriting Steps in Macro ProgramsClone Mode Setup Setting the Lighting TimeSetting the Macro Interval Time Adjusting the Display ContrastOperation RC101 ⁄2 DISC+/T.MODEGeneral Information of RC101 to the Unit Controlling a Marantz TV TVZone a Multi room a control Zone B Multi room B control Zone D Main room controlControlling a Marantz VCR Deck VCR1/ VCR2 Controlling a Marantz Satellite Broadcasting Tuner DSSControlling a Marantz Tuner T1 Controlling a Marantz DVD Player DVDControlling a Marantz Universal Dock AUX1 Enter 3CURSOR 4CURSOR 2CURSOR 1CURSORNormal Mode Setting the Back LightResetting the Code Programming with the 4-DIGIT CodeLearn Mode Learning ProcedureChange the Multi Room Control Commands for Each Zone Creating copies using clone modeCopying entire contents Other OperationsSpeaker Placement Connecting SpeakersConnecting Speaker Wire ConnectionsConnecting Audio Components Connecting a SubwooferConnecting Video Components VIDEO, S-VIDEO, Component JacksVideo jack Component jackConnecting Hdmi Components Connecting Hdmi ComponentsHdmi Jack Connecting Multi Channel Audio Source Advanced ConnectingConnecting AN External Power Amplifier Connecting the Antenna Terminals Connecting the XM CONNECT-AND-PLAY Antenna How to SubscribeSee the Checking the XM Signal Strength and Radio ID XM Radio OverviewConnecting for the Multi Room Connecting for Speaker C USEMultiroom B Multiroom aConnecting Other Equipment DC OUT DC TriggerEmitter OUT SR8002 Only FlasherSetup Onscreen Display Menu SystemInput Setup P Surround Setup PSpeaker Setup P Video Setup P Preference PInput Setup Func Input SetupCH Input Setup Func RenameFunc Input Setup Assignable Digital Input 7.1 CH Input SetupDefault Function RenameBack SpaceSpkr Speaker Setup Auto SetupManual Setup THX Audio SetupAuto Setup MultEQ Setup feature Unit measures sound characteristicsAutomatically optimizes settings To do this, the Auto Setup feature measures aExample Confirmation screen for speaker detection OK/ENTER buttonError Messages Cause How to RemedySpeaker Size Manual SetupSpeaker Distance THX Audio Setup Speaker LevelAdvanced Speaker Array ASA Speaker type and positioningSurround Setup Channel LevelCsiiparameter PLIIx PRO Logic IIx Music ParameterNEO6 Parameter Video Setup Video ConvertPreference Multi Room Setup DC Trigger SetupAcoustic EQ Preset G. EQ ADJ ResetCheck Auto FrequencySelecting the Surround Mode Using the unitUsing the remote controller Dialogue Normalization MessageUsing the Sleep Timer Adjusting the Tone Bass & Treble ControlVideo Convert For setting instructions, see Surround ModeConvert SBR Auto Source DirectPure Direct EX/ESStereo THX GamesMulti CH. MOVIE, Music THX CinemaRecording AN Analog Source Listening Through HeadphonesSelecting Analog Audio Input or Digital Audio Input Dolby Headphone Mode Attenuation to Analog Input SignalSpeaker A/B CH InputDual Backup Memory AUX2 InputVideo ON/OFF LIP.SYNCAuto Tuning Manual TuningBasic Operation Listening to the TunerPreset Memory FM Tuning Mode Auto Stereo or MonoAuto Preset Memory Manual Preset MemoryRecalling a Preset Station Preset Channel List DisplaySorting Preset Stations Clearing Stored Preset StationsAnalog/Digital Auto Mode For Listening to HD Radio Stations SR8002 onlyThan 2 seconds → B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP →Using the SR8002 Switching HD-RADIO Information Inthe Front Panel FL DisplaySignal Strong Selecting Multicast Channels PTY Auto SearchMulticast Channels Press the SCAN+ D1 or SCAN- D2 buttonWhen the Text 1 Radio Text is displayed Rbds Operation SR8002 onlyRadio Text Rbds DisplaySwitching XM Information in the Front Panel Display Signal MarginalSignal NON Listening to XM Satellite RadioSearch Mode Preset Search ModeALL Channel Search Mode When the Artist name/Song title is displayedYou can store the desired channel in the Preset MemoryFM/AM stations Tune into the desired channelNeural Surround Mode Multi Room Playback Using the Multi Multi Room SystemRoom OUT Terminals Speaker TerminalsPower ON/OFF RC101 for Multiroom aRC101 for Multiroom B SourceTroubleshooting Symptom Cause RemedySymptom Cause Remedy HdmiXM Satellite Radio HD Radio ReceptionAccessories HOW to Reset the UnitDimensions Front KEY Button Lock of the UnitSetup Codes AmplifierRECEIVER/TUNER RECEIVER/TUNER Cable SatelliteTape Deck CD/CD-R Player Laser DiskIii VCR Source button name TV Source button name VCRVCR DVD Source button name VCR Source button name DVDDirect Button 1141 1002, 10091059 1117DSS Is a registered trademark
Related manuals
Manual 94 pages 51.53 Kb

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.
Top Page Image Contents