Setup, Onscreen Display Menu System | Marantz SR7002, SR8002

ENGLISH

SETUP

After all components are connected, initial setup must be performed.

ONSCREEN DISPLAY MENU SYSTEM

This unit incorporates an onscreen menu system, which makes various operations possible by using the cursor (3, 4, 1 , 2) and OK/ENTER buttons on the remote controller or on the front panel.

Note:

• To view the onscreen displays, make certain you

have connected the MONITOR OUT jack on the rear

panel to the composite, S-Video, component video

or HDMI input of your TV or projector. (See page

33, 34)

1. Press the AMP button on the remote controller.

(This step is not needed when operating the

setup menus from the unit.)

2. Press the MENU button on the remote controller

or press the MENU button on the front panel.

The “MAIN MENU” of the OSD menu system is

displayed.

There are 6 items in the MAIN MENU.

3. Select the desired sub-menu with the 3 or

4 cursor buttons and press the OK/ENTER

RC8001SR BUTTON CONTROL

CHVOL

LEFT button		OK
OK button
		LIP·SYNC
	PREV		MUTE
		GUIDE
	MENU		EXIT
	TEST	CH.SEL	SURR
MENU button	1	2	3
MENU button	7.1CH	ATT	SPK-AB

4 5 6

Press this button to display the OSD menu system.

SR7002/SR8002 FRONT BUTTON CONTROL

UP button

RIGHT button

DOWN button

EXIT button

Press this button to exit the OSD menu system.

button. The display will change to the selected

sub-menu.

Notes:

•If you desire to adjust any sub-menu, you need to set it to UNLOCKED.

•To lock sub-menus, set items 1-6 on the MAIN MENU to “LOCKED”.

<LOCKING SUBMENUS>

(1)Move the cursor to “1. INPUT SETUP” in the

MAIN MENU.

(2)Select the “0” mark left of “LOCKED” with the 1 or 2 cursor buttons.

4.To exit from OSD menu system, press the EXIT button, or move the cursor to EXIT and press the OK/ENTER button.

Note:

•Settings are entered with the ENTER button on the unit or the OK button on the remote controller. When using the remote controller, use the OK button as if it were the ENTER button.

		UP button	ENTER button
	MULTI
AUTO	MULTI SPEAKER	BAND T-MODE	MEMORY
	7.1CH INPUT	DISPLAY
THX			M-DAX
LEFT button	MENU	EXIT	RIGHT button
		ENTER

MIC

MENU button		EXIT button
Press this button to display the		Press this button to exit the
Press this button to display the	DOWN button	Press this button to exit the
OSD menu system.	DOWN button	OSD menu system.

AMP (Ampliﬁer) button

TUNER CD CD-R MD

TAPE	AUX1	AUX2	AMP
		LIGHT
1			2

RC8001SR

Learning Remote Controller

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.